Home

DUE TO AN INJURY I AM PUTTING KNIFE SHARPENING ON HOLD. I WILL DO LOCAL LEO, FIRE DEPT, AND SOLDIERS KNIVES IF THEY BRING THEM TO ME.
 
CLICK ON THE SITEMAP (ON THE LEFT) AND THEN THE + SIGNS TO EXPAND THE SITEMAP IN ORDER TO SEE EVERYTHING 
(You can also click this link to see some pictures of some knives i made.
This is my new website where I will be posting pictures of the knives i make as a hobby. i also have some videos of knives in action showing how sharp I can get them. I use paper wheels to sharpen with but i do not sell them.
 
BEWARE OF KNIVES THAT ARE MADE IN PAKISTAN OR PAKISTAN DAMASCUS.  THERE MIGHT BE SOME INDIVIDUAL MAKERS FROM PAKISTAN THAT ACTUALLY MAKE A GOOD KNIFE BUT THESE MAKERS ARE FAR AND FEW BETWEEN. MOST OF THEIR KNIVES ARE ACTUALLY MADE FROM THE HIGH QUALITY STEEL THEY STATE IS USED IF THEY HAVE A WEBSITE. THESE KNIVES UNLIKE THE CHEAP KNIVES HAVE A MAKERS MARK. THE KNIVES THAT ARE UNMARKED ARE DONE THIS WAY TO ALLOW THEM TO SELL THEIR JUNK ON THE MANY AUCTION SITES. YOU GET WHAT YOU PAY FOR (AND MAYBE WHAT YOU DESERVE) IF YOU BUY A KNIFE WITHOUT DOING YOUR RESEARCH. THERE WAS A MAKER FROM PAKISTAN THAT JOINED BLADEFORUMS ONLY TO LIE ABOUT THE STEEL THEY USED. THEY HAVE SINCE LEFT THE FORUM. THE NAME OF THE COMPANY MUST HAVE CAME FROM THE ABBREVIATION OF RAIL ROAD TRACK SINCE THAT IS WHAT THEY STATED TO USE IN THEIR KNIVES IN A POST THEY MADE ON THE FORUM. (Rail Road Cutlery)
 
ANYONE THINKING OF PURCHASING A KNIFE MADE IN PAKISTAN BETTER THINK TWICE BEFORE THEY DO. ALL YOU NEED TO DO IS DO SOME RESEARCH FIRST. NOT ALL KNIVES MADE IN PAKISTAN ARE MADE FROM THE STEEL THEY ARE CLAIMED TO BE MADE FROM. THIS MEANS THAT THE BLADE WILL NOT HAVE A PROPER HEAT TREAT AND IT WILL NOT HOLD AN EDGE.
 
I WAS SENT A KNIFE BY A MEMBER THAT WAS MADE IN PAKISTAN AND I WAS ABLE TO FILE THE EDGE. THE MAKER STATED THE ROCKWELL HARDNESS IS SUPPOSED TO BE BETWEEN 59-60RC. IF THIS WAS TRUE, I WOULD NOT BE EASY TO CUT THE BLADE WITH THE FILE. AFTER GETTING THE BLADE ROCKWELL TESTED, IT CAME BACK AS 52 ALONG THE EDGE WHICH IS NOT HARD ENOUGH TO HOLD AN EDGE.
 
THE MAKER CLAIMS THE KNIFE HAS AN RC OF 58-60 RC. I AM GETTING ANOTHER BLADE IN FROM THE SAME MAKER FOR TESTING AND I SUSPECT THE SAME RESULTS. HIS KNIVES ARE NOT MARKED SO BEWARE OF KNIVES WHERE THE MAKERS NAME IS NOT ON THE KNIFE.  
 
I HAVE SENT OFF SOME OF THESE CHEAP KNIVES FOR ROCKWELL TESTING. MOST TEST AROUND 32RC BUT SOME HAVE EVEN BEEN AS LOW AS 25 RC WHICH IS REAL SOFT.
 
THESE GUYS TRY TO TALK UP THEIR KNIVES. THEY CALL THEIRSELF A KNIFEMAKER YET ALL THEY KNOW HOW TO DO IS MAKE KNIFE SHAPED OBJECTS. WHEN CONFRONTED BY ACTUAL KNIFEMAKERS THEY BECOME DEFENSIVE. THEY AVOID QUESTIONS THAT THEY ARE NOT ABLE TO ANSWER TRUTHFULLY.
 
DUE TO AN INJURY I AM PUTTING KNIFE SHARPENING ON HOLD UNTIL FURTHER NOTICE FOR THE GENERAL PUBLIC 
 
WORTH READING FOR A GOOD LAUGH AT A TROLL. THE MODS HAND HIM HIS A** IN BOTH THREADS.
(HE CHANGED HIS NAME EXCEPT FOR THIS FORUM)

SOME FUNNY STUFF HERE !!! BELOW ARE 2 LINKS THAT WILL HAVE YOU LAUGHING. THE FIRST IS TO A THREAD (STARTED BY PHUCKTARD #8) THAT THE MODS LOCK ON HIM. THE SECOND ONE IS EVEN FUNNIER. (THE LAST PAGE)  AND HE DOESNT EVEN OWN A STRAIGHT RAZOR. SEVERAL YEARS AGO WHEN I USED TO TALK TO THE TROLL HE TOLD ME HE NEVER STARTED SHARPENING TILL HE WAS 16 BUT TELLS THESE GUYS HE STARTED WHEN HE WAS 8. I DONT THINK A PLASTIC SPORK COUNTS AS A KNIFE SINCE THATS ALL HIS MOMMY LET HIM PLAY WITH. 

http://www.straightrazorplace.com/forums/advanced-honing-topics/45676-new-member-checking-3.html 
http://www.bladeforums.com/forums/showpost.php?p=9207988&postcount=710  same guy in above link mentioned in this thread

here are a few links to threads on bladeforums you can read from members who have sent me a knife for sharpening. http://www.bladeforums.com/forums/showthread.php?t=585019

http://www.bladeforums.com/forums/showthread.php/861580-Professional-knife-sharpening  i am putting sharpening on hold until further notice.

 
if you ever make it near myrtle beach sc, stop in at republic ice cream and tell brad you heard about his ice cream here.  http://republicicecream.com/

Anyone who likes coffee can get their coffee fix here. http://www.hemispherecoffeeroasters.com/  Paul has some good coffee from what my dad tells me since i'm not a coffee drinker. anyone sending me a large knife for sharpening can get some coffee sent back. the bags make great packing material. Paul also helps the growers unlike some of the big companies that only care about filling their pockets instead of helping the growers. if you wish for a list of available coffee and a price list send me an email or contact the shop.

HAVE YOU EVER HAD A KNIFE SO SHARP YOU WERE SCARED OF IT? (a buddy sent me an email after getting his knfie back. here is what he said)

I just got home after midnight and opened the box. The edge is amazing. I am scared to play with that knife now. Richard - you truly are the god of sharpening. Hats off to your skill.

Regards,
Murari

here is a post he made about the same knife.



I FOUND THIS POST ON ANOTHER KNIFE FORUM ABOUT MY SHARPENING ABILITY. (post #2) (i had a guy i used to talk to on the phone send me nasty emails using a fake account but he mentions something in the email that i only told him. how dumb is that?)   https://www.edcforums.com/threads/anyone-here-sharpen-knives-and-straight-razors.105173/
 
Here is a link to my paper wheel thread on Bladeforums. http://www.bladeforums.com/forums/showthread.php?t=578787 
Here is where you can get the wheels i use. http://www.sharpeningwheels.com/  you can also pick them up at any woodcraft store or through grizzly imports.
 .

 HERE IS A LINK TO MY OTHER WEBSITE  http://mysite.ncnetwork.net/ress6fq6/  due to illness i am putting sharpening on hold
 
 IF YOU ARE THINKING OF BUYING A BUSSE FROM LIU-KANG AKA DAN HUANG. READ THIS THREAD FIRST.  http://www.bladeforums.com/forums/showthread.php/1068292-Liu-Kang-Hopefully-this-wont-need-111-pages-to-work  JUST TO SEE HOW LOWLIFE THIS PIECE OF TRASH IS, READ THE POST AT THIS LINK. http://www.bladeforums.com/forums/showthread.php/876113-Liu-Kang-(Dan-Huang)-when-is-enough-well-enough?p=9953927#post9953927  HERE ARE A FEW LINES FROM THE POST.
 
"An honorable man, who after losing his mates and taking an unexploded RPG shell to the ribcage in combat during an ambush, came home to find himself in dire financial straites..."
 
"A good man whose desperate situation you (DAN HUANG AKA LIU KANG) took advantage of by severely lowballing him on Busse knives you knew you could flip for maximum profit all the while knowing that he needed as much money as he could get from them."
HE TOOK ADVANTAGE OF AN INJURED VETERAN THAT HAD TO SELL HIS KNIFE COLLECTION IN ORDER TO KEEP HIS HOUSE. HERE IS A LINK TO HIS FOR SALE THREAD ON BLADEFORUMS. http://www.bladeforums.com/forums/showthread.php/778747-Desperate-times?p=8725585#post8725585
 
 
BEFORE BUYING ANYTHING IT IS ALWAYS A GOOD IDEA TO CHECK BLADEFORUMS TGBU THREAD TO SEE WHO NOT TO DEAL WITH. take this guy for instance. he started a thread to warn others not to deal with this one member only to have the tables turned on him. luckily a mod edited the thread to warn others not to deal with TULKU.

http://www.bladeforums.com/forums/showthread.php/1458751-bh49-is-not-bad-news-beware-of-Tulku    tulku started the thread saying bh49 was bad to deal with.

 
BLADEFORUMS HAS A NEW RELIABLE WATERJET SERVICE WITH 10 YEARS OF EXPERIENCE IN THE SAME LOCATION. http://www.bladeforums.com/forums/forumdisplay.php/869-Waterjet-by-H2Oknife   MARKS HOSTED FORUM. CHECK IT OUT!!!
 
YOU CAN TRUST YOUR DESIGNS WITH MARK.    
  
ALONG WITH WATERJET CUTTING THEY OFFER TITANIUM WELDING IN AN INERT ATMOSPHERE.
ISO 9001 CERTIFIED
 
 anvilfire.com   IS a unique resource for blacksmiths and related metal workers. anvilfire is your best on-line metalworking information source.
 
my favorite tv hunting and fishing show http://www.outdoorsmanint.com/html/body_theoutdoorsman.html
 
http://burlsales.com/    It's a Burl has been building burl wood furniture as well as providing burl wood and other unusual woods to professional woodworkers, luthiers, artists and knifemakers since 1977. We use this very same wood to make the furniture and works of art we sell in our own galleries.

 
here is a friends bed and breakfast if anyone is traveling and wants a nice place to stay. plenty of rooms for large groups. http://www.historichopkinshouse.com/B_BChampaign_Co_Information.html
 
anyone who likes woodcarving and is looking for carving knives and supplies can find them here https://mychipcarving.com/
 

IF YOU ARE INTO BATTERY POWERED RC CARS, PLANES, CHOPPERS, BOATS AND NEED BATTERIES OR CHARGERS, DAVID AT PROGRESSIVE RC CAN FIX YOU UP.

http://www.progressiverc.com/?gclid=CJfQiOnevLsCFa4-Mgod7W0AOA

 

THE  VIDS IN THE SECTION BELOW ARE OF KNIVES I SHARPENED FOR FELLOW FORUM MEMBERS.  CLICK ON SITEMAP  ON THE LEFT TO SEE THE ENTIRE SITE (or the link i put up at the top of the page)
 
(i was notified of a problem with the vids below not working. i was getting notificatioins in my email that i thought were attempts to gain acccess to my website and denying access to view the vids below. if there is any problems viewing the vids below, you can send me an email that will allow me to give you permission to view the vids. i hope to fix the problem where everyone can view them anytime) 
 
Subpages (1): more knife pics and vids
č
bm710d2.AVI
(4704k)
richard 1,
Mar 20, 2009, 2:53 PM
č
bradleyalias.AVI
(2108k)
richard 1,
Mar 25, 2009, 11:27 AM
č
buckstrider.AVI
(1694k)
richard 1,
Mar 25, 2009, 11:31 AM
č
hinderer.AVI
(3011k)
richard 1,
Mar 16, 2009, 8:47 AM
Comments