MILL PRODUCERS OF WELDED STEEL TUBING
CR, HR, P&O, stainless, galvannealed, galvanized & clear-coated galvanized tube
PITTSBURGH TUBE & STEEL div. of TUBE LLC
We are mill producers of welded tube. We have tubing mills strategically positioned to serve the manufacturing industry in North America. Our facilities are ISO and TS certified.
At Pittsburgh Tube & Steel we understand the importance of producing quality products and delivering your material on time. With efficient production scheduling and available mill stocking programs we will keep your business running smoothly.
The welded tube process begins with steel coils. Welded steel tubing is only as good as the steel you use and we only use the best steel coils. Certifications are available with all shipments. Test reports are provided upon request. Our slitting capabilities offer superior quality control and fast reaction time for our flat rolled steel coil requirements. Our tubing is produced in the USA.
A513 Tube Type 1 & 2 As-welded A513
steel tubing is produced up to 4.000" diameter. Our smallest OD is .500" round.
Squares and rectangles are produced in dimensions up to 2.5" x 2.5" and 1.5"
x 2". We run cold rolled, hot rolled, P&O to produce our tubing. (See below for coated steel tube) Weled steel tube is produced flash in or flash removed, haven cut or saw cut.
A500 Tube We are mill producers of A500 structural steel welded tubing. Secondary cutting and end finishing is available. Our ISO certification guarantees that every tube is manufactured to the highest standards. Contact us to place your mill order for A500 Grade A, B and C structural tube. HSLA products are available up to 90,000ksi. Our maximum OD is 4" diameter.
Galvanized, Galvannealed, Galvalume and Aluminized ASTM A787 Tube Electric welded pre-coated galvanized galvannealed, galvalume and aluminized steel tubing is produced to ASTM A787 specifications. Starting with premium precoated steel coils, our corrosion resistant metallic coatings provide excellent protection inside and outside of our welded tube. We offer remetalize, flash control, de-dimple and secondary cutting to your special length requirements. Dimensions are available in rounds, squares and rectangles and special shapes. Our maximum OD is 4" diameter.
GalvTube with Clear-Coat Our mills produce electric welded galvanized steel tubing to ASTM A787 specifications. GalvTube is produced with pregalvanized steel offering a galvanized alloyed coating on the ID and OD. Combined coatings of Zinc and OD clear-coat provide excellent corrosion resistance. Our clear coated galvanized tubing is often used for handrail, barriers, fence, greenhouses, storage buildings, carports and other structures. We
produce sizes from .750" to 3" including fence tubing in 1.315",
1.660", 1.900", 2.375", 2.875" round. Shapes are offered in squares
from .500" x .500" to 2.500"x 2.500" and rectangles up to 1.000" x
3.000". We swage the ends too!
Greenhouse Tube Our greenhouse tubing is available in galvanized (inside and outside diameter) with a OD clear-coat. GalvTube is produced to ASTM A787
and A500 physical standards. GalvTube is available with a 50,000 minimum yield strength. Our coated
greenhouse tubular products offer superior corrosion resistance on the
inside and outside diameter of the tubing. Our standard galvanized
coating thickness is G90. Please contact us for round, square or
rectangle galvanized clear-coated tubing for your framework structures. Dimensions from .750" to 3" round and 1" square to 2.5" square. Visit GalvTube for more information.
ZAM coated tubing (Zinc Aluminim Magnesium) "ZAM® is a highly corrosion-resistant hot dip coated steel that has a coating layer of zinc, 6% aluminum, and 3% magnesium.", states the raw material producer. We use this flat rolled steel in the production of our tubing. Dimensions are produced as large as 2.50” Rd, 2.0"x2.0" Sq and 1.5"x 2.0" Rec.
ZAM was tested up to 4,000 hours in controlled salt spray testing yielding superior results when compared to other zinc and zinc aluminum coatings. The appearance of ZAM, with a .40oz/ft² coating weight on one side and no chem treat, showed minimal white rust after 4,000 hours. Salt spray testing was performed in accordance with SST: JIS Z2371. which is very similar to the ASTM B117 standard.
Please contact us for more details regarding our size range offered with this unique coated tube. #zam #galvtube #galvalume #galvanized #gatorshield #zincflocoat
Stainless Steel Tube
A554, A249 and A269 welded stainless tube is available in rounds,
squares and rectangles. Our primary stainless grade is 300 series stainless steel. Finishes are available in brushed, polished and
bright annealed. Lengths are available from 6" to 40 feet and coiled
tubing up to 20,000 feet.
CUSTOM ROLL FORMED SHAPESRoll Forming Company
is capable of producing shapes up to four feet wide and sixty feet long. The maximum material thickness available is .300". Roll forming is available in angles, channels, hat sections and complex shapes requiring up to 30 stands. Send us your prints. We are up to the challenge. Our roll form lines have high frequency and laser welding capability. We can produce welded tube in almost any profile. Our roll forming mill is ISO/TS 16949 & ISO 14001 Certified. You can be confident that we are your best choice in choosing a roll forming company.
PITTSBURGH TUBE & STEEL
Mill minimum quantities apply for all orders.
PT&S, Old Rte 8 N, Valencia, PA 16059,
Office Hours: Monday through Friday
8:30 A - 4:00 P EST.
Division of Tube LLC