Assistant Professor,
Department of Mechanical Engineering,
Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat - 395007.
Phone No.: +91-0261-2201936
(M) +91-9723455853
E-mail: s.pandya@med.svnit.ac.in
Embedded Files
Research:
Research:
RESEARCH INTERESTS:
(A) Manufacturing and Materials:
Structure-property correlationship of materials
Hybrid manufacturing processes
Additive manufacturing of metals,
Welding of dissimilar metals,
Friction stir welding and processing,
Manufacturing of metal matrix composites,
Metal casting,
Modeling of heat transfer in manufacturing processes.
Post weld mechanical testing and corrosion engineering
(B) Design Dynamics & Automation:
Friction and wear Behaviour of materials,
Tribology in Manufacturing,
Design of Tools & Equipment for manufacturing,
Bio-tribology, Biomechanics & Bio-robotics,
SPONSORED RESEARCH PROJECT: 01 (ONGOING) as CO-PI
PROJECT TITLE: Strengthening, Modernization and up gradation of the existing laboratory facilities to develop state of the art advance welding research centre for promoting the indigenous industry-academia R & D activities.
COST OF PROJECT: 200 LAKH (Rs. 2 CRORE).
SPONSORING AGENCY: Industries Commissionerate, Govt. of Gujarat.
Time Period: Five Years.
PH.D. SUPERVISED: 01 COMPLETED +01 ONGOING
(1) RANGREJ SHAYM S.
YEARS: 2019 TO 2024
THESIS TITLE: Experimental investigations on Microstructural, Mechanical and Sliding Wear Behaviour of Stir Cast A713-TiB2 Composites and A713-TiB2-Graphene Hybrid Composites.
(2) MORASIYA CHINTAN V.
YEARS: 2020 TO ongoing till date
THESIS TOPIC: Stir casting of metal matrix composites.
RESEARCH PUBLICATIONS:
JOURNAL PUBLICATIONS
1.S.N.Pandya, Dr.S. K. Nath & G.P.Chaudhari ; "Friction and Wear Characteristics of TIG Processed Surface Modified Grey Cast Iron";Journal of Scientific Research ; Vol. 1(3) ; 516-527 ; Rajshahi University, Bangladesh; 2009.
2.S. N. Pandya & A. S. Vagh; “Influence of Process Parameters on the Mechanical Properties of Friction Stir Welded AA2014-T6 Alloy using Taguchi Orthogonal Array”; International Journal of Engineering Sciences & Emerging Technologies; Vol. 2(1); 51-58; 2012.
3. Shailesh N. Pandya, Jyoti Menghani “Developments of mathematical models for prediction of tensile properties of dissimilar AA6061-T6 to Cu welds prepared by friction stir welding process using Zn interlayer”, Sādhanā, 43 (10), 168, 2018.
4. Shailesh N. Pandya, Jyoti Menghani; “A preliminary investigation on microstructure and mechanical properties of dissimilar Al to Cu friction stir welds prepared using silver interlayer”, Metallurgical and Materials Engineering, 24 (1), 2018.
5. Shailesh N. Pandya, Jyoti Menghani; “A parametric investigation on effects of friction stir welding process parameters on mechanical properties of AA6061-T6 to Cu dissimilar joints.” International Journal of Engineering and Materials Sciences (IJEMS), 25(2), 2018.
6. Shyam Rangrej, Jyoti Menghani, Shaileshkumar Pandya; “Effects of TiB2 reinforcement proportion on structure and properties of stir cast A713 composites”, Canadian Metallurgical Quartely, 62(4), 678-689, 2023.
7. Chintan Morasiya, Shaileshkumar Pandya; “Effect of stir casting process parameters and stirrer blade geometry on mechanical properties of Al MMCs – A review” Archives of Metallurgy and Materials, 1473-1495, 2023.
8. Shyam Rangrej, Jyoti Menghani, Shaileshkumar Pandya; “Investigation on the microstructure, microhardness and tensile strength of stir casted A713-TiB2 Composites.”, Archives of Metallurgy and Materials, Vol.69(3), Page No.1251-1260, 2024.
9. Shyam Rangrej, Jyoti Menghani, Shaileshkumar Pandya; “Investigation on microstructure characterization & Mechanical properties of stir-cast A713-TiB2-Graphene hybrid composites”, Metal Science and Heat Treatment, Metal Science and Heat Treatment 66 (3), 243-251, 2024.
PUBLICATIONS IN CONFERENCE PROCEEDINGS
1. S. N. Pandya, S. D. Patel, T. Venkataramana,; "Forging Characteristics of 20MnMoNi55 steel" ;4th International Conference on Advances in Mechanical ngineering(ICAME); 492-496 ; S. V. National Institute of Technology, Surat ; 2010.
2. S. N. Pandya, J. V. Menghani; ‘Friction Stir Welding of Dissimilar 5xxx to 6xxx Al Alloys: A Review’’, Applied Mechanics and Materials, 2013
3. S. N. Pandya, S K Patel; “Effects of Tool Shoulder diameter & Tool Travel Speed on Mechanical Properties of AA5383-H16 Welds produced by FSW Process”, International Conference on Advances in Mechanical Engineering (ICAME – 2013), Dept. of Mech. Engg., College of Engineering Pune, Pune, 2013.
4. Akash Pisharody, Jyoti Menghani, Shailesh N Pandya; “An Experimental Investigation of Friction Stir Welding of Dissimilar Aluminium and Steel Sheets”, Proceedings of International Conference on Advances in Materials and Product Design (AMPD 2015), 2015,
5 Kamlesh Meena, Aditya Kumar, Shailesh N. Pandya; “Optimization of Friction Stir Processing Parameters for 60/40 Brass using Taguchi Method” 5th International Conference on Materials Processing and Characterization (5th ICMPC), Hyderabad, 12-13 March, 2016.
6. Shailesh N. Pandya, Jyoti Menghani; “Optimum Heat Source Position Offset in Welding of Dissimilar Al-Cu Metals Using a Theoretical Approach”, International Conference on Advances in Materials and Manufacturing (ICAMM-2016), Hyderabad, 8 -10 December, 2016.
7. Shailesh N Pandya, Jyoti V. Menghani; “Formation of Intermetallics during Friction Stir Welidng of Dissimilar Al to Cu Welds: A Review”, 6th International & 27th All India Manufactuirng Technology, Design and Research Conference (AIMTDR – 2016), 16-18 December, 2016.
8. Shaileshkumar N. Pandya, Jyoti V. Menghani; “A preliminary experiment on effect of filler powder addition in friction stir welding of dissimilar AA6082-O to pure Cu sheets, 2nd International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA18), Singapore, 24-26 Ferbruary, 2018.
9. Deshant Sharma, Rahul Borhade, Bishnu Sanghai, Shailesh N. Pandya, Kapil Baidya, Raja Munusamy; ‘Lithium-Ion Cell’s Shape Factor Implication on Cell Perfromance in Automotive Application’, Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC – 2019), December 28-31, 2019, IIT Roorkee, Roorkee.
10. Shyam Rangrej, Shaileshkumar Pandya, Jyoti Menghani; “Effects of reinforcement additions on properties of aluminium matrix composites – A review”, Materials Today: Proceedings, Vol. 44, Page 637-641, International conference on Materials, Processing & Characterization – 2021, Hyderabad (ICMPC-2021).
11. Jyoti Menghani, Yogesh Chaudhary, Shailesh Pandya; “Effects of reinforcement on microstructure and mechanical properties of aluminium hybrid composites”, Materials Today Proceedings, Vol.62, Page 5653-5659, 2022, International Conference on Emerging Trends in Material Science and Technology.
12. Mukul kumar , Shaileshkumar Pandya, "A 2-D parabolic heat source for modelling of Tungsten Inert Gas (TIG) welding process", National Conference on Advanced and Emerging Materials for Technological Applications (AEMTA- 2024), 15-16 March, 2024 SLIET, LONGOWAL, Punjab, India.
13. Shyam Rangrej, Shaileshkumar Pandya, Jyoti Menghani, "Comparative evaluation of microstructure & mechanical properties of stir-cast A713/TiB2 & A713/TiB2/Graphene hybrid composites", 3rd International Conference on Materials Science and Engineering, 23-25 November, 2023, NIT Jalandhar, Jalandhar, Punjab, India.
14. Rohitkumar Sharma and Shaileshkumar Pandya, “Effect of Precipitation Hardening Heat-treatment on Slurry Pot Erosion Wear of AA6061-8%SiC Metal Matrix Composites” International Conference on Tribo-Corrosion (ICTC-2024), December 10-11, 2024, Department of Mechanical Engineering (DoME), Indian Institute of Technology, Delhi (IIT Delhi).
15. Shyam Rangrej, Shaileshkumar Pandya, Jyoti Menghani, Vishvesh Badheka, Krunal Mehta; “Investigation on the microstructure, microhardness and wear behavior of A713-Tib2 composites”, 6th International Conference on Recent Advancements in Mechanical Engineering (6th ICRAME), National Institute of Technology(NIT) Silchar, Assam, 28th February – 2nd March, 2025.
BOOK CHAPTERS:
C V Morsiya, S N Pandya; Recent advancements in hybrid investment casting process—a review, Recent Advances in Manufacturing Processes and Systems: Select Proceedings, 2022.
M. TECH. DISSERTATIONS SUPERVISED: 30
1.Forging characteristics of 20MnMoNi55 Steel, PATEL SACHIN P., (P08IP715), M. Tech. (IPED), 2010.
2.Experimental and Analytical Investigation on friction stir welding process, ANKUR SHIVAJIRAV VAGH, (P09IP726), M.TECH. (IPED), 2011.
3.An experimental and analytical investigation on resistance spot welding process, RATHOD KANUBHAI SHAMALBHAI(P10ME132). M. TECH. (MECHANICAL), 2012.
4.Experimental investigation on mechanical properties of Aluminum alloy welds made by friction stir welding process, SHAILESH K. PATEL (P10ME118), M. TECH. (MECHANICAL), 2012.
5.Experimental investigation on mechanical properties of weldment produced by friction stir welding process for dissimilar work materials, PIYUSH HARJIBHAI
VASAVA (P10IP121), M.TECH. (IPED). 2012.
6. An experimental investigation on rotary friction welding, DIVYEN N. PATEL (P11ME020), M.TECH. (MECHANICAL), 2013.
7. An experimental investigation on friction stir welding of copper alloy. SANDEEP KUMAR (P11ME046), M.TECH. (MECHANICAL), 2013.
8. Characterization of Aluminium based metal matrix composites by stir casting techniques, YOGESH S. CHAUDHARI (P11ME040) M.TECH. (MECHANICAL). 2013.
9 .An experimental investigation of friction stir welding of dissimilar Aluminium and steel sheets, PISHARODY AKASH P. (P11ME008). M.TECH. (MECHANICAL), 2013.
10. Joining of dissimilar alloys by friction stir welding, DHAVALKUMAR SANMUKHBHAI CHAUDHARI (P12IP018). M.TECH. (MECHANICAL), 2014
11. Experimental investigation on friction stir welding of polymeric material. SANDEEP K LAD (P13MF016) M. TECH. (MANUFACTURING), 2015.
12. Microstructure and Mechanical Properties of Al alloys Lap Joints by Friction stir welding. AJAY TRIVEDI (P13MF008) M. TECH. (MANUFACTURING), 2015.
13. An experimental investigation on friction stir weld bonding of polymeric methacrylate(PMMA). GAMIT HARDIKKUMAR GULINGBHAI (P15MF018) M. TECH. (MANUFACTURING), 2017.
14. Experimental investigation on friction stir processing of Aluminium Alloy 6061. FULARI NIKHIL SHRIKANT (P15MF007), M. TECH. (MANUFACTURING), 2017.
15. Analytical modelling of friction stir welding of Aluminium alloys PATIL RHISHIKESH RAMRAO (P16ME001), M.TECH. (MECHANICAL), 2018.
16. Numerical modelling of heat transfer during solidification of casting PRAKALP ROHIT SHAH (P17ME004). M.TECH. (MECHANICAL), 2019.
17. Thermo-electric modelling of Li-ion battery for X-electric vehicles. DESHANT SHARMA (P17ME002). M.TECH. (MECHANICAL), 2019.
18. Analytical modelling for the prediction of grain size of friction stir processed AZ31 Mg alloy. AKHIL SREEKUMAR (P17ME001) M.TECH. (MECHANICAL), 2020.
19. Analytical modeling for solid particle erosion wear of steel. PARTH J. MANGUKIYA (P17ME008) M.TECH.(MECHANICAL), 2020
20. Selection of Welding Process for Hard Facing on Carbon Steels Based on Quantitative and Qualitative Factors. SHAILENDRA KUMAR SHUKLA (P18ME003) M.TECH. (MECHANICAL), 2020.
21. Design and Thermal Analysis of a stir casting furnace for fabrication of Al-Metal Matrix composites. CHINMAY DHADUK (P18ME004) M.TECH. (MECHANICAL),2020.
22. Simulation of mechanical properties of Aluminium composites manufactured by stir casting process. DEEPAK CHANDAK (P18ME008) M.TECH.(MECHANICAL), 2020.
23. Thermal modelling of wire arc additive manufacturing. ABHINAV JAIN (P19ME001) M.TECH. (MECHANICAL), 2021.
24. Design and Thermal Analysis of a stir casting furnace for fabrication of Al – Metal Matrix composites. ADARSH KUMAR YADAV (P19ME004) M.TECH. (MECHANICAL), 2021.
25. Tribological Characterisation of Metal Matrix Composites Made By Stir Casting Process from AA6061 Extrusion. SOHIL PARMAR (P20ME007) M.TECH.
(MECHANICAL), 2022.
26. Design And Analysis Of A Novel Mechanical Solar Tracker For Thermoforming Application. PREM MUNDHAVA (P20ME008), M.TECH. (MECHANICAL), 2022.
27. Failure Investigation of Power Plant Components. RAHUL CHAUHAN (P20MF009), M. TECH. (MANUFACTURING), 2022.
28. Thermal Modelling of Tungsten Inert Gas (TIG) Welding. MUKULKUMAR (P19ME016), M. TECH.(MECHANICAL), 2022.
29. Dissimilar welding of Aluminium 6061 T6 to J4 stainless steel in lap configuration by gas metal arc welding. UDAYBHAI HASMUKHBHAI PATEL (P23ME011), M. TECH. (MECHANICAL), 2025.
30. Investigation of corrosion behaviour in Colmonoy 6 cladded AISI 304 stainless steel using Plasma Transferred Arc Welding. AMIT KUMAR DAS (P23ME007), M.Tech.(MECHANICAL), 2025.
B. TECH. PROJECT SUPERVISED: MORE THAN 20.
REVIEWER OF INTERNATIONAL JOURNALS:
Results in Engineering (Elsevier)
The International Journal of Advanced Manufacturing Technology (Springer)
Book Reviewer (Cambridge University Press)
Advances in Materials and Processing Technologies (Taylor and Francis Group)
International Journal of Materials Engineering Innovation (Inderscience Journals)
Multiscale and Multidisciplinary Modeling, Experiments and Design (Springer Nature)
Academic Record:
Academic Record:
Ph.D. in Mechanical Engineering (SVNIT-Surat) in Year 2019.
M. Tech. in Metallurgical Engineering with specialization in Industrial Metallurgy (IIT Roorkee) in Year 2005.
Qualified in GATE 2003 with 98.42 percentile (All India Rank 403 out of 26241 candidates in Mechanical Engineering paper).
B.E. in Mechanical Engineering from S. S. Engg. College, Bhavnagar, Gujarat in Year 2001.
Experience:
Experience:
Assistant Professor (Level 12) Department of Mechanical Engineering, SVNIT, Surat; since Sept. 2019 to till date.
Assistant Professor (Level 10) Department of Mechanical Engineering, SVNIT, Surat from March 2009 to Sept. 2019.
Lecturer, Mech. Engg. Dept., Institute of Technology, Nirma University, Ahmedabad from August 2005 to March 2009.
LABORATORIES:
LABORATORIES:
Sophisticated Innstrumentation Centre
High Speed Camera
Scanning Electron Microscope (SEM)
Gas Chromatograph
Bomb Calorimeter
Portable Alloy Analyzer
Portable Flue Gas Analyzer
Ultimate Analyzer
Metallurgy Laboratory
Ultrasonic Vibration Assisted Stir Casting Furnace
Universal Testing Machine
Slurry Jet Erosion Test Rig
Cavitation Erosion Test Rig
Muffle Furnace
Metallurgical Microscope
Phased Array with Time of Flight of Diffraction
Teaching:
Teaching:
Courses Teaching (Present)
UG
1.THEORY OF MACHINES 2.BIOMECHANICS
3.DYNAMICS OF MACHINES
PG
1.ADVANCED WELDING TECHNOLOGY
COURSES TAUGHT (Past):
UG
1.BASIC MECHANICAL SYSTEMS 2.MATERIALS SCIENCE & METALLURGY
3. MANUFACTURING TECHNOLOGY 4. METALLURGY
5.QUANTITATIVE TECHNIQUES IN PRODUCTION MANAGEMENT 6. WELDING TECHNOLOGY
7. AUTOMOBILE ENGINEERING 8. PLASTICS AND CERAMICS
9. CORROSION ENGINEERING 10.MATERIALS MANAGEMENT
11.FUNDAMENTALS OF THERMAL AND FLUIDS ENGINEERING 12. ADVANCED MACHINING METHODS (AT NIRMA UNIVERSITY)
13. MATERIAL TECHNOLOGY (AT NIRMA UNIVERSITY) 14. MANUFACTURING PROCESSES - I (AT NIRMA UNIVERSITY)
15. WORKSHOP PRACTICE
PG
1.METAL CASTING AND JOINING PROCESSES 2. METAL CUTTING AND TOOL DESIGN
3.THEORY OF METAL CUTTING 4. MANUFACTURING AUTOMATION (AT NIRMA UNIVERSITY)
Administrative Duties & Responsibilities:
Administrative Duties & Responsibilities:
(A) Departmental Level:
Member, Committee for activities related to M. Tech. for Working professionals (Mechanical Engineering) (20/11/2025 to till date)
Member, Committee for B. Tech. IVthe year (VIII semester) Internship (08/09/2025 to till date)
Lab-incharge, Metallurgy Laboratory (2009 to till date)
Lab-incharge, Sophisticated Instrumentation Centre (SIC) (October 2019 to till date)
Lab-incharge, Advanced Welding (2019 to till date)
Coordinator, CPPP portal at departmental level (06/02/2023 to till date)
Member, M. Tech. curriculum revision committee (Manufacturing Engg.) - May-2021
Member, Scrutiny Committee for Special Recruitment Drive for the post of Assistant Professor (Grade–II) - July 2021
Member, Departmental Purchase Committee (06/02/2023 to 11/03/2025)
Coordinator, Annual report, website (30/04/2019 to 05/03/2021)
Coordinator, Annual Report, Website, MIS (24/08/2012 to 19/12/2014)
Coordinator, Expert Lectures (24/08/2012 to 19/12/2014)
Coordinators, Stock Verification, Write off items (24/08/2012 to 19/12/2014)
Lab-incharge, Simulation Laboratory (05/02/2016 to 30/04/2019)05/02/2016
Coordinator for all matters related to Deputation of students/Teaching scheme /subject related matter (19/12/2014 to 31/12/2016)
Coordinators, matter related to Formatting/Model question papers and moderation (19/12/2014 to 31/12/2016)
Coordinator, B. Tech. Project and Seminar Examination (June 2012 to April 2019)
Member, Committee for Evaluation of Teaching Demo for recruitment of Assistant Professors Grade I and Grade II - Sept.2023.
(B) Institute Level:
Mentor, Capacity Building for Design Entrepreneurship (CBDE) (2025-2026)
Co-Chairman, Indian Institute of Welding (IIW) (SVNIT Surat student chapter (09/10/21 to till date)
Member-Secretary, Committee to finalize the rate contract for hiring the Mandap, Lights, Sound System (04/05/2023 to till date)
Faculty Advisor, A group of students 2020-21(Admin II) (01/08/2020 to 31/07/2021)
Member, document verification committee, recruitment of Junior Assistant. (No.E/NT-Rectt/09 dated 05/04/2023)
Member, scrutiny committee for Group A, B & C recruitment (Admin II).(23/12/2022 to Jnauary 2023)
Member, scrutiny committee for the post of Assistant Registrar (Admin II) (17/04/2023 to June 2023)
Faculty Mentor, B. Tech. 1st year students of group of 10 students (U23ME051 to U23ME060)(No.Acad/477 Dated 18/09/2023) 18/09/2023 to 30/06/2024
Member, Stock Verification Committee for the year 2022-23.(No.E/141/998 form 20/07/2023 to15/08/2023)
Member, SUB COMMITTEE 8 FOR UG (Mechanical) of REGISTRATION committee for 20th Convocation. (17/01/2024 to 12/02/2024)
Member, Scrutiny committee for applications of Assistant Professors, Grade I & II (Recruitment – 2023) in May -2023.
Member, Scrutiny committee for upgradation of the internal faculty members from Pay Level 10 to Pay Level 11. (Recruitment – 2023)
Member, document verification committee, Recruitment of Assistant Professors Grade I & II (Department of Electrical Engineering) (25/08/2023 to 26/08/2023)
Member, document verification committee, Recruitment of Assistant Professors Grade I & II (Department of Mathematics) (13/09/2023 to 14/09/2023)
Member, document verification committee, Recruitment of Associate Professors and Professors (Department of Mathematics and Management (12/12/2023)
Member, Fee Remission Committee for B. Tech.- II, III & IV year during the academic year 2024-25 & 2025-26.
Faculty Advisor, B. Tech. I, Div. E in years 2010-11, 2011-12, 2012-13, 2013-14.
Faculty Advisor, B. Tech. I, Div. C in the year 2018-19.
Coordinator, Global (institute) elective allotment from November 2013 to October 2015.
Member, exam grade verification committee, from 29/05/2012 to May 2016
.
Training Programs & Conferences:
Training Programs & Conferences:
International Conference:
Member Secretary, International Conference on Advancements in Design and Tribology (ICADT-2021). 17-18 December, 2021
Training Programmes Coordinated: 19
1.Five days Self Sponsored Short Term Training Programme 'Advances in Materials Science and Engineering (AMSE-2016)', From 10/10/2016 to 14/10/2016,
Department of Mech. Engg., SVNIT, Surat under (TEQIP-II).
2.Five days Self Sponsored Short Term Training Programme, 'Advances in Materials & Design (AMD - 2021)', From 08/02/2021 to 12/02/2021, Department of Mech. Engg.,SVNIT, Surat under (TEQIP-III)
3.Five days Self Sponsored Short Term Trainig Programme, 'Advances in Materials & Design (AMD-2023)', From 30/01/2023 to 03/02/2023, Department of Mech. Engg., SVNIT, Surat.
4.Five days Self Sponsored Short Term Training Programme, 'Advances in Material Processing & Design (AMPD-2024)', From 13/05/2024 to 17/05/2024, Department of Mech. Engg., SVNIT, Surat.
5.Five days Self Sponsored Short Term Training Programme, '3rd Basics of Tribology and Its Industrial Engineering Application (BTIEA-2024)', From 20/08/2024 to 24/08/2024, Department of Mech. Engg., SVNIT, Surat.
6.Five days Self Sponsored Short Term Training Programme, ' Advances in Material Processing & Design (AMPD-2025)', From 28/04/2025 to 02/05/2025, Department of Mech. Engg., SVNIT, Surat.
7.Five days Self Sponsored Short Term Training Programme, ' Basics of Tribology and Its Industrial Engineering Applications (BTIEA-2025)', From 18/04/2025 to 02/05/2025,Department of Mech. Engg., SVNIT, Surat.
8.Short Term Training Programme on 'Vibration Problems in Plants & Machineries' From 14/06/2010 To 18/06/2010, Anchor Institute, SVNIT.
9.Short Term Training Programme on 'Nuclear Power Engineering' From 05/07/2010 To 09/07/2010, Anchor Institute, SVNIT.
10.Short Term Training Programme on 'Bearing Failure & Their Causes' From 15/07/2010 To 17/07/2010, Anchor Institute, SVNIT.
11.Short Term Training Programme on 'Computer Aided Design & Manufacturing' From 05/08/2010 To 07/08/2010, Anchor Institute, SVNIT.
12.Short Term Training Prograame on 'Bearing Maintenance Technology' From 18/08/2010 To 21/08/2010, Anchor Institute, SVNIT.
13.Short Term Training Programme on 'Energy Conservation In Steam Systems' From 27/11/2010 To 01/12/2010, Anchor Institute, SVNIT.
14.Short Term Training Programme on 'Computer Aided Design & Manufacturing' From 20/12/2010 To 21/12/2010, Anchor Institute, SVNIT.
15.Short Term Training Programme on 'Advanced Finite Element Analysis' From 22/12/2010 To 24/12/2010, Anchor Institute, SVNIT.
16.Short Term Training Programme on 'Fundamentals of Bearing Maintenance' on 24/03/2011, Anchor Institute, SVNIT
17.Short Term Training Programme on 'Overview of Welding' From 12/04/2011 To 13/04/2011, Anchor Institute, SVNIT
18.Short Term Training Programme on 'Welding & Brazing Qualifications - ASME BPVC Section IX' From 14/04/2011 To 16/04/2011, Anchor Institute, SVNIT
19.Short Term Training Programme on 'Lubrication of Rolling Element Bearing & Root Causes Bearing Damage Analysis-WE204' From 25/05/2011 To 29/05/2011, Anchor Institute, SVNIT
Google Sites
Report abuse