If you don't want use SRAM Expansion you don't have to solder this 2 capacitors.
Here we do the same on the TOP face around the SRAM Place.
And we start with all the little 100nF capacitors on the bottom faces around the SDRAM Chip place.
We prepare the needed components ...
Now we are ready for start.
Everything is looking fine after a little inspection.
Here is the new v2.0 expansion board
I finally get my PCB from seedstudio and started to put everything together ;)
Not bad , we are finish soon ...
That's it :)
It have take me a little more than 1 hours for do it , and it worked at first time :)