Quite often I am asked "How can you copy CW at 70 wpm and higher?" Since it's pretty insulting just to answer by  saying "Practice, practice, practice", I normally wind up emailing back a synopsis on how I learned to do it. Others have used different methods of achieving QRQ copy by ear.

What I have to say on this subject is only my own personal opinion, which normally does not agree with everyone else!

I really don't believe in the various methods of learning code. I think learning to copy high speed code is much simpler than following someone else's method of learning to copy QRQ. What I am sharing with you is things that I found to work for me.

There are some basic's I think one MUST learn, and the very first one is you must learn to copy ONLY in your head. That's very important! From there you can begin to increase your copy speed. So copying in your head is a MUST. Jotting down notes or 'key words' is fine to remind you of something you want to respond to during your QSO.

QSO'ing at 70 to 120 wpm is literally no different than having a conversation on the telephone; you are  just doing it using a different language! No sending call signs (except as required) and no sending 'bk'. You don't do that on the telephone! Speaking on a telephone is operating duplex, therefore why not do the same thing on CW?

A second most important thing you must do is have a radio that has excellent full QSK at high speeds.  Simply because when operating QRQ, you MUST do it in duplex! You don't stop and take notes when your conversing on the telephone, so why do it when your operating QRQ? The radios that I know of that can run full QSK at speeds over 100 wpm are the Ten Tec Corsair II and the Icom IC-781, and they do it flawless. In my opinion, full QSK is not at what speed you can hear another signal between dots, but at what speed can you hear your fellow ham trying to break you! Hearing between dots is a fine criterion for speeds below about 40 wpm, but is inconsequential over 60 wpm. Unfortunately the more digital circuitry that is added to modern transceivers, the less high speed QRQ capable they become.

All high speed code (above about 55 wpm) is sent with a keyboard/keyer or a computer keyboard, simply because one just cannot consistantly send 'clean' code by hand on a key. Consistently 'clean' code makes for easier copying! I've been a CW operator for over 55 years but I am not one of those 'old goats' who claim that sending CW by any other means than using your had is not 'real' CW. 'Real' CW is a dot and  a dash, no matter how you send it. The idea here is how you copy QRQ, not how you send it!

Most computer programs that are capable of generating CW are, for some reason, not designed to exceed about 99 wpm. And most computer programs generate CW either via a serial port or a parallel port. Using these I/O ports causes an inherent problem for smooth CW generation. A computers CPU produces random (to us) interrupts which almost always stops activity in any I/O port FIRST! This leads to a 'stutter' sound in generated CW coming from these I/O ports. VE6YP, who is the author of the program I've been using for close to 10 years, is the only program author I know of who has found a solution to this problem. In his program, YPlog, he generates CW via the computer sound card, which is never interrupted by a computers CPU 'house-keeping'. The user builds a very simple audio detector and transistor switch to key his radio. This system works very good to over 160 wpm.

The reason you first want to learn to copy in your head only is because when you get to speeds around 50 to 55 wpm, you have to teach your brain literally to change it's method of interpreting code.(And it takes a while to do this!) Below about 50 wpm, you are still hearing a dot and a dash to form a word. When you are copying at 60 wpm and higher, you do not consciously hear a dot and a dash, you literally hear a word. At that time too, you begin to have to be in, what I call, the 'flow of the conversation', just like you are when your talking on your telephone. If you send me code groups at 70 wpm, I could not copy most of them, but if you and I are in a converation at 70 wpm or higher, THEN I can copy pretty solid.

To increase your copy speed, I recommend a code reader...and don't be shocked by that! The reason I recommend a code reader is because the process of learning to copy from about 50 to 60 wpm is where you literally have to teach your brain to copy code in a different way. The problem at these speeds is if you miss a word, your brain automatically freezes and tries to 'guess' at what that one missed word is. While the brain is trying to decide what that one word is, many more words go flying by, and you actually get very confused and lose track of what is being sent to you. When you start using a code reader, a first you're going to just read the screen, but subconsciously the brain is associating the dots and dashes with what your reading on the screen. The more you do this, you will find that the less you read the screen, but only glance at it when you miss that one word! This gets you over that 'brain freeze' that is caused by missig just one word! Once you get to copying around 60 wpm, when you DO miss that one word, your brain realizes it, but then just continues to copy, ignoring or filling in that one missed word.

Don't worry about a code reader being a crutch, simply because when you get to where you can copy around 60 wpm, you will find that you can then copy code better than a code reader! A code reader is not very good at handling high speed code in the presence of normal band noise of your receiver. About 60 to 70 wpm and they are not capable to keep up anymore because of noise crashes, but your brain can easily filter out the noise. A code reader is an 'aid' to helping one learn to copy code faster, it is NOT a crutch!

[[just for info: Although you will not be conscience of copying dots ad dashes, if the sender mis-spells a word, somehow your brain will notice that. Say the sender sends the word 'will' as w'E'll, your mind will notice that one dit that was missed, but you will have trained your brain to ignore that one missed dit, and it will continue copying. I'm not truely sure of this but I think somewhere above about 70 or 80 wpm, since your mind is now really in the 'flow of the conversation', you probably are not literally copying every word that is sent to you, but your brain is copying enough to make sense out of what is being said!]]

Two big things about QRQ: 1) You HAVE to make it just another FUN thing you want to do with your hobby. 2) You are not going to learn to do it over night! But anybody can learn to do it.

I got started doing QRQ sometime in the late 60's when I heard two hams talking to each other on their regular skeds on 40m, at 100 wpm. I thought it was just very fascinating, and just decided that was something I WANTED to do. And it took me about a year to go from 30 wpm on my keyer to over 60 wpm. That includes the time it took me to change from a QWERTY keyboard to a Dvorak style keyboard. The neat and fun thing I found, is that once you get to where you can copy between 60 and 70 wpm, your mind seems to just open up to copying QRQ. Going from 60 wpm to say, 100 wpm, seemed to be a breeze compared to retraining my brain to get through the 50 to 60 wpm 'brick wall' we all have to go through.

I really don't know how fast I could copy, but I used to have QSO's with KB9XE and NU2C at about 120 wpm and could fully understand what they were saying. NU2C tested me once and he would send me two questions, which I had to answer both, then he would go up about 5 wpm . Finally at 145 wpm, I got only one of his questions! I have read that recently a German ham did copy a call sign being sent my RUFZ (a high speed competition program) at 200 wpm! Copying CW at high speeds, either 145 wpm or 200 wpm, is one thing, having a conversation at those speeds is something quite different.

Again, two things. You have to make this a fun-thing, you have to want to do it, and it can get pretty frustrating at times. You have to be willing to spend the necessary time on the air working at improving your copy. That is the only way I know of that you can do it, as there are no short cuts. Interestingly, of the maybe 10 hams that I know that operate at high speeds, none of the have any interest in records or reconition for their QRQ ability. They all simply do it for the enjoyment of it.

 

 Lyle/W9FCX and Tom/W4BQF both sending QRQ using the same radio to Ted/K5LGJ, trying to fool him! It worked!

 

 

 

Lyle/W9FCX and Bill/KB9XE

Bill has the worst typing posture one could imagine, but he is one of the smoothest QRQ operators I've ever heard.

Lyle, who will be 84 years old for the 3rd time this Feb 2008, is a story within himself, but he sure does enjoy QRQ.

 

 

Ted/K5LGJ at age 87 still claims he can not copy 80 wpm but he sure can answer any quistions you send him at that speed.

 

These photos represent only a few of the active QRQ hams that I know. There is no insinuation here that you must be over 60 years old to do QRQ. I have helped a ham who was 14 years old learn to copy faster, but I think his Mother or Dad made him put his nose back into his school books! I don't believe age has anything to do with copying QRQ.

 

 

        Dvorak Keyboard