Vintage BOAT PARTS FOR SALE

 
  

____________________________________________________________________________________________________________________________________________

"NOTICE TO DEALER"

Chris Craft Corp "Notice To Dealer" :   original/factory location/size  specs for Engine Box

LAUNCHING BOAT Guidelines from Chris Craft Corp:  Make your boat even MORE authentic



It Reads:

NOTICE TO DEALER

THIS BOAT HAS NOT BEEN WATER TESTED, BEFORE DELIVERING IT TO THE CUSTOMER IT IS NECESSARY YOU MAKE THE FOLLOWING INSPECTION AND ADJUSTMENTS:

1. See that the hull drain plugs are in place before launching the boat.

2. Close engine drain plugs.

3. Check all wiring for loose connections. Check for shorts by turning all switches "off " then touch battery terminal to battery post and watch for sparks.

4. Check all gasoline line fittings and connections. Fill gasoline tank. Open shutoff valvve. Re-check for leaks after putting in gasoline. (important). Check overflow vent.

5. Check engine oil level.

6. Start engine, check oil pressure and for leaks at guage and engine. Check engine water circulation by noting water coming out of exhaust pipe. Check ammeter for charging. Let the engine run for 10 or 15 minutes at 1000 R.P.M., with gear in forward position.

7. Water test boat. Drive at top speed for not more than 3 to 5 minutes and note maximum R.P.M. then readjust carburetor and spark for increased R.P.M.

8. Check shaft alignment and stuffing box. (Recheck again in 2 or 3 days.) Allow 48 hours for hull to soak up before leaving in water unattended.

9. Advise customer not to drive boat faster than three-quarter throttle for first 10 hours.


$9.99 + S&H$7.25

please contact mccallboatworksdon@gmail.com


Chris Craft copper exhaust pipes


2.5" Copper exhaust pipe, .064 thickness. Fits 17' or 19' Chris Craft Barrel Back, Pre-bent specs to fit properly, have to cut for length.
$750 each, 3 available.

Chris Craft CUST 20' V WINDSHIELD

$3,000 + S&H ($75) 
  • This piece was originally purchased for a Chris Craft Cust 20' boat  
  • This piece is incorrect by a 1/2"
  • The joints need to be re-fit OR cut down to fit your boat specs.
  • This can work great for the right project
  • Easily fit 19' barrel back or Custom 20'
Please email mccallboatworksdon@gmail.com if interested

Chris Craft DUPLEX OIL CAN

Chris Craft Boat Marine Vintage Quaker Duplex Inboard Engine Oil Gal Can Remanuf

$120 + $S&H

This is a re-manufactured vintage one gallon Duplex Inboard Engine Oil Can. 

Pre and Post war Chris Craft runabouts came equipped with this oil can by/in the engine box.

The sides of the can advertise Duplex Outboard Motor Gear Grease.

There is a graphic of a runabout on the front side.

These cans were manufactured by Quaker State Oil Refining Corp. in Oil City, PA.

This is an excellent replica to re-create your runabout back to original. 

Please email mccallboatworksdon@gmail.com if interested


Chris Craft Ignition Switch and Bezel

1940-1956 Chris Craft Boat NEW Replacement Ignition Switch & Bezel

$79.99 + S&H ($7.25)

Comes with:
  • two position Cole Hersee switch

  • two keys

  • bezel

  • specify 2 or 3 pole

email mccallboatworksdon@gmail.com if interested

one buyer's comment: 

SWEET!!!! Very nice pieces.
WOW....super high quality and works perfectly on my dual ignition switches.....
extremely hard to find Worth every penny. Very pleased!!..Thanks

if interested email mccallboatworksdon@gmail.com

Chris Craft STEERING WHEEL

Chris Craft Classic Vintage Steering Wheel

EXC CDTN,  re-manufactured.


$800 + S&H ($25)


6 colors to choose from:
red/white/black/ivory/light tan/dark tan
  • New Chrome Throttle Lever
  • New Chrome Steering Wheel Column
  • New Horn Button to match steering wheel color
  • Accessories for attachment
  • Steering Wheel Column 27 1/2"  31 1/2"
email mccallboatworksdon@gmail.com if interested

Glass Stern bulb - Rare

Very rare Glass Stern Pole Globe, for Chris Craft, Gar Wood, or Dodge Boats
2 Bulbs available, $800 each
 Century Boat Resorter Emblem