Mywifiext may be a web address that's used for the Netgear Extender setup. Using this URL you'll change the settings consistent with your preference, update firmware then on. this is often a login page through which you'll use the wi-fi extender device. To use this web address the Netgear extender should be physically connected to your PC with an coaxial cable or with a wireless connection.

How to setup Netgear Extender using Mywifiext?

  1. The very very first thing you would like to try to to is to attach your Netgear Wi-Fi Extender to an influence socket within the wall.
  2. To connect your computer to the Netgear Extender use either the wired or wireless connection mode.
  3. Link your Netgear range extender to the Netgear’s wi-fi connection just in case you've got a wireless extender.
  4. Whereas, if you've got a wired connection, use the coaxial cable and fasten one end of the cable with a computer and another end to the extender. 
  5. Open the online browser of your choice on your computer and sort “” within the Address bar. Hit the Enter key on your keyboard and await the pages to load appropriately. 
  6. Now, search for the “New Extender Setup” tab on the left-hand side of the screen. Hence, you would like to pick this tab. 
  7. After this, within the next window, you would like to make an account first. For this, you've got to enter the specified details in their respective fields. 
  8. Thereafter, login to the Netgear account using an equivalent credentials that you simply have mentioned at the time of account creation. 
  9. After log in to your account successfully, choose the “Next” tab. 
  10. This will take you to the welcome window of Netgear Genie. This window contains two tabs “Wi-Fi Range Extender” and “Access Point”.You can choose any of the methods for the setup of your extender. 
  11. Click on the “Wi-Fi Range Extender” tab to proceed further with the method of Netgear Extender Setup. 
  12. It will display the list of obtainable existing router networks that are available around you. From this list of options, select the network that you simply want to increase. choose one band network or dual-band consistent with the router network you're using.
  13. Tap the “Next” button from the center of the page. 
  14. In the subsequent window, enter the password for the router network connection that you simply have opted within the last step. 
  15. Select the “Next” tab after entering the password within the respective field correctly.
  16. Now, you've got to attend for a few time until the connection is about up. 
  17. After this, it'll move you to a replacement screen, where you've got to type within the extender name and security settings for your wi-fi extender. Here, you'll also change the password if you would like to consistent with your wish. Then, tap “Next”. 
  18. Review the network details from the screen that appears and tap “continue”. 
  19. With this, the setup procedure of the Netgear router is complete up here .

Points to remember when your Mywifiext is not working properly

  1. Ensure the distance between the Netgear range extender and therefore the router should be sufficiently close when fixing a variety extender.
  2. You need to put your extender also as a wireless router within the same room. 
  3. Place extender and router at the acceptable location after configuring your device.
  4. Use coaxial cable to attach your computer to the Netgear extender.
  5. When your Mywifiext isn't working, then use different your browser, and check out again.
  6. “Plugin” your Netgear range extender to an influence source, and wait a short time until the LED light turns green.
  7. Use a special browser to login to so as to form sure that the difficulty isn't associated with the browser. you'll use the online browser like Google Chrome, Mozilla Firefox, Safari, etc.
  8. In case, the online address “” isn't working properly, use “” which is that the IP address of Netgear router. 
  9. Check whether the Netgear extender is plugged into an influence source or not. If the extender is connected properly then the facility LED lights of the extender start blinking.