The touch version of CWM recovery provides a better user interface and navigation than the non-touch version, as you can use the touchscreen to select options instead of using the hardware buttons. The touch version of CWM recovery 6.0 is compatible with the following models of the Galaxy Tab 2 10.1:
P5100 (WiFi + 3G)
P5110 (WiFi)
P5113 (WiFi)
To install CWM touch recovery on your Galaxy Tab 2 10.1, you will need the following:
A Windows PC with Samsung USB drivers installed
Odin software for flashing the recovery file
The CWM touch recovery file for your device model
A USB cable to connect your tablet to your PC
A backup of your data and settings, as this process will wipe your device
Once you have everything ready, follow these steps to install CWM touch recovery on your Galaxy Tab 2 10.1:
Download the Odin software from [here] and extract it to a convenient location on your PC.
Download the CWM touch recovery file for your device model from [here]. The file will have a .tar extension. Do not extract this file.
Turn off your tablet and boot it into download mode by pressing and holding the Power and Volume Up buttons at the same time. When a yellow triangle shows up on the screen, press Volume Down to enter download mode.
Launch Odin on your PC by double-clicking the Odin3 v1.85.exe file that you extracted in step 1.
Connect your tablet to your PC using the USB cable. You should see a message "Added!" under Odin's message box in the bottom left. If not, make sure you have installed the Samsung USB drivers correctly.
In Odin, click on the PDA button and select the CWM touch recovery file that you downloaded in step 2.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin, and nothing else.
Click on the Start button in Odin to begin flashing the CWM touch recovery file on your tablet.
Wait for the process to finish. You should see a message "PASS!" in Odin when it is done.
Your tablet will reboot automatically. You can disconnect it from your PC now.
Congratulations! You have successfully installed CWM touch recovery on your Galaxy Tab 2 10.1. To access the recovery mode, turn off your tablet and press and hold the Power and Volume Up buttons at the same time until you see the CWM logo on the screen. You can use the touchscreen to navigate through the options and perform various tasks such as backup, restore, wipe, install, etc.
We hope this article was helpful for you. If you have any questions or feedback, feel free to leave a comment below.
a7a7d27f09