How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to turn any TV, stereo, treadmill or projector into a wireless listening station, choose 1Mii RCA; if you need headphones built into a blackout sleep mask you can actually lie down in, choose Perytong Sleep Mask. Those are two completely different jobs, and that is exactly why this comparison matters. One is an audio bridge for gear you already own. The other is a wearable for your bed, your seat and your carry-on.
• 1Mii RCA's biggest strength: It's a 2-in-1 Bluetooth transmitter and receiver with 3.5mm AUX and RCA in/out, Bluetooth 5.3, aptX Low Latency and up to 30 hours of playback — so it adapts to almost any wired audio device instead of replacing it.
• 1Mii RCA's biggest trade-off: It is not headphones. You still need your own Bluetooth headphones or speaker, and low-latency performance depends on those headphones also supporting aptX Low Latency (otherwise you may see 70–200ms of delay).
• Perytong Sleep Mask's biggest strength: A true 2-in-1 — sleep mask plus over-ear Bluetooth audio in one washable, foldable unit with 3D contoured eye cups, 100% blackout, Bluetooth 5.4 and a built-in mic.
• Perytong Sleep Mask's biggest trade-off: It's a single-purpose wearable. There's no jack of any kind, so it can only play wirelessly, and its audio is tuned around sleep and relaxation rather than critical listening on a big system.
• Choose 1Mii RCA if you already own good headphones and want to feed them audio from a TV, PC, home stereo, speaker, projector, treadmill or car stereo.
• Choose Perytong Sleep Mask if you want the headphones and the eye mask to be the same object — for side sleeping, travel, meditation, ASMR or office naps.
The 1Mii ML302+ is best understood as a translator, not a speaker. It takes audio from a wired source and hands it to Bluetooth gear — or does the reverse and pulls Bluetooth audio into a wired system. Out of the box it works with both 3.5mm AUX and RCA connections, which covers a surprising amount of household hardware: TVs, PCs, home stereo systems, speakers, projectors, gym equipment like treadmills, and car stereo systems. The rule is simple: in transmitter mode, plug it into your device's AUDIO OUT jack; in receiver mode, plug it into AUDIO IN.
There's a physical volume button on the unit, and a genuinely useful battery readout — press the Bluetooth button three times and the LEDs flash one to five times, each flash meaning about 20% charge. With up to 30 hours of playback from roughly 3 hours of charging, and a 300 mAh lithium-polymer cell, that readout is the difference between trusting the device and guessing at it. Bluetooth 5.3 with aptX-Adaptive and aptX Low Latency support is aimed at one specific, very common problem: lip-sync delay when watching TV. It also supports dual connections, so two people can listen to the same movie or album on separate Bluetooth headphones at once.
Who should buy it: anyone with a good pair of Bluetooth headphones who wants them to work with a TV, stereo, treadmill or projector — and anyone who wants a spare Bluetooth receiver to bring an older wired speaker system into the wireless era. Households where two people want to watch the same late-night movie at different volumes are a particularly natural fit.
Who should skip it: anyone who wants headphones included, anyone who mostly listens from a phone, and anyone who wants audio while lying on their side in bed. This is a table-top, wired-input accessory. If your Bluetooth headphones don't support aptX Low Latency, you'll fall back to another codec and may notice 70–200ms of delay — worth knowing before you commit.
The Perytong PTL01 solves a problem 1Mii simply can't touch: listening in bed without anything digging into your ears or your face. It combines a sleep mask and wireless headphones into one lightweight wearable, with ultra-thin speakers that sit over your ears rather than pressing on them. The 3D contoured eye cups are the detail that matters most here — they're shaped to avoid pressure on your eyelids and lashes while blocking light completely, which is what makes it workable for side sleepers and for anyone sensitive to ambient light.
The controls are push-button and placed in the middle of the band, so you can adjust without taking the mask off — a small design decision that makes a big difference at 2 a.m. Bluetooth 5.4 handles pairing with smartphones, tablets and laptops, and there's a built-in microphone for hands-free calls, which quietly makes this a decent home-office accessory too. Audio is HD stereo, aimed at sleep music, ASMR, meditation guides, audiobooks and white noise rather than at resolving detail in a complex mix.
Charge and build: up to 12 hours of continuous playback, USB-C charging with the port placed away from your face, and a construction of premium memory foam plus skin-friendly cotton fabric that's machine-washable once you remove the control module. It's also foldable and ships with a travel pouch, which is why it earns its place on long flights, camping trips, yoga nidra sessions and office power naps.
Who should skip it: anyone who wants to connect to a TV, stereo or projector through a wired jack — there is no jack at all here. And if you need serious noise cancellation, note that this mask has no active noise control; the blackout is for your eyes, not your ears.
Side-by-Side: Which Should You Choose?
• Best for TV and movie audio without waking the house → 1Mii RCA. Bluetooth 5.3 with aptX Low Latency targets lip-sync delay, and TX mode plugs into your TV's audio out.
• Best for listening while lying on your side → Perytong Sleep Mask. 3D contoured eye cups and ultra-thin over-ear speakers are built for that exact position.
• Best for battery life → 1Mii RCA. Up to 30 hours of playback versus up to 12 hours on the mask.
• Best for travel and naps → Perytong Sleep Mask. Foldable, machine-washable, comes with a travel pouch, and does two jobs in one item.
• Best for dual listeners → 1Mii RCA. It can connect two Bluetooth headphones at once, so two people can share one source.
• Best for hands-free calls → Perytong Sleep Mask. It has a built-in microphone; the 1Mii is an audio adapter, not a headset.
• Best for older wired gear → 1Mii RCA. 3.5mm AUX plus RCA in and out covers stereos, speakers, projectors, treadmills and car stereos.
• Best for a single, simple purchase → Perytong Sleep Mask. Everything you need is in the box; with the 1Mii you still supply your own Bluetooth headphones or speaker.
If I had to pick one, I'd buy the 1Mii RCA, because it makes the headphones I already own more useful in more rooms — TV, stereo, treadmill, projector — and 30 hours of playback with an actual battery readout is the kind of practical detail I want in an accessory. That said, I genuinely recommend the Perytong Sleep Mask to a different buyer: if your goal is falling asleep or relaxing in bed and on planes, the mask is the more elegant answer, since no adapter can fix the problem of earbuds pressing into your ears at night. Buy the 1Mii to connect things. Buy the Perytong to wear. Check the current price on Amazon before deciding, since these sit in very different budget brackets.
FAQ
how to connect bluetooth wireless headphones
how to pair bluetooth wireless headphones
Power the headphones on, hold the pairing button until the indicator flashes, then select them in your phone or computer's Bluetooth menu. The 1Mii RCA uses Bluetooth 5.3 and the Perytong uses Bluetooth 5.4, so both are current-generation and pair quickly with modern devices. Remember that low-latency audio on the 1Mii also requires aptX Low Latency support in your headphones.
how to bluetooth wireless headphones
If you mean making a non-Bluetooth device wireless, that's exactly what the 1Mii RCA is for: it plugs into a 3.5mm AUX or RCA jack and broadcasts to your headphones. If you mean a self-contained wireless listening setup, the Perytong Sleep Mask already has the Bluetooth built in. Pick based on whether your problem is the source or the headphones.
how to bluetooth sony wireless headphones
The process is the same as any other brand: enter pairing mode on the headphones, then pair from your phone, TV or the 1Mii RCA adapter. Sony models that support aptX Low Latency will get the best lip-sync results with the 1Mii; without that support you may notice a delay of roughly 70–200ms. For bed and travel use, a sleep mask like the Perytong sidesteps the headphone question entirely.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: SAMSON Technologies Satellite USB/iOS vs DR·AMIU 2, Hermitshell Hard Case vs WUYUEGE Clip: Air Conduction, MIDOLA Kids vs Gvyugke Gaming Headset, headphones music