My FMS models

Here, you can find models that I have created for FMS, Flying Model Simulator. 

Hello Everyone! FMS, or Flying Model Simulator, is a good place to start out or to perfect your R/C flying skills. Below are some FMS models that I have created, and some information on each. Enjoy!

 

 

This is the Parkzone Typhoon 3D RTF, a great 3D aerobatic parkflyer. It is not a flat-foamy type aircraft; it has a full fuselage, thick semi-symmetrical airfoil, and  is made of Parkzone's "Z-foam." This model will hover, torque roll, knife edge, and do any other 3D maneuver that you can throw at it.  Click here for more information.

Click here to download the Parkzone Typhoon.
 

NOTE: PARKZONE TYPHOON 3D RTF HAS BEEN UPDATED! PLEASE DOWNLOAD AGAIN!


 




This is the Parkzone F-27C Stryker, a redesign of the very popular Parkzone F-27B Stryker. This new Stryker features Z-foam construction, elevon control, and a high-speed high-torque brushless motor direct-driving a 6x4 propeller to achieve speeds of over 80 mph. It comes with an 11.1 volt, 2200 maH Li-Poly battery for optimum run time and power. Click here for more information. 


Click here to download the Parkzone F-27C Stryker.


 

 

 

 

This is the Parkzone J-3 Cub, a sturdy and well-mannered replica of the famous Piper J-3 Cub of the early 1900's. It is three channel, featuring rudder/elevator/throttle control, and is powered by a geared 370 motor. Click here for more information.

*This model is modified from the original, made by "justletmesearch," and features more realistic control throws and a tendency to nose over on landings, just like the real model. Also, the color has also been tweaked. To take off, hold full down elevator, as the small wheels catch and will nose over otherwise.

Click here to download the Parkzone J-3 Cub.