This HP OfficeJet 6970 is the All in One Printer that is required to perform all the official tasks like print, copy, fax, and scan. It can connect using Ethernet or Wi-Fi or Data USB cable. It also allows the users to print on both sides of the paper. It uses 4 cartridges of color Black, Cyan, Magenta, and Yellow.
For excellent installation of the printer you have to consider the steps given at 123.hp.com/6970 mentioned below:
Initially, you have to unbox the printer.
Now dispose-off all the unnecessary materials & items.
Turn on the printer using the power cable and system also.
If you want to establish the wireless connection then you have to choose the WPS method or Manual Network selection method and if you want a wired connection then you have to plug in the USB cable to their respective ports.
Download the Drivers for the system using the site of HP or you will get a CD with the printer.
Now you have to install the downloaded application of the Driver.
Now you need to establish the connection between printer and workstation.
Steps are mentioned below for installation for the Drivers, just have a look:
Firstly, you have to go to the site of the HP, that is 123.hp.com/oj6970
Now you need to download the drivers for your printer.
After finding it, you have to download it.
After downloading it, install it properly using appropriate methods.
Now after downloading it, you have to restart the system.
After starting the system again, try to establish the connection again.
If you want to connect it using Wi-Fi then consider the steps mentioned below:
Switch on the printer.
Now I have to establish the connection using the Manual Method or WPS Button method.
After choosing the best method, you have to make a try to establish the connection.
At last, you have to take some prints after the establishment of the connection.
For the establishment of the USB connection, you have to go with the steps mentioned below:
The user should make sure to place the printer near the computer.
Initially, you have to switch on the printer.
After that, you need to plug in the data cable in both the printer and computer.
Now, wait for the connection to be established.
At last, try to have some prints.