Development of an Idea

Final Model

First I took different angles of the foam model and remodeled the textures to make it smoother and clearer than the last one.

I First used to the technical pen to draw the outlines of the model thick lines for the outside and the inside is thin lines.

Then painted the model white as it had colors outstanding the background it self and to also add shadows and highlights to the textures

Last I added the light lines the see the focus of each base, neck and head

Development

I took one of the photos from the First Idea/ Final model and shaped it to the wanted following of my own

Used the side model from the first model and started to change the shape using the technical pen with the same technique. I have then annotated where I want the buttons, wiring, where I wanted my light be etc.

Final Development

Last I drew a final version of a 3D and 2D models with the measurement that I have gotten using all types of brushes like the technical pen, marker and spray paints to make for the shape, color, the my own base point of view. Last I got some Resin pictures and puting on the areas that i want to have

The glowing base

This will tell how I will have the middle part glowing in the base by first Cutting the middle piece and able to leave the LEDs inside.

Next the brown area will be the wood and the transparent glass is where the LEDs will shine out the give the effect

This is the looks on the outside and added some texture to show how it will look an the looks of glowing out.

The bottom is to show the areas the i will have screws to fix the LEDs when ever when there is a problem when it has either broken or isn't able show any light anymore.

Wiring

This is a poster about how the wire might run and as how it will work. There will be a charging wire connected to a button and the button then sends electrical signals to the head lamp and the bottom part of the glowing base. I have made a drawing of the head light and it will be slotted into the head, the other one as explained already above. Last the way we will have the wire inside the design is we will split the lamp in half and cut it through and chizled both sides to make a opening for the wire to run through

Last start adding everything together and text and you're done

FINAL DEVELOPMENT PAGE

Page updated

Report abuse