LA-2050 / LA-2025 - Stand-Alone Logic Analyzer

Click to Download LEAPTRONIX LA SERIES Presentation

Introduction

The LA-20 Series helps minimize users' project risk by providing the most reliable, accurate data capture and a complete view of system behavior. These products are ideally suited for users on hardware/software debugging, parametric, mixed signal testing, and complex debugging.

Moreover, their compact size and ability to connect with a PC for analysis and data logging make them an ideal solution at remote sites.

Features

Logic Analyzer :

• External (synchronous) and internal (asynchronous) capture ꞉ Offer a more convenient environment for engineers.

• Provide three sets of searching data functions and six cursor marks. The timing of each trigger point can be shown by the cursor mark.

• Binary code and hexadecimal List mode (State) display.

• Able to save measuring data and waveform results in stand-alone mode.

• Offer I2C, SPI, UART and CAN signal decoding function on PC.

• Provide various signal trigger and capture ꞉ Total of four kinds of trigger modes including Pattern/Edge/AND/OR.

• Pre-trigger, post-trigger, 3 level trigger, and continued-trigger functions allow users to operate easily.

• Bus analysis and glitch capture functions: 2M Bytes~4M Bytes long memory depth~each CH memory depth is up to 512 Kbits~1 Mbits.

• The adjustable sample rate size can be set by users, which avoids long capturing time.

• Provide "Trigger Counter" and "Pulse Wide Trigger" function.

• High-speed Zoom In / Zoom Out techniques.

• Smart software provides text file for saving the Binary Code of waveform results.

• Compact, portable for engineers to perform debugging.

• 5.6 inch TFT color LCD display.

• USB 2.0 interface for PC link function, which can connect with PC for user to save, analyze, view and printout.

Data Logger

• Provide friendly software, no matter what program language, just key in the timing,trigger condition and logic level etc, then start the data acquisition.

• Use binary for logging the code.

PC System Requirement

• Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )

Standard Accessories

• Main unit x1

• Data pod x4

• Lead set x4

• Testing probe (testing hook) x36

• AC power cord x1

• CD x1 (Driver and user manual are included)

• USB cable x1