Landirenzo Software Omegas 2010

Landi Renzo software Omegas 2010

Landi Renzo is a leading company in the design, production and distribution of alternative fuel systems and components for LPG and CNG vehicles. Landi Renzo offers a range of software solutions for the calibration and diagnosis of its products, such as Omegas, Omegas 3.0, Omegas Direct 1.0/3.0, EVO and EVO12.

Omegas is the software program that allows the installer to calibrate and diagnose the Landi Renzo sequential injection systems. Omegas is compatible with Windows operating systems and requires a USB interface cable to connect the PC to the vehicle's ECU. Omegas can perform various functions, such as:

Download File

Reading and modifying the ECU parameters and maps

Performing self-calibration and auto-adaptation procedures

Monitoring the system status and displaying real-time data

Recording and analyzing data logs

Updating the ECU firmware

Performing diagnostic tests and clearing error codes

The latest version of Omegas is 4.2.0.85, which was released in March 2020. This version includes several updates and improvements, such as:

New firmware available for OMEGAS ECUs

Split the list of OMEGAS ECUs between LRE194 and LRE198

Updated the parameters of the basic configuration of the "GI 25" injectors

Optimized the basic calibrations with the use of GIRS12 injectors

Updated texts in various languages

Solved small display problems

F1 Gas change-over, various page modifications

New KIT with EVO ECU and GIRS12 injectors

Injector type: when setting AEB_EVO it is now also possible to set the size of the nozzles

Injector type: when setting "Landi GIRS12, it is now possible to also set the XXS size

The "Manual injection sequence" function depends on whether the "Type of rev signal" item is selected

Buzzer: it is possible to activate/deactivate the beep of the switch when switching from petrol to gas and when the gas reserve LED comes on

Gas level: with LROMEGAS3 ECU, setting 8 cylinders, at the "Low pressure value for change back" parameter, the default value was set to 0.5 bar for LPG and 1.25 bar for CNG

Advanced: the petrol contribution map has been inserted

Autocalibration: you can check the "Correction over 2500m above sea level" box

The previous version of Omegas was 3.2.0, which was released in October 2019. This version was compatible with Omegas, Omegas 3.0, Omegas Direct 1.0/3.0, EVO and EVO12 systems.

The Omegas software program is available for download from various sources, such as HybridSupply or MHH AUTO. However, it is recommended to always use the official Landi Renzo website or authorized distributors to obtain the latest and most reliable version of the software.

: [Landi Renzo OMEGAS Software Program 4.2.0.85 HybridSupply] : [Landi Renzo Omegas Software 3.2.0 (Omegas, Omegas 3.0, Omegas Direct 1.0/3.0, EVO, EVO12) HybridSupply] : [Landi Renzo Omegas 4.2.0.85s(c) FULL VMWare - MHH AUTO]

0493d141df