all samsungs manual programming codes

Samsung R915 c
Device and Programming Instructions:
  • Turn on your phone using the power button.
  • While in the programming mode the [save] key is used to save, the [cancel] key is used to go back.
  • Enter ##626* (##NAM*) for BASIC NAM Programming
  • You will be prompted to ENTER SUBSIDY CODE
  • Enter 333333 or 000000
  • Select MDN (Mobile Directory Number/10 Digit Phone Number)
  • Enter your new 10 digit MDN and press Save.
  • Enter your new 10 digit MIN and press Save.
  • Enter the 1 to 5 digit CDMA System ID and press Save.
  • Press Done. Your phone will reset.

Samsung SCH u820

  • Menu > Settings > Phone info
  • Slide out keyboard and press the following key combination "Fn + 8"
  • Enter SPC 000000 or 468346
  • Touch Network Settings
  • Touch Phone Number and stary typing new MDN (10digit Phone Number) then press OK
  • Touch NMSID and stary typing new MIN with 2 zeros in fron (00 then 10digit MIN Number) then press OK
  • Touch Home SID/NID and verify the HomeSID is correct for your location and press OK
  • When Done press Exit
  • Phone will powercycle and programming is now complete.
  •  

    Samsung SCH-i100

    Device and Programming Instructions:

    Bring up the Dial-pad

    Dial **772 and enter SPC 000000 or 468346 then press OK

    Use the ‘Down’ button to navigate through the pages instead of ‘Enter’ button

    Press Down at MEID, ESN, and AKEY screen

    Press “Touch Here” and enter MDN (10-digit phone number) then press Down (on keyboard)

    Enter MIN/MSID (10-digit phone number) then press Down key (on keyboard)

    Verify HomeSID then press Enter key (on keyboard)

    Press Enter once more to exit programming

    Phone will power cycle and programming is now complete.

    If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

      • ##3282# > Edit > SPC > others > multimedia
      • Above method was tested changing all IP's to 0.0.0.0 and all Ports to 0
      Samsung SCH-i400 Continuum
      Device and Programming Instructions:

      Manual Programming

      • Enter **772 to enter service programming and enter SPC 000000 or 468346 then OK

      • Press Enter to skip MEID, ESN, and AKEY

      • Enter 10-digit MDN at "CDMA Directory#" screen followed by Return

      • Enter 10-digit MSIN/MIN followed by Return

      • Verify CDMA HomeSID then press Return twice when done

      • The phone will power cycle and programming is now complete

      If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

        • ##3282# > Edit > SPC > others > multimedia
        • Above method was tested changing all IP's to 0.0.0.0 and all Ports to 0
        Samsung SCH-i500
        Device and Programming Instructions:

        Manual Programming:

        • Power the phone on and open up the dialer

        • Enter **772 to enter service programming and enter SPC 000000 or 468346 then OK

        • Press Enter to skip MEID, ESN, and AKEY

        • Enter 10-digit MDN at "CDMA Directory#" screen followed by Return

        • Enter 10-digit MSIN/MIN followed by Return

        • Verify CDMA HomeSID then press Return twice when done

        • The phone will power cycle and programming is now complete

        If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

          • ##3282# > Edit > SPC > others > multimedia
          • Above method was tested changing all IP's to 0.0.0.0 and all Ports to 0
        and also u might need to >>>
      • To Bypass Activation:
      • Press "Emergency Call"

        To ensure that the Hiddenmenu is Enabled follow the steps below:

        Dial *#22745927

        Enter SPC 000000 or 468346 then select "Hiddenmenu Enable" followed by OK

        Pull up the Dial Pad and clear any previously entered numbers. Then type *#83786633 then press the Home key and you should have now bypassed activation.

        After you press "send" press the "home" key and you should now be passed activation.

        Continue with above steps.

        Samsung SCH-i500 Mesmerize
        Manual Programming:
        • Power the phone on and open up the dialer
        • Enter ##626# to enter service programming and enter SPC 000000 or 468346 then OK
        • Select Edit
        • Press "Touch Here" at bottom of screen.
        • Enter 10-digit MDN at "Phone Number" screen followed by Return
        • Enter 10-digit MSID/MIN followed by Return
        • Press Done at Service Menu screen
        • The phone will power cycle and programming is now complete

        If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

          • ##3282# > Edit > SPC > others > multimedia
          • Above method was tested changing all IP's to 0.0.0.0 and all Ports to 0
      • Samsung SCH-i910
        • Power the phone on
        • Enter **772 on the dial pad
        • Enter 000000, then press OK
        • When ESN/MEID is shown press center button on phone.
        • At CDMA Directory screen enter MDN (10-digit number) and press center button
        • At MSIN screen enter MIN (10-digit number) and press center button
        • Verify SID is correct, then Exit the Service programming
        • Phone will reset and programming is now complete
      • Samsung SCH-R311 and and thing R31? 
      • device and Programming Instructions:

        Manual Programming

          • Power the phone on
          • Press the menu key
          • Go to settings and Press *
          • Enter 000000 or 141887 for SPC
          • Scroll to Network Settings press OK and select NAM1
          • Select Phone number and enter 10 digit number followed by OK
          • Select MIN and enter 10 digit number followed by OK
          • Verify that the HomeSID is correct for your location and press OK
          • Select Exit when done to complete programming
          • Phone will powercycle and programming is now complete

         

        samsung sch-r 350 and up to

        • Power on the handset
        • Enter ##626*
        • Enter 000000 or 141887
        • Select Network Settings then Nam1
        • Enter in MDN phone number (10 digit number), then click OK
        • Enter in MIN phone number (10 digit number) then click OK
        • Verify that the HomeSID is correct for you location then exit.
        • Your phone will reset and programming is now complete

         

         

         

              Comments