Set Comparison
First, take the wooden flats into the studio.
Be wary of lights and place them down carefully
Next, place the screws with an eye into the back of the flat about ¾ up the flat. Make sure they are screwed in tightly so it can be secure
You can use a screwdriver to help you screw in via the eye
Stand the flat back up again and position it to the area you want
When positioned, use a brace to help it stand up straight
When hooking the brace, make sure you go from the inside - out of the flat through the screw eye
Repeat on both sides
Place a weight down by the bottom of the brace where the gap is and carefully position the flat to how you want it.
Use a clamp between the edges of the flat to eliminate gaps between them
You can also screw them into each other
Repeat these steps for other flats
If wanting to create a box-like set, position one flat 90 degrees to another
Repeat steps 5-6
When adding a door/window
Repeat steps 1 - 6
When positioning, place it level to the flats to the side.
Flat Dimensions - 4 x 8 ft