Today, the 7.35 Carcano is a rare and obsolete cartridge that is not commercially available. However, if you own a 7.35 Carcano rifle and want to shoot it, you can handload your own ammo using reloading data from various sources. In this article, we will show you how to reload 7.35 Carcano ammo using some examples of reloading data from different sources.
What You Need to Reload 7.35 Carcano Ammo
To reload 7.35 Carcano ammo, you will need the following components and equipment:
Brass cases: You can use either new or once-fired brass cases that are specifically made for the 7.35 Carcano cartridge. You can also use resized 6.5x52mm Carcano cases or trimmed 6.5x55mm Swedish cases, but they may not fit or function well in your rifle.
Bullets: You will need bullets that have a diameter of .300 inch (7.62mm), which is slightly smaller than the standard .308 inch (7.82mm) bullets used for most .30 caliber cartridges. You can use either jacketed or cast bullets, but make sure they have a suitable weight and shape for your rifle and intended use.
Powder: You will need smokeless powder that is suitable for medium-sized rifle cartridges. You can use either single-base or double-base powders, but make sure they have a burning rate that matches the bullet weight and velocity you want to achieve.
Primers: You will need large rifle primers that are compatible with your brass cases and powder choice. You can use either standard or magnum primers, but make sure they provide enough ignition for your powder charge.
Reloading press: You will need a reloading press that can handle rifle cartridges and has a die set for the 7.35 Carcano caliber. You can use either a single-stage or a progressive press, depending on your preference and budget.
Reloading dies: You will need a set of reloading dies that includes a full-length resizing die, a neck-sizing die (optional), a bullet seating die, and a crimping die (optional). You can also use a factory crimp die if you want to apply a stronger crimp to your cartridges.
Reloading scale: You will need a reloading scale that can measure powder charges accurately and consistently. You can use either a mechanical or an electronic scale, but make sure it has a resolution of at least 0.1 grain.
Reloading manual: You will need a reloading manual that provides reliable and safe reloading data for the 7.35 Carcano cartridge. You can use either a printed or an online manual, but make sure it has data from reputable sources and follows the industry standards.
Other tools and accessories: You may also need some other tools and accessories to complete your reloading process, such as a case trimmer, a case cleaner, a primer pocket cleaner, a chamfering tool, a deburring tool, a powder funnel, a powder trickler, a bullet puller, a case gauge, a caliper, and a chronograph.
How to Reload 7.35 Carcano Ammo
To reload 7.35 Carcano ammo, you will need to follow these basic steps:
Prepare your brass cases: Inspect your brass cases for any defects or damage, such as cracks, splits, dents, or corrosion. Clean your brass cases using either dry media or wet media, depending on your preference and equipment. Trim your brass cases to the correct length using a case trimmer, if necessary. Chamfer and deburr the case mouths using a chamfering tool and a deburring
c8f7815bcf