PTU Tutorials‎ > ‎


Supplies Needed:

 -I am using PSPX2

 -General Knowledge of PSP

 -PTU Scrapkit Roller Princess by Designs by Sarah which you can purchase here.

 -PTU Pinup Art Marc Duval which you can purchase here.

 -Template #27 by me which you can download here.

 -Filters dsb flux and xero flittary.

 -Font of choice

Let's Get Started:

 (I do not and will not give you every single detail of this tag, 
if you are experienced in tagging you already know the tricks, but
I don't like exact copies, and neither should you. You are creative! 
Please add your flair to this tutorial, similiarity is just fine).

 Open template, Delete copyright layer.
 Also can use tip 2 to add frames to the layers, which I have 
done to some.
 I also just changed some colors to the layers to match the kit/pinup.
 When I do that I just had a flux or flittary to the layer. 

 Add your pinup.


Add papers of choice, from the kit, to the layers by using
tip 1 (this can be found to your left under tips and tricks)


This are elements I used from the kit, please resize and add
drop shadows as desired. 

string2: paste on the upper right under the pinup but on top of
all layers.

string1: paste on the bottom right under the pinup but on top of 
all layers, except wordart.

ribbon3: on top of string1.

print: paste under the layer "circle".

sparkle: paste under wordart but on top of pinup.

beads: paste under all strings and ribbons and kind of "scoot" to 
the right.

bubbles: paste twice under pinup.

dots: paste in the same area as the other strings and ribbons.

hearts: resize and paste in the lower right corner. Paste again, 
mirron and place in the lower left corner.

bow2: resize and place in the upper left of the tag.

lolli2: resize and paste under the hearts on the left of the tag.

free rotate the lolli at 7 degrees left.

tiara: resize and place besides the wordart on the right side.

circles: paste under everything about, paste a paper behind the
circles and delete excess. Add the face of your pinup ito the circles
and change your layer properties for effect.

buttons1&2: take them, resize them and place in random places on
the tag.

now add a mask of choice for the back.


 Use font of choice to add name of choice to the tag.


Please use proper licensing information with your tag

Enjoy Your New Tag: