We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-02 · 6 min read · Independent comparison
If you want a tidy, drill-free way to get four controllers, a headset and a keyboard off your desk and onto the wall, choose 6amLifestyle 4; if you need a belt-clip volume box that lets you adjust a personal monitor mix on stage without walking back to the rack, choose StudioMan PM1-X.
• 6amLifestyle 4 — biggest strength: Four foldable ABS holders in one kit, each with an adhesive option rated to 3.3 lbs and a screw option rated to 6.6 lbs, so one purchase solves storage for a whole console-and-headset setup.
• 6amLifestyle 4 — biggest trade-off: It holds gear, it doesn't process audio. Nothing here touches your signal, and the adhesive route is only as good as the surface you stick it to.
• StudioMan PM1-X — biggest strength: An XLR stereo input, a mono/stereo switch, an analog volume knob and a 3.5 mm output in an 80 g metal body with a belt clip — real level control you can wear.
• StudioMan PM1-X — biggest trade-off: It drives headphones, it doesn't store them. No mount, no adhesive, no screws, and the volume control is manual with no noise-cancelling or digital features.
• Who each is for: 6amLifestyle 4 for gamers, streamers and collectors drowning in controllers and headsets. StudioMan PM1-X for musicians, engineers and performers who need a volume knob on their hip.
Start with what this actually is, because the name undersells it. The 6amLifestyle 4 is a four-pack of foldable controller wall mounts. Each holder has a 90° adjustable fold, so it can sit flat against a wall, tuck under a desk, or hide behind a monitor. When you don't need it, it folds down and mostly disappears. That fold is the whole point — a mount you can flatten is a mount you stop resenting.
Compatibility is broad and clearly spelled out: Xbox Series X/S, Xbox One, Xbox 360, PS5 DualSense, PS4, PS3, Nintendo Switch Pro, GameCube, plus most third-party pads. The same hooks double as a keyboard holder and a headset or headphone hanger, which is why the kit works as a whole-desk reset rather than a single-purpose gadget. The rubber pads and smooth edges are there to stop the slipping and scratching that cheap plastic hooks cause, and the ABS body is built for the long haul.
Buy it if you have more controllers than shelf space, or a headset that keeps landing on the floor. Skip it if your problem is audio, not clutter — this holds your gear, it never touches your sound.
StudioMan PM1-X: Who It's For
The StudioMan PM1-X is a different species of product entirely, and that's worth being blunt about. It's a wired personal monitor volume controller: an XLR locking jack takes a stereo feed, a mono/stereo switch sets how that feed is handled, an analog knob controls output level, and a 3.5 mm stereo jack sends the result to your in-ears or headphones.
The mono/stereo switch is the genuinely useful part. Mono suits mixer aux sends and mono sources; stereo suits headphone outputs and stereo sources. If you've ever tried to monitor a stereo mix through a mono feed and wondered why it sounded wrong, that switch is the fix. Power handling tops out at 100 mW and it works with headphone impedances from 32Ω to 600Ω, which covers everything from cheap in-ears up to high-impedance studio cans. The dynamic driver detail in the listing describes the earpiece side of the product family rather than a speaker you'd hear from across the room.
Physically it's tiny — 31 x 31 x 88 mm, 80 g (0.2 lbs) — in a metal enclosure with a built-in belt clip, so it rides on a belt or waistband through a whole set. Connectivity is wired only, there's no wireless tech, no noise cancelling, and the control is analog rather than digital. Ships as one unit in a retail box with a user manual and a one-year manufacturer warranty.
Buy it if you perform or track with in-ears and need level control within arm's reach. Skip it if you're looking for a headphone stand, or if your headphones are wireless — this is a wired, cabled tool.
• Best for decluttering a gaming setup → 6amLifestyle 4. Four holders, one kit, controllers plus headset plus keyboard handled.
• Best for controlling monitor volume on stage → StudioMan PM1-X. The knob sits on your belt, not across the room.
• Best for renters who can't drill → 6amLifestyle 4. The adhesive route needs no holes, rated to 3.3 lbs per mount.
• Best for heavy gear → 6amLifestyle 4. Screws and anchors take it to 6.6 lbs per mount.
• Best for mixed mono and stereo sources → StudioMan PM1-X. The mono/stereo switch is the deciding feature.
• Best for high-impedance headphones → StudioMan PM1-X. It's rated from 32Ω to 600Ω with up to 100 mW.
• Best for portability → StudioMan PM1-X. 80 g and a belt clip versus a wall-mounted kit.
• Best for a wireless headphone owner → 6amLifestyle 4. It just hangs them; the PM1-X needs a cable.
These two aren't rivals — they solve different problems, and the honest answer is that the right pick depends on which problem is currently ruining your desk or your gig. If I had to choose one for the average person reading this, I'd take the 6amLifestyle 4. Most people searching this comparison are trying to stop controllers and headsets from colonising every flat surface, and four foldable mounts with both adhesive and screw options do that job with no learning curve. I'd reach for the StudioMan PM1-X only if you're specifically a performer or engineer who needs a wired volume knob on your hip. Buy the one that matches your mess.
how to switch headphones between devices
Switch the source, not the headphone, wherever you can. If your headphones are wired, unplug the cable from one device and plug it into the other; if you're using a controller like the StudioMan PM1-X, move its XLR input to the new feed and keep the 3.5 mm jack on your headphones. Wireless headphones pair per device, so you'll need to re-pair or use a multipoint-capable model.
how to switch headphones to headset windows 11
Windows 11 treats a headset as both an output and an input, so you often have to set them separately. Open Sound settings, pick your headset under Output, then under Input select the headset microphone rather than the built-in mic array. If the mic doesn't appear, check that the headset's 3.5 mm plug is fully seated or that its USB adapter is recognised.
how to switch headphones to speakers on computer
Click the speaker icon in the taskbar and choose your speakers from the output list — Windows remembers per-app choices, so you may need to set it again inside a specific app. On a desktop, the fastest route is often just unplugging the headphone jack and letting the speakers take over. Neither product here does that switching for you; the PM1-X only controls the level going to your headphones.
how to switch headphones left right
Swapping channels is a software or wiring job, not a hardware one. In Windows, open Sound settings, select your output device, go to Properties, and use the balance or channel sliders to flip which side plays which channel. On wired setups you can also physically reverse the cable if the connectors allow it — but check your mix first, since reversed channels are a classic monitoring mistake.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: BORAYDA Beanie vs ZHENYEMEI 3D, CCA CRA vs ooopusX Op.24, LEFXMOPHY Case Cover Replacement vs kwmobile Case Compatible, Amazon Renewed SONY vs Technics