Viewing Results

Once the case successfully solves, the data will be 'Published' on the main project results page. You will be able to access this summary information by clicking on the project name at the top of the left navigation panel. Clicking on the individual run will take you to the results page specifically for that run.

You would be able to view the results 2 different ways: 3D Interactive Viewer or Viewing Results and Images on Interface.

Important! While all results you see through the app (images/movies/tabular data) is stored long-term, the underlying completed simulation data may be deleted after around 6 months as the scratch storage on the supercomputer system is eventually cleaned up. What this means is that if you require custom data from a simulation you will want to let us know before or after running a simulation. We won't be able to necessarily access the data after a period of time after it has run.

Notes on Results for each App

TS Aero

VTOL Tool

Results are presented in raw forces form.

Airfoil Tool

Results are presented in Coefficient form. Lift Coefficient, Drag Coefficient, and Moment Coefficient about the quarter chord.

The Moment Coefficient is transferred to the quarter chord during post processing. If you plot or download the Moment Coefficient history from the Curves page, the moment is located at (0,0).

Free-Flight Tool

Results are presented in Coefficient form. The user provided reference chord, span, and area for the main wing are used for calculating the drag, lift coefficients.

Variables

Below is a list of variables that may be included in your results. All of the forces and moments are reported in Newtonian units.

  • Cp/pGauge: Surface Pressure magnitude
  • CpX/pX: Surface Pressure in the x-direction
  • CpY/pY: Surface Pressure in the y-direction
  • CpZ/pZ: Surface Pressure in the z-direction
  • tauw/tauwMean: Surface Shear Stress or Average Surface Shear Stress
  • Uw/UwMean: Velocity or Average Velocity
  • CpT/pTot: Total Pressure
  • U/NormalisedU: Velocity or Normalized Velocity

Note: pTot, pGauage, pX, pY, and pZ will be normalized by the freestream velocity if the input is greater than 1 m/s.

Interactive Viewer

Along with viewing the images and movies by cycling through the tabs on the results page, users will also have the option to view results through our Interactive Viewer. The results in the Interactive Viewer are exactly the same in the images/movies tab, but you are able to rotate around the vehicle as you view your results. You can read more about the Interactive Viewer here. Note: We recommend using the Interactive Viewer in Chrome browser.

Interface

Forces

In the Total Forces table, you will find the total Lift, Drag, and Side Force on your vehicle. You will also find the Roll, Pitch, and Yaw Moments calculated at the moment reference center.

Under the Individual Force Groups, you will find 3 tabs: Drag, Lift, and Side Force. This table will show the Drag, Lift, and Side Force breakdowns for each part and at each propeller if you have them.

You will also be able to view the convergence history for Lift and Drag. Clicking on the graph allows you to view the full convergence history.

Images

In the Images tab, you will find POSTPRO images for your Run. Images will be available for the different variables listed above. Geometry and Streamline plots may also be available. LIC images are images with oilflow lines for that variable.

Movies

In the Movies tab, slices can be observed for your Run. Movie Slices will be available for the following variables. LIC movies show oilflow line contours for that variable.

The slices are available in the x-, y-, and z-direction. Slices will play from negative X to positive X, negative Y to positive Y, and negative Z to positive Z.

Curves

In the Curves tab, you will find the convergence history for all the forces as well as residual plots. The Average Forces are averaged over 500 iterations.