Buying a Vienna Horn
Buying your first Vienna horn is something of a journey into the unknown for most horn players.
Assuming that you are a competent double horn player you will be equipped to try the horn out, but may be unsure of what to expect.
Outside of Austria, the Vienna horn seems shrouded in mystery. Here is some advice that should help!
Playing the Vienna horn
Moving from a double horn to a Vienna horn you should find the horn better than the F side of a double horn. The particular design of the Vienna horns benefits from good use of air, and confidence in attack. It may take a while to master this, and perhaps the advice of a good teacher. Practise driving lots of air into the horn. This will result in a good tone, and greater accuracy at all dynamics. Be prepared to use an aggressive tongue action to control the beginning and even the end of the note.
This is really important, the Austrian horn playing style is (in my opinion) related to the techniques needed to get the best out of the Austrian horns. Try thinking in terms of a switch and a power supply; where the air pressure and flow is the power supply, and the tongue and lips are the switch. The optimum power is needed for each note to function nicely. If the air is not correct for a particular note, it is impossible to compensate for this through increased lip work!
Ensure that your hand position is adjusted, so that your hand is further out of the bell than a typical double horn position; Vienna horn bells, typically, do not need much pitch adjustment from the right hand.
Whilst these factors also affect double horns, you will need to adjust a little when you switch to a Vienna horn.
Get your air right, and everything else will follow.
New Vienna horns
I would suggest consideration of Brassego, Haagston, Jungwirth, and Yamaha Vienna Horns,
and Breslmair, Romera, and Windhager Vienna horn mouthpieces.
The crook and the mouthpiece
The crook is rather like a detachable leader pipe on a double horn. Different crooks can change the character of a horn dramatically. If you are choosing a crook separately ensure that the horn and crook combination can play in tune, that the entire range is supported, and that it fits well onto the horn receiver.
The mouthpiece dimensions differ from the double horn. A deeper V cup is often used, and the back-bore is sometimes more parallel. Whilst a standard double horn mouthpiece will usually fit, the best sound seems to come from a mouthpiece designed for Vienna Horn.
Toni Romera offers a range of mouthpieces that can be ordered from his website. His vast range includes Vienna horn, double horn, and descant horn models; with a logical spread of rim sizes, rim shapes, cup depth, and bores.
If you are in Vienna, an appointment with Franz Windhager would allow you to be guided through his range of cups and rims.
The Breslmair Model Roland Berger B1, is a mouthpiece that some players use on their Vienna and Double horns.
Alois Mayer - Brassego & Haagston Vienna Horn maker
Andreas Jungwirth - Vienna Horn maker
Yamaha - Vienna Horn maker
Toni Romera - mouthpiece maker
Franz Windhager - mouthpiece maker
Breslmiair - mouthpiece maker
Occasionally used Vienna horns are seen. Rather like used cars, each horn should be judged on its own merits. Vienna horns are not mass produced, and each one can be slightly different.
Not every horn made using a Viennese wrap has the potential to be used by the Vienna Philharmonic orchestra. Some makes of horn vary from sample to sample to a significant degree; there are bad Vienna horns on the market (new and used), and a novice horn player may believe the fault is with their playing; do not make this mistake. A good Vienna horn is better than the F slide of a double horn, high register accuracy is achievable, albeit a bit scary at first. If important notes cannot be sounded, then think very carefully before buying the horn. (alternative fingering may help).
Price (a rough guide)
A top quality, new Vienna horn, will cost between €4600 and €6700 (euros).
A quality used horn in good working order will generally cost between €2000 and €4000 (euros).
Old horns in need of servicing or restoration, and collectable horns in poor condition may only cost a fraction of the above to purchase. Only after repairs will you really know if these horns can work well.