Tunnel Client

If you are here you must have already configured the   Tunnel Server   page.  If you haven't, then go back now and nobody gets hurt!

You have three fields to fill out on the   Tunnel Client   page:
     Server:  Enter the WAN address of the Tunnel Server node (See Node Status screen).
     Pwd:     Enter the password that you entered on the   Tunnel Server   page for this Client.
     Network: Enter the Net IP address from the   Tunnel Server   page.

After filling out these fields, click the "Add" button.

After the information generates a new line, put a check mark in the Enabled? box and click on the "Save Changes" button.

Note:  Make sure the Node Name for the Tunnel Client is no more than 22 characters long!