Used Equipment

 
Rhin-o-Tuff HD-7000
 
 
  • Rhin-O-Tuff HD 7000
  • The HD-7000 is a 14 inch open-ended punch that features the patented "quick change" die system for changing punch patterns in 30 seconds
  • no tools required and no bolts or screws to replace or misplace.
  • The 7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions.
  • this is truly the industry standard. You need look no further for the best.
  •  
  • Punching capacity depends on the punch pattern being used. Rated at 25 to 35 sheets.
  •  
  • Machine comes with no die.
  • dies avaliable on request
  • (at additional cost).
  • sold as is running condition
 
 
Rhin-o- Tuff HD-7700
 

 

Standard Features on the HD 7700 Ultima Heavy Duty Punch Machine

  • New LED diagnostic display.
  • Patented anti-jam feature detects punch overload. Triggers auto reversing function to eliminate punch jams. Also features manual reversing as a backup.
  • Rated up to 55 sheets or 110 pages of 20 lb. bond paper. The number of sheets depends on the paper weight and punch pattern used. (15,000 to 18,000 SPH). 90 cycles per minute.
  • Punch up to 10 plastic mylar sheets regardless of hole pattern. (depending on Mylar Mil thickness)
  • Upgradeable to an automatic punch.
  • Patented QCDS quick change die system. No tools; Nothing to take apart. All punch pins easily disengage.
  • The HD 7700 has more than 20 interchangeable dies available with 12 standard hole patterns.
  • 14 in. open ended punching allows for wider applications.
  • Smooth, quiet power-on-demand operation.
  • Accu-Set paper adjustment knob for fine adjustments on odd paper sizes.
  • Use foot pedal, versa switch or palm switch
  • Extremely durable all metal construction.
  • Extra high capacity waste chip tray with new view access. No sensors needed.
  • New paper entry chute for easy paper insertion.
  • Sold As is running condition
  • Coninental U.S. only
  • NO DIE INCLUDED
  • dies avalable at an additional cost

 

Rhin-o-Tuff HD7000 & APES-14

 

 

When Attached to your HD Series
Rhin-O-Tuff Punch the APES 14:
Ejects & Stacks in One Operation.
Extends the Useful Life of your Existing Equipment.

Increases Punching Output without a Large Capital Outlay.
Increases Productivity up to 50% without the Hiring of Additional Help.
Handles paper sizes from 5½" X 5½" up to 14" X 14" (140 X 140mm to 356 X 356mm)
Punches Cover Stock and Tabs with Ease.
Can be used in Standard Mode for those Odd Jobs while still attached.
Easily installed on Existing Equipment
APES-14 attaches to HD 6500 or HD 7000.
APES-14-77 attaches to the HD 7700.

Fast and Accurate with Rhin-O-Tuff Reliability.

sold as is running condition

NO DIE INCLUDED SOLD SEPERATELY

watch video of this machine working

http://youtu.be/fI4-1hj3ulA

SOLD
 
EC-19 Stack Paper Cutter
 GUILLOTINE EC19 Electric Ream Paper Cutter. This high quality electric paper cutter will cut up to 2.1" or 500 sheets of 20lb paper. It has a 18.9 inch cut width and length, plus it comes with multiple safety features which include: Front safety cover , rear safety cover, emergency stop, two cut buttons (requires both hands to push buttons for machine to cut) and breaker switch.
- Front Safety Cover with Interlock
- Rear Safety Cover
- Two Cut Buttons for Two Handed Operation
- Breaker Switch
- Large Storage Cabinet
- Digital Display in Inches or Millimeters
- Heavy Duty Quality Steel Construction
- Built-in Handles on Sides of Cutter

SPECIFICATIONS

- Size: 41.5"H x 33.25"D x 29.0"W
- Weight.: 300 lbs
- Max. Cutting Width: 18.9"
- Max. Cutting Length: 18.9"
- Max Cutting Height: 2.1" (500 sheets of 20lb paper)
- AC 110V/60Hz - 1000W


 

 
Rhin-O-Tuff CI3000 Electric Coil Inserter
 
 
  • Patented LEXAN COIL INSERTING GUIDE
  • Lightweight And Portable
  • Natural Rubber Drive Wheel Will Not Mar Coil Finish
  • Easy Operation With Larger Coils
  • Top Guides For Book Location
  • Full Set of Coil Mandrels With Convenient Holder
  • Capable of Binding All Sizes 3/16" to 1-1/8" (5mm - 30mm) Diameter Coil
  • Crimping pliers included
  • Reversible On-Demand Motor
  • All Metal Construction
 
 
Interlake 1 1/8 Stitcher 
 
  • Speed: 191 ppm
  • Wire Size: #18 x #20 Flat High Carbon #20 x #25 Flat**
  • Capacity: 1/8" to 1 1/8"
  • MODEL S3A 1 1/8" - For consistently thick flat work ranging from 1/8" to 1 1/8".

    Features improved cut-off mechanism with carbide tip for #18 x 20#

  • (type 230) high carbon book-binders wire.

    Comes with table and gauges for flat stitching. Saddle is optional.

  •  (for use in the 1/8" to 1/4" work range only).

  •  
     
     

     

     

    Number of Drill Heads3
    Drill Sizes Available (2" capacity)1/8" to 1/2" / 3 to 13 mm
    Drill Sizes Available (2-1/2" capacity)1/4" to 1/2" / 6 to 13 mm
    Range Between Drills2-3/4" to 4-1/2" / 7 - 11 cm
    Range Between Outside Drills5-1/2" to 9" / 14 - 23 cm
    Maximum Drilling Capacity2-1/2" / 63 mm
    Strokes per Minute (adjustable)Up to 18
    Backgauge Adjustment0 to 4-1/2" / 0 to 11 cm
    Vertical Adjustment of Individual Heads1/4" / 6 mm
    DIMENSIONS
    Table Size19-1/2" x 31-1/2" / 50 x 80 cm
    Table Height37" / 94 cm
    Overall Height59-1/4" / 151 cm
    Floor Space Needed36" x 41-1/2" / 91 x 105 cm
    Net Weight (approximate)520 lbs / 236 kg
    Shipping Weight (approximate)570 lbs / 259 kg
    ELECTRICAL

    1 Phase, 60 Hz, AC. Pump: 1/2 HP. Spindle Motor: 1 HP.
    208 Volts, 18 Amps (service size 30 Amps) or
    230 Volts, 17 Amps (service size 30 Amps)
    UL Listed

     
     
     
    Model 20 Paper Cutter 
     
     
     SOLD

    Cutting Dimensions

    Cutting Width 20” (50.8 cm)

    Minimum Cut* ½” (13 mm)

    Clamp Opening 3¼” (8.3 cm)

    Table Space

    Front: 16” (41 cm)

    Back: 20” (51 cm)

    Machine Dimensions

    Table Height 35” (89 cm)

    Overall Height 47-1/2” (121 cm)

    Overall Length 48-1/4” (123 cm)

    Overall Width 35-1/2” (90 cm)

    Net Weight (Approximate) 550 lbs (250 kg)

    Shipping Weight (Approximate) 650 lbs (295 kg)

    Electrical

    Standard - 120 Volts (±10%)/12 Amps, 1 Phase, 60 Hz, AC. Service size 15 Amps

     
     

    posted Apr 15, 2012, 5:24 AM by Mark Moskowitz   [ updated Jun 2, 2012, 4:36 PM ]

    1-1 of 1