How to Use the Datatool Blade 433 Key Fob
The Datatool Blade 433 key fob has two buttons: a large one and a small one. The large button is used to arm and disarm the alarm, while the small button is used to activate the panic mode and service mode. Here are the basic functions of the key fob:
To arm the alarm, press the large button once. The alarm will beep once and the indicators will flash once.
To disarm the alarm, press the large button again. The alarm will beep twice and the indicators will flash twice.
To activate the panic mode, press and hold the large button for three seconds. The alarm will sound and the indicators will flash continuously. To stop the panic mode, press the large button again.
To activate the service mode, turn on the ignition, then press and hold the small button until you hear a beep . The service mode allows you to remove the battery without triggering the alarm. To exit the service mode, turn off the ignition.
How to Troubleshoot the Datatool Blade 433 Key Fob
Some common issues that may occur with the Datatool Blade 433 key fob are:
The key fob does not work or has a weak signal. This may be caused by a low battery or interference from other devices. To replace the battery, open the key fob case and insert a new CR2032 lithium battery. Make sure the battery is inserted correctly and that the contacts are clean. To avoid interference, keep the key fob away from metal objects and other electronic devices.
The key fob is lost or stolen. If you lose your key fob or suspect that it has been stolen, you should contact Datatool as soon as possible. They will be able to deactivate your old key fob and provide you with a new one. You will need to provide your vehicle registration number and proof of purchase.
The key fob is damaged or broken. If your key fob is damaged or broken, you should contact Datatool for a replacement. Do not attempt to repair the key fob yourself, as this may void your warranty and damage your security system.
We hope this article has helped you understand how to use and troubleshoot your Datatool Blade 433 key fob. For more information, please visit the Datatool website or consult your user manual.
a104e7fe7e