Ardila, N., Zambrano-Narvaez, G. and Chalaturnyk, R.J. (2019) “Wettability Measurements on 3D Printed Sandstone Analogues and Its Implications for Fluid Transport Phenomena”, Transport in Porous Media, vol. 129, 521-539.
Gomez, J.S., Chalaturnyk, R.J. and Zambrano-Narvaez, G. (2019) “Experimental Investigation of the Mechanical Behavior and Permeability of 3D Printed Sandstone Analogues Under Triaxial Conditions”, Transport in Porous Media, vol. 129, 541-557.
Deisman, N., Flottmann, T., Guo, Y., Hodder, K.J., Chalaturnyk, R.J. and Leonardi, C. (2019) “Using 3D Printed Synthetic Rock for Systematic Evaluation of Mechanical Properties in Coal”, Asian Pacific Unconventional Resources Technology Conference, November 18 – 19, Brisbane, Queensland, Australia, SPE.
Ishutov, S. (2019) “Establishing Framework for 3D Printing Porous Rock Models in Curable Resins”, Transport in Porous Media, vol. 129, 431-448.
Ishutov, S., Jobe, T.D., Zhang, S., Gonzalez, M.A., Agar, S.M., Hasiuk, F., Watson, F., Geiger, S., Mackay E. and Chalaturnyk, R. (2018) “3D printing for geoscience: fundamental research, education, and applications for the petroleum industry.” American Association of Petroleum Geologists Bulletin,” vol. 102.
Hodder, K.J. and Chalaturnyk, R.J. (2019) “Bridging Additive Manufacturing and Sand Casting: Utilizing Foundry Sand”, Addit. Manuf., 28, 649 – 660.
Hodder, K.J. and Nychka, J.A. (2018) “Silane Treatment of 3D-Printed Sandstone Models for Improved Spontaneous Imbibition of Water”, Transp. Porous Media, 129, 583-598.
Hodder, K.J., Nychka, J.A. and Chalaturnyk, R.J. (2018) “Improvement of the Unconfined Compressive Strength of 3D-Printed Model Rock via Silica Sand Functionalization using Silane Coupling Agents”, Int. J. Adh. Adhes., 85, 274 - 280.
Hodder, K.J., Nychka and Chalaturnyk, R.J. (2018) “Process Limitations of 3D Printing Model Rock,” Prog. Addit. Manuf., 3(3), 173 – 182.
Primkulov, B., Chalaturnyk, J., Chalaturnyk, R.J. and Zambrano-Narvaez, G. (2017) “3D Printed Sandstone Strength: Curing of Furfuryl Alcohol Resin-Based Sandstones”, 3D Printing and Add. Manuf., 4(3), 148-155.
Osinga, S., Zambrano-Narvaez, G. and Chalaturnyk, R.J. (2015) “Study of Geomechanical Properties of 3D Printed Sandstone Analogue”, American Rock Mechanics Association, June 28 – July 1, San Francisco, CA, USA.