2. Gun Holsters‎ > ‎

SPECTRE

James Bond - Spectre PPK holster

Spectre armourer Dave Evans made five PPK holsters for the teaser poster, hero version and stunt work. 
One of the five was auctioned at Christies in February 2016. 

These are custom made replicas of the Evans teaser poster and auction designs. 

Each holster is made from hand dyed quality tooling leather 
with all seams hand saddle stitched using strong linen thread.

Holsters are made to hold model PPK with standard wraparound grips. 
Please advise when ordering if holster is to hold the larger PPK/S frame

Teaser poster or Auction version?
 
The teaser poster holster has; a Sam Browne stud on the retention strap, 
a double thickness thumb break section and the rig attachment lugs as a separate 
section sewn into top seam between front and back sections.

The stunt holster sold at auction featured; a gunmetal finish ring sprung 
press-stud on the retention strap, a single thickness thumb break section and the rig 
attachment lugs as an integral part of the back panel of the holster.    

Retention strap:
 
Sam Browne stud 
 
As per the Spectre teaser poster the large brass Sam Browne stud on the 
retention strap fastens through the thumb break section on the rear of the holster.


Press-stud
As per the auction holster the large ring sprung gunmetal finish press-stud 
on the retention strap fastens onto the inside of the rear thumb break section.  

               

Shoulder rig:
 
All models have the adjustable length strap fitted with a brass screw rivet slotted 
through the back of the shoulder rig as per the screen seen and auction examples.

     

The shoulder rig is fitted with a sturdy black elasticated strap. 
This runs through a screen accurate buckle allowing easy adjustment of the length. 


Three levels of detail available:

1.    Deluxe
£115 (Sam Browne stud)
£95 (Press stud)

The closest you'll get. 
 
Half double stitched row on bottom seam (screen & auction).  
Adjustable length strap with screw rivet slotted through back of rig (screen & auction).
Front of rig strap secured with looped leather cord (teaser, screen & auction). 
Fully stitched top attachment points for shoulder rig (teaser, screen & auction)
Stitched double piece bottom extension linking to elastic strap (screen & auction).
Elastic strap stitched and screw riveted to extension piece (screen and auction)
 
 
 
 
  
 
  
 
 
    

2.    Cut-away
£80 (Sam Browne stud)
£72 (Press stud)
 
A simplified version geared towards real world concealed carry.
 
Single stitched bottom seam in 'cut-away' shape for better grip on pistol and easier draw.
Shoulder rig attach arms are integral part of one layer (as per auction example). 
Adjustable length strap with screw rivet slotted through back of rig (screen & auction).
Front of rig strap secured with r
emovable brass screw rivet.
Fixed rivets on top section attaching loops to shoulder rig.
Elastic strap attached to riveted single piece extension section.
 
These can also be made in the Deluxe configuration - see bottom of page.

 


3.    Simplified
£90 (Sam Browne stud)
£82 (Press stud)

Same holster as the Deluxe model but shoulder rig fittings are riveted rather than stitched.

Double stitched section on bottom seam (screen & auction).  
Shoulder rig attach lugs are integral part of one layer (auction).
Adjustable length strap with screw rivet slotted through back of rig (screen & auction).
Front of rig strap secured with r
emovable brass screw rivet.
Fixed rivets on top section attaching loops to shoulder rig.
Elastic strap attached to two piece riveted extension section.
 
 
 

Custom colour & hybrid versions

Mix and match features of models for a fully custom holster.
Holster can be made in Black leather or any one of 10 shades of Brown.


Semi-Cutaway / Deluxe hybrid with full double stitch row bottom seam - £115
 

Full Cutaway / Deluxe hybrid, press stud closing - £90
 

Any of these can be ordered 'holster only' on request (fit your own shoulder rig).
Shoulder rig section can be ordered separately (fit your own holster).