To fix the 49 service error on HP Printer, the printer may have a clogged ink cartridge. To clear the obstruction, press and hold the Cancel button while powering on your printer and then select Start from the control panel.
For the 49 Service Error message to show up on your HP printer's display, it means that there is a problem with the firmware flash on the printer. Most of the time, this error comes up due to device failure or corrupted firmware. If your printer has been able to print prior to this error popping up, follow these instructions below:
If you are getting an error message that says, "Service 49," it is possible that your printer has become disconnected from the network. Try reconnecting the printer to the router and try to print again. If that doesn't solve the problem, check that your computer and printer are on the same Wi-Fi network with a strong signal.
What is the 49 Service Error Code for HP Printers?
The 49 service error is a problem that suggests your printer is out of paper. This usually occurs when you are printing more than one page and it's time to replace the paper tray.
How to Get the 49 Service Error on Your HP Printer?
The 49 service error on your printer means that the printer is experiencing a hardware issue. This could be because of a paper jam, lack of ink, or low paper levels in the tray. You may also need to replace a cartridge.
If you're not sure what's causing the problem, try unplugging the printer and then plugging it back in again. If you still get the 49 error, contact HP support or take your printer to an authorized retailer for assistance.
References: