Products‎ > ‎

MotorPixie Gimbal Limited Edition

Materials needed (incomplete)

  • 2 mm aluminium plate
  • 4 pole male 3.5 mm jack with wire (preferably from an old phone headset)
  • 4 pole female 3.5 mm jack
  • 4x 3mm metal screws (6-8mm)
  • 4x 3mm nylon screws (20mm)
  • 4x 3mm nylon sprockets
  • 4x 3mm spacers (10mm)
  • 2x 5mm nylon screws (20mm)
  • Power switch (optional)
  • Reset switch (optional)
  • 2x brushless gimbal motors (2206/2208/2209 type)
  • BaseCam controller board
  • IMU

Tools needed

  • Coping saw
  • Power drill
  • 2 mm drill bit
  • 2.5 mm drill bit
  • 3 mm drill bit
  • 6 mm drill bit
  • 9 mm drill bit
  • 3 mm thread-tapping tool
  • File
  • Fine sanding paper
  • Vices
  • Hammer
  • Photomount-type of glue (or a simple glue stick)
  • PC and printer for printing template, calibration IMU and applying 7th channel Gimbal Tool
  • Solering iron
  • Solder

Build instructions (incomplete)

Comments