HP OfficeJet 6968 Printer Setup and Installation-123.hp.com/oj6968
HP Officejet 6968 is the best All in One Printer available in the market. It is mainly used for fax, copy, print, and scan. It can print the documents on both sides of paper manually or automatically. It uses 4 Cartridges for printing. You can establish the connection between the printer and system using a Wi-Fi network and USB.
For setup of this printer, you need to follow the steps mentioned below:
Initially unbox the printer and place it on a flat table.
You need to separate unnecessary and necessary materials.
Take out the power cable and turn on the printer.
If you want a USB connection then take the USB data cable and plugin into both the printer and computer. But if you want a wireless connection then you need to establish the connection between the printer and computer using the Wireless or Wi-Fi connection.
Just switch on both the computer and printer.
It is now time to download the drivers for connection using the official site of the HP that is 123.hp.com/oj6968.
After installation of the Driver, users have to make a try for the proper connection between the printer and computer.
For installation and downloading the HP OfficeJet 6968 Printer are mentioned here below:
Firstly, users should visit the official site of the HP if he/she does not get the Driver CD with the printer’s package.
After going to the website, you need to find the Drivers for the Printer.
Download the desired Drivers for the printer and install them using the proper steps.
After complete installation of the Drivers, you have to start the workstation again.
Now you need to activate the printer and try to have a connection between the computer and printer.
For the proper establishment of the Wi-Fi connection between the printer and computer steps are here below, just have a look:
Initially, you have to turn on the printer.
Now you can choose two methods for connection:
WPS Button method: For this method, you have to ensure that both the printer and router support this technology. You have to press the WPS button of both the router and printer. Hold it and wait for the connection to establish. You should make sure that the printer and computer should connect to the common network and should be in the range of the Router.
Manual Network Selection method: Firstly you have to access the Control Panel on the printer. There you have to choose option settings. After that, you need to go with the Network Settings. After that, you have to select the network from the list and add the password for the establishment of the connection.
After the proper establishment of the connection, try to take some prints.
For the establishment of the USB connection, follow the steps mentioned below:
Initially, you have to switch on the printer.
Make sure to keep the printer near the system.
Take the Data Cable and put its ports to the respective slots.
After that wait for some seconds for the proper establishment of the connection.
At last, take some prints.