LP-2900 - FPGA Board Trainer Kit

Introduction

LP-2900 FPGA training kit offers full hardware units for you to experiment every function of the FPGA chip while learning the basic knowledge. CPLD and FPGA have been the first-choice components for the designers. It is suitable for the designers on application for communication, industrial automation, intelligent instrument, image processing, extensive engine control, etc. In order to allow users have excellent experimental platforms, LEAP series has provided platforms based on Altera or XILINX. Enabling engineers to realize the designs of logical circuit from experimental units.

Test Content

Combinational logic design, simulation and test

1. Basic logic

2. Subtractor

3. Decoder

4. Combinational logic

5. Comparator

6. Multiplexer

7. Adder

8. Encoder

9. Demultiplexer

Sequential logic circuit design, simulation and test

1. Flip-flop device

2. Shift register

3. Shift counter register

4. Synchronized counter

5. Asynchronous counter

Analog logic circuit design, simulation and test

1. A/D converter

2. D/A converter

Thematic Application Test

1. 8 × 8 dual color spot array LED control test.

2. Digital clock

3. Counter

4. Electronic alarm clock

5. Traffic light control

6. Electronic dice

7. Keyboard scan

8. LCD display control test

9. A/D, D/A converter test

10. Easy CPU design

11. VHDL/AHDL design

12. Matching 8051 thematic test

Specification

• Communication: USB or Printer Port

• Power: 100V AC~240V AC

• Frequency Range: 50/60 Hz

• Dimension: 32cm x 22.6cm x 3.0/8.5cm

• Weight: 3.5Kg

• Operating Altitude: up to 5000 m

• Operating Humidity: 90％ (non-condensing)

• Temperature: +5℃ ~ +45℃

Other Specifications

• Chip Supported:

  • ALTERA: FLEX10K30ATC144 (TQFP-144) / 5CEFA2 (FBGA-256)

  • XILINX: XC2S50 (PQFP-208)

• Signal Generation Unit:

• 1. Programmable frequency generator

  2. Standard frequency 1K/10K/ 100K/1M/10MHz

• Logic Input Switch:

• 1. 8 × 1 logic input original press point with light

  2. 8 × 2 logic input Dip switch

  3. 4 impulse press button generator (2 positive pulse; 2 negative pulse)

  4. 3 × 4 array keyboard

• Output Unit:

• 1. 8 × 8 dual color point array LED display

  2. LCD 16 × 2 monitor

  3. 6 digits 7 nodes monitor

  4. 3 × 4 LED output

  5. Buzzer output x 1 set

• Linear Unit:

• 1. 8bit D/A converter x 2 sets

  2. 8bit A/D converter x 1 set

• MPU unit:

  • 8051 and CPLD/FPGA match circuit test