TS Truck App Geometry

The TS Truck App has geometry pre-loaded into the app. The geometry will include: the trailer, tractor, wheels for both the trailer and tractor, and gears. An optional generic side-skirt on the trailer is also available in the app. You would have the choice to design your own side-skirt or turn on the one included. The included geometry will allow you to focus on designing aerodynamic features for CFD simulations. The features you design would need to be in the same coordinate system as the geometry files below. Your features would also need to be "attached" to the vehicle in the provided files. You do not need to upload any of the included geometry into the app.

Also do note that when inputting your design geometry (skirt panels, tail panels) they should have a thickness of >= 5 mm.

You would be able to download the included geometry from this Google Drive. The file formats available are .stl, .step, and .igs. The units for the geometry files are in meter units.

Dimensions

Dimensions of the Optional Side-Skirt

Previous: Uploading Geometry