printer


Canon BJC series 1000sp,2100sp the problem Absorber full
If your printer is having problems , such as absorber full .
its characteristic features
printer in a state of line , cut no movement in the printhead
and information from the help of a computer , that the printer absorber full .

solution
to overcome this problem , it is easy .
using the formula of time , 2 seconds , 5 seconds , repeated 3 times .

guidance

1 . position the voltage source is mounted .
2 . press the reset button for 2 seconds , release the button
3 . press the reset button for 5 seconds , release the button
4 . press the reset button for 2 seconds , release the button
5 . press the reset button for 5 seconds , release the button
3 . press the reset button for 2 seconds , release the button
4 . press the reset button for 5 seconds , release the button .

If after doing the above procedure printer responds by doing printhead movement , 
then the repair process to the problem of absorber full , successful .

and just off the voltage source , and plug it in again .

then you are ready for the printer in use .

good luck

Google NewsShow (Leaderboard)


ċ
Pemasangan jaringan Sharing Internet dengan menggunakan system Windows XP Profesional.zip
(23k)
Gede Arthana,
10 Sep 2013 20.08
ą
Gede Arthana,
10 Sep 2013 19.59
Comments