SU-600 - Nand / Nor / SPI / MCU Device Programmer

Features

• Supports NAND Flash analysis function, able to find the bad block location and the relative size.

• Ultra high programming speed: 32M bits/sec.

• Supports NAND Flash Bad Block Management.

• Intelligent NAND Flash master reading, you can customized Bad Block Managing Settings.

• Auto-detect function for wrong insertion and bad connection of pins.

• USB high speed interface, able to connect 4 units SU-600 on the same PC for 4 site programming.

• Independent socket circuit design which increases the programming stability.

• Stand-alone industrial LED start button. The Pass, Fail and Work LEDs clearly show the programming situation.

• Provides device data used map analysis function. You can easily know the whole device data mapping.

• Provides mass production oriented software, included project operation, programming quantity control and yield statistics.

Specification

• User RAM：64 MBytes

• Button/Switch：START LED / ID Setting

• User Interface：Power LED, Work / Pass / Fail LEDs on each site

• Communication：USB 2.0

• Power：90V AC ~ 260V AC (Auto-Switching)

• Frequency Range：47/63Hz

• Power Consumption：24W(Max)

• Dimension：11.6cm x 24cm x 6cm (Socket and START Key are not included)

• Weight：1.5Kg

• Operating Altitude：up to 5000m

• Operating Humidity：20%~70% (non-condensing)

• Temperature：+5℃ ~ +45℃

File Type Supported

• Binary, Intel HEX, Tek HEX, Motorola HEX, ASCII HEX, etc.

PC System Requirement

• Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )

• CPU：Pentium 4 and above

• Memory：1GB~2GB RAM and above

• Hard Disk：500M Byte and above

• Communication：USB2.0

Standard Accessories

• Main unit x 1

• USB cable x 1

• AC power cord x 1

• Adaptor screw x 18

Optional Accessories

• TSOP, TSSOP, BGA, uBGA, VSOP, SOP, SSOP, PLCC, etc.