DCC Welcome Page‎ > ‎NCE Info‎ > ‎NCE Cabs‎ > ‎

Cab05

MODELS COVERED (in picture order): CAB05 / CAB05R

PART NUMBERS:
CAB05:    BUTTON CAB
CAB05R:  BUTTON CAB with radio (and toggle switch)

CAB CLASS:  Engineer



CAB HISTORY/DESCRIPTION:

CAB05 evolved over time.  The original Master Series is the older discontinued non toggle version is picture on the left that has a green LED.  The picture on the right shows a current production toggle radio version.  The green LED was changed to RED.


TOGGLE SWITCH VERSION

Latest versions of the CAB05 introduced a toggle switch on the top.  This allowed the operator to control two trains at once with the flick of a switch.  What is really happening is the toggle switch dynamically changes the cab's ID number between two preset ID numbers.   But only one is active at any given time.  You can also think of having two cabs in one. One for each train sharing a common case.  A split personality selected by the toggle switch.   You could also think of it as virtually unplugging one cab and plugging in the other as if you had two separate cabs.  That is exactly how the command station sees it.


RADIO VERSION

The Radio adds a R suffix after the CAB05 name.  Does not matter it the cab is pot or encoder.

NCE did offer "radio upgrades" to existing cabs when the radio option was first introduced so a customer did not have to buy new cabs to enjoy radio operation.  The original upgrade came in kit form and was installed by the customer.  However customer had various level of success with the kit installation.  For warrantee reasons NCE discontinued the upgrade kit and offered to do the radio upgrade at the factory for a fixed price.  Today the upgrade is no longer offered.


STATUS LED

The Status LED gives you status information about the state of the keyboard and button press action.

1) When the LED was off, the keypad was being used as a function control keypad.  Each key number was a function number.
2) When the LED was on, the keypad was setup for data entry of something like a engine number or a macro number.
3) The LED would always blink when a button was pressed.  It did not matter if the LED was ON or OFF.   This gave you physical verification that your button was pressed.


SETTING THE CAB ID/ADDRESS.

The factory default Cab ID/Address value is the same for given class of cab.   On a given layout, every cab must have a unique cab ID/Address REGARDLESS of what class of cab it is.  The layout owner must to assign unique ID/Address between 2 and 63 to very physical cab.  It is best to make the cab with the address number on it and make a list so you do not create two cabs with the same ID.  Once assigned, the cab will memorize the ID/Address you assign to inside itself and it does not change even when you use the the given cab on multiple NCE layout. 

The process of setting the cab address require one holding down the SELECT LOCO key when you turn on the cab or plug it into a cab panel that is on.  The cab will wake up with the Status LED on.  Press the number to be assigned to the cab and then press the ENTER key.  The LED will go out and the cab will no use that ID going forward.  


RESETING THE CAB and DEFAULT ID/ADDRESS

The process of reseting the cab starts the same way as setting the cab ID/Address.  However if you enter cab ID/address 0, the cab will reset back to factory default values.   

DEFAULT CAB ID/ADDRESS (NON TOGGLE VERSION) = 5


PRODUCTION STATUS:
All in current production.

ALTERNATIVE CABS:
CAB04 / CAB06

2/23/18