Official Wiko Lenny Stock Rom For SP-Flashtool

Official Wiko Lenny Stock Rom for SP-Flashtool

Wiko Lenny is a budget-friendly Android smartphone that features a 5-inch TFT display, a dual-core MediaTek MT6572 processor, 512 MB of RAM, 4 GB of internal storage, a 5 MP rear camera, a 1.3 MP front camera, and a 1800 mAh battery. The device runs on Android 4.4.2 KitKat operating system and supports dual SIM functionality.

If you own a Wiko Lenny device and want to flash the official stock firmware on it, you can use the SP-Flashtool to do so. SP-Flashtool is a Windows and Linux application that allows flashing firmware, custom ROMs, and recovery images onto MediaTek-based Android smartphones and tablets. It is a free and open-source tool developed by MediaTek Inc.

DOWNLOAD

In this article, we will show you how to download and use the SP-Flashtool to flash the official Wiko Lenny stock ROM on your device. Please note that flashing firmware may erase your data and void your warranty, so proceed at your own risk.

Prerequisites

A Wiko Lenny device with at least 50% battery charge.

A USB cable to connect your device to your computer.

A Windows or Linux computer with SP-Flashtool installed. You can download the latest version of SP-Flashtool from [here] for Windows or [here] for Linux.

The official Wiko Lenny stock ROM file. You can download it from [here].

The MediaTek driver for your device. You can download it from [here].

A backup of your data, in case something goes wrong.

Steps to flash Wiko Lenny stock ROM using SP-Flashtool

Extract the downloaded Wiko Lenny stock ROM file to a folder on your computer.

Extract the downloaded SP-Flashtool file to a folder on your computer.

Install the MediaTek driver on your computer by following the instructions in the driver package.

Launch the SP-Flashtool.exe (for Windows) or flash_tool (for Linux) from the extracted SP-Flashtool folder.

Click on the Scatter-loading button and browse to the extracted Wiko Lenny stock ROM folder. Select the MT6572_Android_scatter.txt file and click Open.

The SP-Flashtool will load the firmware files automatically. Make sure all the boxes are checked except Preloader.

Click on the Download button at the top of the SP-Flashtool window.

Turn off your Wiko Lenny device and remove the battery (if possible).

Connect your device to your computer using the USB cable. The SP-Flashtool will detect your device and start flashing the firmware.

Wait for the flashing process to complete. You will see a green circle with a check mark when it is done.

Disconnect your device from your computer and insert the battery (if removed).

Turn on your device and enjoy the official Wiko Lenny stock ROM.

Troubleshooting

If you encounter any errors or issues while using the SP-Flashtool, you can try the following solutions:

Make sure you have installed the correct MediaTek driver for your device and computer.

Make sure you have downloaded the correct Wiko Lenny stock ROM file for your device model and region.

Make sure you have extracted the Wiko Lenny stock ROM file and the SP-Flashtool file properly.

Make sure you have selected the correct scatter file in the SP-Flashtool.

Make sure you have unchecked the Preloader box in the SP-Flashtool.

Make sure your device has enough battery charge before flashing.

Try using a different USB cable or USB port to connect your device to your computer.

Try using a different computer to flash your device.

Try flashing your device in Firmware Upgrade mode instead of Download mode in the SP-Flashtool.

If none of the above solutions work, you can contact the Wiko customer support or visit a nearby service center for further assistance.

Conclusion

In this article, we have shown you how to download and use the SP-Flashtool to flash the official Wiko Lenny stock ROM on your device. We hope this guide was helpful and easy to follow. If you have any questions or feedback, feel free to leave a comment below.

a7a7d27f09