Embedded Files
Goals
Finish fan intake module
Start working with acrylic for tubing
Assemble acrylic with hinge
Start completing smoke module
Test with current progress
Elijah
Fitted fan intake extension
Installed smoke tubes
Tested with smoke machine from the Autos Dept.
Printed the acrylic connecter to fit multiple sections
Redesigned elbow to curve 90 degrees (would attach to smoke module easier
Added dimples to make gluing of sections easier and more accurate
Redesigned smoke tubes b/c of leak with current printing method (halved)
Redesigned to screw-on tubes (less air leakage)
Designed tubes with narrower diameter from 4mm to 2mm i(increase pressure and clearer stream of smoke)
Screws allow us to plug up unnecessary tubes to increase pressure on other tubes
Same template as before with minor modifications
Fan intake with extension (C & T)
Fan intake with extension and smoke tubes (C & T)
Acrylic connecter piece (C & T)
IMG_5578.MOVTest with smoke machine on fan intake with extension and smoke tubes (C & T)
Redesigned tube for smoke intake (DS)
Close-up of redesigned elbow for smoke intake with dimples for alignment (DS)
Redesigned smoke rake with screw-on tubes (DS)
Redesigned tube to screw-on (DS)
Kaelan
Tested the second part if the tube with the smoke matchine
Page updated
Report abuse