MODEL S3A 7/8"
The two (2) sheet to 7/8" capacity stitcher
The ISP S3A 7/8" performs like three stitchers in one. It's
furnished with three sets of formers and drivers:a set for #25 round wire (2 sheets to 1/4")
a set for #20 x #25 flat wire (1/4" to 1/2")* a set for 19 x 21 1/2 flat wire (1/2" to 7/8")
As a result, the most particular customer will be pleased with perfect stitching on any job
 from two sheets to 7/8". The unit comes with saddle, flat table and gauges for flat and saddle stitching.
* Shipped with these parts installed.
MODEL S3A 1 1/8" -
 For consistently thick flat work ranging from
1/8" to 1 1/8".

Features improved cut-off mechanism with carbide tip for #18
x 20# (type 230) high carbon book-binders wire.
Comes with table and gauges for flat stitching. Saddle is
optional. (for use in the 1/8" to 1/4" work range only).



MODEL N3B2 - 1/2R -
Handles big jobs from 1/2" to a maximum of 1 3/4" thick.

The ISP Model N3B2-1/2R will flat stitch work from a minimum
thickness of 1/2" to 1 3/4" maximum depending upon type of paper used.
 Stitcher is set to use #17 round bookbinders wire.

MODEL N3B2-1/2H - Our largest capacity stitcher.
Will flat stitch work from a minimum thickness of 1/2" to 2"
maximum, depending upon type of paper used. Equipped with heavy-duty cutter
block for #18 x #20 (type 230) high carbon wire. A maximum of 2 3/4" of work
can be done by stabbing.


M2 Stitcher
Capacity: from 2 sheets to 5/16" with a G8 Head from 2 sheets to 1/4" with a 26D

Wire Sizes: 21-25 round or 21x25 flat

Clinch: moveable clincher for flat stitching

Table: 26" wide heavy duty,
14" throat for flat and saddle work

Speed: 215 stitches per minute