Embedded Files
Universal & Gang Programmer SU-6000 Introduction
Universal & Gang Programmer SU-6000 Introduction
Universal & gang programmer SU-6000 provides the highest speed and stability.
Universal & gang programmer SU-6000 provides Bad Block Skip programming, verifying, master reading and device analysis functions for the special application of NAND Flash.
In addition, the innovative adapter design which lets users change adaptors quickly and save the cost of consumptive materials for mass production.
Universal & gang programmer SU-6000 transmission rate is up to 480M bytes/minute.
Universal & gang programmer SU-6000 is able to support 4 sites NAND Flash Bad Block Skip programming, verifying and master reading at the same time.
Universal & gang programmer SU-6000 is able to simplify the preparation and increase the work efficiency when mass production.
Universal & gang programmer SU-6000 is undoubtedly suitable for engineers to overcome the next generation IC programming issue with the outstanding characteristics.
Universal & gang programmer SU-6000 features
Universal & gang programmer SU-6000 features
Support NAND Flash Bad Block Skip programming & verifying on 4 sites simultaneously.
Ultra high NAND Flash programming speed: 32M bits/sec.
Intelligent NAND FLASH master reading: Bad Block Skip or whole device reading.
Auto-detect function: wrong insertion of device, bad connection of pins, etc.
Innovative adapter design: Support different packages by changing adaptor.
Independent socket circuit: Increase the security and stability.
High speed data transmission: 480M Bytes/minute.
Stand-alone industrial LED start button: Pass, Fail, Work LEDs on each site.
Operating software for mass production: working by project, control programming quantity, yield rate statistics, etc.
User-friendly: flexible for adjusting the operation angle, able to lay the unit horizontally or obliquely.
Built in auto-switching power: Support 100V~240V AC input.
Universal & Gang Programmer SU-6000 Specification
Universal & Gang Programmer SU-6000 Specification
User RAM：64 MBytes
Button/Switch：START LED / ID Setting
User Interface：Power LED, Work / Pass / Fail LEDs on each site
Communication：USB 2.0 High Speed
Power：100V AC~240V AC
Frequency Range：50/60Hz
Power Consumption：75W(Max)
Dimension：31.5cm x 24cm x 8cm (Socket and START Key are not included)
Weight：3.5Kg
Operating Altitude：up to 5000m
Operating Humidity：20％~70％ (non-condensing)
Temperature：+5℃ ~ +45℃
File Type Supported
File Type Supported
Binary、Intel HEX、Tek HEX、Motorola HEX、ASCII HEX , etc.
PC System Requirement
PC System Requirement
Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
Processor：Pentium 4 以上
Memory：1GB~2GB RAM and above
Hard Disk：500M Byte and above
Communication：USB2.0
Standard Accessories
Standard Accessories
Main unit x 1
USB cable x 1
AC power cord x 1
Adaptor screw x 18
Optional Accessories
Optional Accessories
TSOP, TSSOP, BGA, uBGA, VSOP, SOP, SSOP, PLCC, etc.
Page updated
Google Sites
Report abuse