How to Install the All in 1 HDD Docking WLXKJ-875 Driver
To use the All in 1 HDD Docking WLXKJ-875, you need to install the driver software on your computer. The driver software is a program that allows your computer to communicate with the device and recognize the HDDs connected to it. There are two ways to install the driver software: manually or automatically.
Manually Installing the Driver Software
If you have the CD-ROM that came with the device, you can use it to install the driver software manually. Follow these steps:
Insert the CD-ROM into your computer's CD/DVD drive.
Open the CD-ROM folder and find the file named "Setup.exe". Double-click on it to run the installer.
Follow the instructions on the screen to complete the installation.
Restart your computer when prompted.
If you do not have the CD-ROM, you can download the driver software from the internet. Follow these steps:
Go to [this website] and click on "Software Resources".
Click on "1-Wire Drivers" and then click on "Click to Go to Download Page".
Select your operating system and file type from the drop-down menus and click on "Download". Save the file to your computer.
Open the downloaded file and run the installer. Follow the instructions on the screen to complete the installation.
Restart your computer when prompted.
Automatically Installing the Driver Software
If you have an internet connection, you can use Windows Update to install the driver software automatically. Follow these steps:
Connect the All in 1 HDD Docking WLXKJ-875 to your computer via USB 2.0 or eSATA cable.
Turn on the power switch on the back of the device.
Wait for Windows to detect the device and search for the driver software online.
If Windows finds the driver software, it will install it automatically. You will see a notification on your screen when it is done.
If Windows does not find the driver software, it will ask you if you want to search for it online or browse for it on your computer. Choose "Search automatically for updated driver software" and follow the instructions on the screen.
How to Use the All in 1 HDD Docking WLXKJ-875
After installing the driver software, you can use the All in 1 HDD Docking WLXKJ-875 to access your HDDs. Follow these steps:
Connect one or two HDDs of different sizes and types (IDE or SATA) to the device. Make sure they are properly inserted into their slots and secured with screws if needed.
Connect the device to your computer via USB 2.0 or eSATA cable.
Turn on the power switch on the back of the device.
Wait for your computer to recognize the HDDs as external drives. You will see them appear in My Computer or This PC as new drive letters (such as E: or F:).
You can now open, copy, delete, or transfer files between the HDDs and your computer as you normally would with any external drive.
If you want to clone one HDD to another, you can use the one-touch backup button on the front of the device. Follow these steps:
Connect two HDDs of identical size and type (IDE or SATA) to the device.
Connect the device to your computer via USB 2.0 or eSATA cable.
Turn on the power switch on the back of the device.
Press and hold the one-touch backup button for 3 seconds. The LED indicator will flash to show that the cloning process has started.
Wait for the cloning process to finish. The LED indicator will stop flashing and stay on when it is done.
You can now disconnect the HDDs from the device and use them as you wish.
Troubleshooting Tips
If you encounter any problems while using the All in 1 HDD Docking WLXKJ-875, you can try these tips:
Make sure the HDDs are compatible with the device. The device supports 2.5" and 3.5" IDE and SATA HDDs up to 2 TB each.
Make sure the HDDs are formatted and partitioned before using them with the device. You can use Windows Disk Management or other disk management tools to do this.
Make sure the driver software is installed correctly on your computer. You can check this in Device Manager or Control Panel.
Make sure the USB 2.0 or eSATA cable is securely connected to both the device and your computer.
Make sure the power adapter is plugged into a working power outlet and connected to the device.
Make sure the power switch on the back of the device is turned on.
If you have any questions or need further assistance, you can contact the manufacturer or visit their website for more information.
Conclusion
The All in 1 HDD Docking WLXKJ-875 is a handy device that allows you to connect up to two HDDs of different sizes and types (IDE or SATA) to your computer via USB 2.0 or eSATA ports. You can use it to transfer data between the HDDs, backup your files, clone your disks, or access your old drives without opening your computer case. In this article, we showed you how to install and use the All in 1 HDD Docking WLXKJ-875 driver on your Windows PC. We hope you found this article helpful and informative.
524038ac18