Page 26

13 May 2010
OK, I got over zealous when applying the aft and fore decks.  I glued and nailed both all the way to the joint.  That meant I could not do the overlap and trim thing with the two side panels.  What I was able to do is place the side decks onto the sheer clamp and carlins and reach over and under the carlin at the rear joint and draw a line.  Then, I simply extended that line and trimmed the panel.  As seen in the photo below, I already trimmed the aft and fore decks.



I also cut out the hatches tonight.  The hatch doublers are being epoxied into place.

Comments