Hubble Pinpoints Distant Galaxies in Deepest View of Universe
Farthest Galaxies are Within the Circles - About 13 Billion Light Years Distance
The Two Boxes in the Large Photo at Right are Magnified at Left

Hubble Pinpoints Distant Galaxies in Deepest View of Universe

                             THE ASTRONOMY PICTURE OF THE DAY 2009 May 25

See Explanation.  Clicking on the picture will download the highest resolution version available.

Hubble Floats Free
Credit: STS-125 Crew, NASA

Explanation: Why put observatories in space? Most telescopes are on the ground. On the ground, you can deploy a heavier telescope and fix it more easily. The trouble is that Earth-bound telescopes must look through the Earth's atmosphere. First, the Earth's atmosphere blocks out a broad range of the electromagnetic spectrum, allowing a narrow band of visible light to reach the surface. Telescopes which explore the Universe using light beyond the visible spectrum, such as those onboard the Chandra X-ray Observatory, and the Fermi Gamma Ray Space Telescope need to be carried above the absorbing atmosphere. Second, the Earth's atmosphere blurs the light it lets through. The blurring is caused by varying density and continual motion of air. By orbiting above the Earth's atmosphere, the Hubble Space Telescope, pictured above last week after being captured, refurbished, and released, can get clearer images. In fact, even though HST has a mirror 15 times smaller than large Earth-bound telescopes, it can still resolve finer details. A future large telescope for space, the James Webb Space Telescope is currently planned for launch in 2014.



See Explanation.  Clicking on the picture will download  the highest resolution version available.

M83's Center from Refurbished Hubble
Credit: NASA, ESA, and the Hubble Heritage Team (STScI/AURA); Acknowledgement: R. O'Connell (U. Virginia)

Explanation: What's happening at the center of spiral galaxy M83? Just about everything, from the looks of it. M83 is one of the closest spiral galaxies to our own Milky Way Galaxy and from a distance of 15 million light-years, appears to be relatively normal. Zooming in on M83's nucleus with the latest telescopes, however, shows the center to be an energetic and busy place. Visible in the above image -- from the newly installed Wide Field Camera 3 pointing through the recently refurbished Hubble Space Telescope -- are bright newly formed stars and giant lanes of dark dust. An image with similar perspective from the Chandra X-ray Observatory shows the region is also rich in very hot gas and small bright sources. The remnants of about 60 supernova blasts can be found in the above image .


See Explanation.  Clicking on the picture will download  the highest resolution version available.

The Butterfly Nebula from Upgraded Hubble (Since the STS-125 Mission)
Credit: NASA, ESA, and the Hubble SM4 ERO Team

Explanation: The bright clusters and nebulae of planet Earth's night sky are often named for flowers or insects, and NGC 6302 is no exception. With an estimated surface temperature of about 250,000 degrees C, the central star of this particular planetary nebula is exceptionally hot though -- shining brightly in ultraviolet light but hidden from direct view by a dense torus of dust. Above is a dramatically detailed close-up of the dying star's nebula recorded by the newly upgraded Hubble Space Telescope. Cutting across a bright cavity of ionized gas, the dust torus surrounding the central star is in the upper right corner of this view, nearly edge-on to the line-of-sight. Molecular hydrogen has recently been detected in this hot star's dusty cosmic shroud. NGC 6302 lies about 4,000 light-years away in the arachnologically correct constellation Scorpius.


See Explanation.  Clicking on the picture will download  the highest resolution version available.

The Center of Globular Cluster Omega Centauri
Credit: NASA, ESA, and the Hubble SM4 ERO Team

Explanation: What is left over after stars collide? To help answer this question, astronomers have been studying the center of the most massive ball of stars in our Milky Way Galaxy. In the center of globular cluster Omega Centauri, stars are packed in 10,000 times more densely than near our Sun. Pictured above, the newly upgraded Hubble Space Telescope has resolved the very center of Omega Centauri into individual stars. Visible are many faint yellow-white stars that are smaller than our Sun, several yellow-orange stars that are Red Giants, and an occasional blue star. When two stars collide they likely either combine to form one more massive star, or they stick, forming a new binary star system. Close binary stars interact, sometimes emitting ultraviolet or X-ray light when gas falls from one star onto the surface of a compact companion such as a white dwarf or neutron star. Two such binaries have now been located in Omega Centauri's center. The star cluster lies about 15,000 light-years away and is visible toward the constellation of Centaurus.


September 9th, 2009 Article Below is from

Just How Good is the "New" Hubble? Let's Compare

Written by Nancy Atkinson

Hubble images of the Omega Centauri starfield from 2002, left, and from 2009, right.

Hubble images of the Omega Centauri starfield from 2002, left, and from 2009, right.

"This marks a new beginning for Hubble," said Ed Weiler, associate administrator for NASA's Science Mission Directorate at today's press briefing at NASA Headquarters to showcase the images from Hubble following Servicing Mission 4. "The telescope was given an extreme makeover and is now significantly more powerful than ever — well equipped to last well into the next decade."

But how much more powerful is Hubble? Are there any discernible differences between the old images from Hubble and the new ones released today? You better believe it. Above is the star field of Omega Centauri before (2002) and after (2009).

See more comparisons below.

Butterfly Nebula before and after.  Credit: NASA/Hubble team. Collage by Stuart Atkinson

Butterfly Nebula before and after.STS-125 Mission Credit: NASA/Hubble team. Collage by Stuart Atkinson

Here's an earlier image of the Butterfly Nebula (NGC 6302, or the Bug Nebula) with the one released todaySept 9.
 (Thanks to Stu Atkinson for the comparison image.)

Scientists at today's briefing said the new instruments are more sensitive to light and therefore will significantly improve Hubble’s observing efficiency. The Space Telescope is now able to complete observations in a fraction of the time that was needed with earlier generations of Hubble instruments.

Stephan's Quintet from 2000 (left) and 2009 (right)  Credit:  NASA/ESA Hubble Team

Stephan's Quintet from 2000 (left) and 2009 (right) Credit: NASA/ESA Hubble Team

Filed under: Hubble

The image “” cannot be displayed, because it contains errors.

Carina Nebula Above

Stars Bursting to Life in Chaotic Carina Nebula

These two images above of a huge pillar of star birth demonstrate how observations taken in visible and in infrared light by NASA's Hubble Space Telescope reveal dramatically different and complementary views of an object.

The pictures demonstrate one example of the broad wavelength range of the new Wide Field Camera 3 (WFC3) aboard the Hubble telescope, extending from ultraviolet to visible to infrared light.

Composed of gas and dust, the pillar resides in a tempestuous stellar nursery called the Carina Nebula, located 7,500 light-years away in the southern constellation Carina. The pair of images shows that astronomers are given a much more complete view of the pillar and its contents when distinct details not seen at visible wavelengths are uncovered in near-infrared light.

The top image, taken in visible light, shows the top of the 3-light-year-long pillar, bathed in the glow of light from hot, massive stars off the top of the image. Scorching radiation and fast winds (streams of charged particles) from these stars are sculpting the pillar and causing new stars to form within it. Streamers of gas and dust can be seen flowing off the top of the structure.

Nestled inside this dense structure are fledgling stars. They cannot be seen in this image because they are hidden by a wall of gas and dust. Although the stars themselves are invisible, one of them is providing evidence of its existence. Thin puffs of material can be seen traveling to the left and to the right of a dark notch in the center of the pillar. The matter is part of a jet produced by a young star. Farther away, on the left, the jet is visible as a grouping of small, wispy clouds. A few small clouds are visible at a similar distance on the right side of the jet. Astronomers estimate that the jet is moving at speeds of up to 850,000 miles an hour. The jet's total length is more than 15 light-years.

In the image at bottom, taken in infrared light, the dense column and the surrounding greenish-colored gas all but disappear. Only a faint outline of the pillar remains. By penetrating the wall of gas and dust, the infrared vision of WFC3 reveals the infant star that is probably blasting the jet. Part of the jet nearest the star is more prominent in this view. These features can be seen because infrared light, unlike visible light, can pass through the dust.

Other infant stars inside the pillar also appear to emerge. Three examples are the bright star almost directly below the jet-producing star, a fainter one to its right, and a pair of stars at the top of the pillar. Winds and radiation from some of the stars are blowing away gas from their neighborhoods, carving out large cavities that appear as faint dark holes.

Surrounding the stellar nursery is a treasure chest full of stars, most of which cannot be seen in the visible-light image because dense gas clouds veil their light. Many of them are background stars.

Hubble's Wide Field Camera 3 observed the Carina Nebula July 24 through July 30, 2009. WFC3 was installed aboard Hubble in May 2009 during Servicing Mission 4. The composite image was made from filters that isolate emission from iron, magnesium, oxygen, hydrogen, and sulfur.

These Hubble observations of the Carina Nebula are part of the Hubble Servicing Mission 4 Early Release Observations. (Sept 9)

Credit: NASA, ESA, and the Hubble SM4 ERO Team

Fair       AverageGood

Hubble Space Telescope Captures Rare Jupiter Collision
This Hubble picture, taken on July 23, by the new Wide Field Camera 3, is the sharpest visible-light picture taken of the atmospheric debris from a comet or asteroid that collided with Jupiter on July 19. This is Hubble's first science observation following its repair and upgrade in May. The size of the impactor is estimated to be as large as several football fields.
Image Credit: NASA, ESA, and H. Hammel (Space Science Institute, Boulder, Colo.), and the Jupiter Impact Team

View Larger Image

NASA's Hubble Space Telescope has taken the sharpest visible-light picture yet of atmospheric debris from an object that collided with Jupiter on July 19. NASA scientists decided to interrupt the recently refurbished observatory's checkout and calibration to take the image of a new, expanding spot on the giant planet on July 23.

Discovered by Australian amateur astronomer Anthony Wesley, the spot was created when a small comet or asteroid plunged into Jupiter's atmosphere and disintegrated. The only other time such a feature has been seen on Jupiter was 15 years ago after the collision of fragments from comet Shoemaker-Levy 9.

"Because we believe this magnitude of impact is rare, we are very fortunate to see it with Hubble," said Amy Simon-Miller of NASA's Goddard Space Flight Center in Greenbelt, Md. "Details seen in the Hubble view shows a lumpiness to the debris plume caused by turbulence in Jupiter's atmosphere."

The new Hubble images also confirm that a May servicing visit by space shuttle astronauts was a big success.

"This image of the impact on Jupiter is fantastic," said U.S. Sen. Barbara A. Mikulski, D-Md., chairwoman of the Commerce, Justice and Science Appropriations Subcommittee. "It tells us that our astronauts and the ground crew at the Goddard Space Flight Center successfully repaired the Hubble telescope. I'm so proud of them and I can't wait to see what's next from Hubble."

For the past several days, Earth-based telescopes have been trained on Jupiter. To capture the unfolding drama 360 million miles away, Matt Mountain, director of the Space Telescope Science Institute in Baltimore, gave observation time to a team of astronomers led by Heidi Hammel of the Space Science Institute in Boulder, Colo.

"Hubble's truly exquisite imaging capability has revealed an astonishing wealth of detail in the impact site," Hammel said. "By combining these images with our ground-based data at other wavelengths, our Hubble data will allow a comprehensive understanding of exactly what is happening to the impact debris."

Simon-Miller estimated the diameter of the impacting object was the size of several football fields. The force of the explosion on Jupiter was thousands of times more powerful than the suspected comet or asteroid that exploded over the Siberian Tunguska River Valley in June 1908.

The image was taken with the Wide Field Camera 3. The new camera, installed by the astronauts aboard space shuttle Atlantis in May, is not yet fully calibrated. While it is possible to obtain celestial images, the camera's full power has yet to be seen.

"This is just one example of what Hubble's new, state-of-the-art camera can do, thanks to the STS-125 astronauts and the entire Hubble team," said Ed Weiler, associate administrator of NASA's Science Mission Directorate in Washington. "However, the best is yet to come."


Servicing Mission Observatory Verification (SMOV) Update
2009 July 20
During Servicing Mission 4, astronauts replaced many key parts — batteries and gyroscopes, for example — that affect the spacecraft component of the Hubble Space Telescope. Testing and calibration for the spacecraft itself is now complete, and that aspect of Hubble is in excellent shape.
  • Hubble is now functioning with three of its six new gyroscopes. As planned, the other three have been turned off to keep in reserve.
  • Hubble's new batteries are performing as expected, with more charging capacity than the ones they replaced.
  • The new thermal panels are functioning as anticipated, keeping equipment Bays 5, 7, and 8 at their expected temperatures.

Testing and calibration continues on the science components.
  • The Science Instrument Command and Data Handling Unit (SIC&DH) has been turned on again after its June electronic malfunction, and is functioning normally. The problem has not recurred. Engineers continue to monitor the SIC&DH.
  • All instruments contain a number of channels, which detect and processes different wavelengths. Wide Field Camera 3 is now aligned and focused in both of its channels, and is undergoing calibration.
  • Scientists and engineers have nearly finished aligning the Cosmic Origins Spectrograph (COS). When an instrument enters space, weightlessness can cause it to go out of alignment. Engineers adjust the instrument from the ground, controlling tiny mirrors inside the instrument. One channel is fully aligned, and the other's alignment should be completed over the next few days. COS's other planned calibrations, typically involving internal measurements of the instrument, are going well. The COS far-UV channel successfully conducted its first external observation this week in preparation for the alignment process.
  • The Space Telescope Imaging Spectrograph has been suspended due to a memory anomaly. Engineers are working on the problem.
  • The Advanced Camera for Surveys (ACS) has completed all testing, alignment and calibration activities and is taking science observations. Two of the instrument's channels — one seeing ultraviolet light, the other visible light — are functioning very well. The third, a high-resolution channel that, for example, takes pictures of the central regions of galaxies, could not be restored during the servicing mission. This channel was thought to have a 50-50 chance of being brought back online, so the result is not unexpected. The return of the visible light channel, responsible for many of ACS's famous images, is a particular triumph.
Space Telescope Science Institute (STScI)
Baltimore, MD

Hubble Space Telescope

From Wikipedia, the free encyclopedia


Hubble Space Telescope
The image “” cannot be displayed, because it contains errors.
The Hubble Space Telescope as seen from the departing Space Shuttle Atlantis, flying Servicing Mission 4 (STS-125), the fifth and final human spaceflight to the observatory. Photo taken on 2009 May 19 on the STS-125 HST Servicing Mission.
General Information
NSSDC ID 1990-037B
Organization NASA / ESA / STScI
Launch Date  1990 April 24
Mission length 19 years, 4 months 16 days elapsed as of 2009 Sept 9
Deorbited ~ 2013–2021[1][2]
Mass 11,110 kg (24,500 lb)
Type of orbit Near-circular low Earth orbit
Orbit height 559 km (347 mi)
Orbit period 96–97 minutes
Orbit velocity 7,500 m/s (25,000 ft/s)
Acceleration due to gravity 8.169 m/s2 (26.80 ft/s2)
Location Low Earth orbit
Telescope style Ritchey-Chretien reflector
Wavelength Optical, ultraviolet, near-infrared
Diameter 2.4 m (7 ft 10 in)
Collecting area 4.5 m2 (48 sq ft)[3]
Focal length 57.6 m (189 ft)
NICMOS infrared camera/spectrometer
ACS optical survey camera
(partially failed)
WFC3 wide field optical camera
COS ultraviolet spectrograph
STIS optical spectrometer/camera
FGS three fine guidance sensors

The Hubble Space Telescope (HST) is a space telescope that was carried into orbit by the space shuttle in April 1990. It is named after the American astronomer Edwin Hubble. Although not the first space telescope, the Hubble is one of the largest and most versatile, and is well-known as both a vital research tool and a public relations boon for astronomy. The HST is a collaboration between NASA and the European Space Agency, and is one of NASA's Great Observatories, along with the Compton Gamma Ray Observatory, the Chandra X-ray Observatory, and the Spitzer Space Telescope.[4]

Space telescopes were proposed as early as 1923. The Hubble was funded in the 1970s, with a proposed launch in 1983, but the project was beset by technical delays, budget problems, and the Challenger disaster. When finally launched in 1990, scientists found that the main mirror had been ground incorrectly, severely compromising the telescope's capabilities. However, after a servicing mission in 1993, the telescope was restored to its intended quality. Hubble's orbit outside the distortion of Earth's atmosphere allows it to take extremely sharp images with almost no background light. Hubble's Ultra Deep Field image, for instance, is the most detailed visible-light image ever made of the universe's most distant objects. Many Hubble observations have led to breakthroughs in astrophysics, such as accurately determining the rate of expansion of the universe.

The Hubble is the only telescope ever designed to be serviced in space by astronauts. There have been five servicing missions, the last ocurring in May 2009. Servicing Mission 1 took place in December 1993 when Hubble's imaging flaw was corrected. Servicing missions 2, 3A, and 3B repaired various sub-systems and replaced many of the observing instruments with more modern and capable versions. However, following the 2003 Space Shuttle Columbia accident, the fifth servicing mission was canceled on safety grounds. After spirited public discussion, NASA reconsidered this decision, and administrator Mike Griffin approved one final Hubble servicing mission. STS-125 was launched in May 2009, and installed two new instruments and made numerous repairs. Assuming testing and calibration of the new equipment goes well, the Hubble should resume routine operation in September 2009.

The latest servicing should allow the telescope to function until at least 2014, when its successor, the James Webb Space Telescope (JWST), is due to be launched. The JWST will be far superior to Hubble for many astronomical research programs, but will only observe in infrared, so it will complement (not replace) Hubble's ability to observe in the visible and ultraviolet parts of the spectrum.



  Conception, Design and Aims

  Proposals and Precursors

In 1923, German scientist Hermann Oberth, considered—along with Robert Goddard and Konstantin Tsiolkovsky—one of the three fathers of modern rocketry, published Die Rakete zu den Planetenräumen ("The Rocket into Planetary Space"), which mentioned how a telescope could be propelled into Earth orbit by a rocket.[5]

The image “” cannot be displayed, because it contains errors.
Lyman Spitzer,  "Father" of the Space Telescope

The history of the Hubble Space Telescope can be traced back as far as 1946, when the astronomer Lyman Spitzer wrote the paper "Astronomical advantages of an extraterrestrial observatory".[6] In it, he discussed the two main advantages that a space-based observatory would have over ground-based telescopes. First, the angular resolution (smallest separation at which objects can be clearly distinguished) would be limited only by diffraction, rather than by the turbulence in the atmosphere, which causes stars to twinkle and is known to astronomers as seeing. At that time ground-based telescopes were limited to resolutions of 0.5–1.0 arcseconds, compared to a theoretical diffraction-limited resolution of about 0.05 arcsec for a telescope with a mirror 2.5 m in diameter. Second, a space-based telescope could observe infrared and ultraviolet light, which are strongly absorbed by the atmosphere.

Spitzer devoted much of his career to pushing for a space telescope to be developed. In 1962 a report by the United States National Academy of Sciences recommended the development of a space telescope as part of the space program, and in 1965 Spitzer was appointed as head of a committee given the task of defining the scientific objectives for a large space telescope.[7]

Space-based astronomy had begun on a very small scale following World War II, as scientists made use of developments that had taken place in rocket technology. The first ultraviolet spectrum of the Sun was obtained in 1946,[8] and NASA launched the Orbiting Solar Observatory to obtain UV, X-ray, and gamma-ray spectra in 1962.[9] An orbiting solar telescope was launched in 1962 by the United Kingdom as part of the Ariel space program, and in 1966 National Aeronautics and Space Administration (NASA) launched the first Orbiting Astronomical Observatory (OAO) mission. OAO-1's battery failed after three days, terminating the mission. It was followed by OAO-2, which carried out ultraviolet observations of stars and galaxies from its launch in 1968 until 1972, well beyond its original planned lifetime of one year.[10]

The OSO and OAO missions demonstrated the important role space-based observations could play in astronomy, and 1968 saw the development by NASA of firm plans for a space-based reflecting telescope with a mirror 3 m in diameter, known provisionally as the Large Orbiting Telescope or Large Space Telescope (LST), with a launch slated for 1979. These plans emphasized the need for manned maintenance missions to the telescope to ensure such a costly program had a lengthy working life, and the concurrent development of plans for the reusable space shuttle indicated that the technology to allow this was soon to become available.[11]

  Quest for Funding

The continuing success of the OAO program encouraged increasingly strong consensus within the astronomical community that the LST should be a major goal. In 1970 NASA established two committees, one to plan the engineering side of the space telescope project, and the other to determine the scientific goals of the mission. Once these had been established, the next hurdle for NASA was to obtain funding for the instrument, which would be far more costly than any Earth-based telescope. The US Congress questioned many aspects of the proposed budget for the telescope and forced cuts in the budget for the planning stages, which at the time consisted of very detailed studies of potential instruments and hardware for the telescope. In 1974, public spending cuts instigated by Gerald Ford led to Congress cutting all funding for the telescope project.[12]

In response to this, a nationwide lobbying effort was coordinated among astronomers. Many astronomers met congressmen and senators in person, and large scale letter-writing campaigns were organized. The National Academy of Sciences published a report emphasizing the need for a space telescope, and eventually the Senate agreed to half of the budget that had originally been approved by Congress.[13]

The funding issues led to something of a reduction in the scale of the project, with the proposed mirror diameter reduced from 3 m to 2.4 m, both to cut costs and to allow a more compact and effective configuration for the telescope hardware. A proposed precursor 1.5 m space telescope to test the systems to be used on the main satellite was dropped, and budgetary concerns also prompted collaboration with the European Space Agency. ESA agreed to provide funding and supply one of the first generation instruments for the telescope, as well as the solar cells that would power it, and staff to work on the telescope in the United States, in return for European astronomers being guaranteed at least 15% of the observing time on the telescope.[14] Congress eventually approved funding of US$36,000,000 for 1978, and the design of the LST began in earnest, aiming for a launch date of 1983.[13] In 1983 the telescope was named[15] after Edwin Hubble, who made one of the greatest scientific breakthroughs of the 20th century when he discovered that the universe was expanding.[16]

  Construction and Engineering

Polishing of Hubble's primary mirror begins at Perkin-Elmer corporation, Danbury, Connecticut, May 1979. The engineer pictured is Dr. Martin Yellin, an optical engineer working for Perkin-Elmer on the project.

Once the Space Telescope project had been given the go-ahead, work on the program was divided among many institutions. Marshall Space Flight Center (MSFC) was given responsibility for the design, development, and construction of the telescope, while the Goddard Space Flight Center was given overall control of the scientific instruments and ground-control center for the mission.[17] MSFC commissioned the optics company Perkin-Elmer to design and build the Optical Telescope Assembly (OTA) and Fine Guidance Sensors for the space telescope. Lockheed was commissioned to construct the spacecraft in which the telescope would be housed.[18]

  Optical Telescope Assembly (OTA)

Optically, the Hubble is a Cassegrain reflector of Ritchey-Chrétien design, as are most large professional telescopes. This design, with two hyperbolic mirrors, is known for good imaging performance over a wide field of view, with the disadvantage that the mirrors have shapes that are hard to fabricate and test. The mirror and optical systems of the telescope determine the final performance, and they were designed to exacting specifications. Optical telescopes typically have mirrors polished to an accuracy of about a tenth of the wavelength of visible light, but the Space Telescope was to be used for observations into the ultraviolet (shorter wavelengths) and was specified to be diffraction limited to take full advantage of the space environment. Therefore its mirror needed to be polished to an accuracy of 10 nanometres, or about 1/65 of the wavelength of red light.[19]

Perkin-Elmer intended to use custom-built and extremely sophisticated computer-controlled polishing machines to grind the mirror to the required shape.[18] However, in case their cutting-edge technology ran into difficulties, NASA demanded that PE sub-contract to Kodak to construct a back-up mirror using traditional mirror-polishing techniques.[20] (The team of Kodak and Itek also bid on the original mirror polishing work. Their bid called for the two companies to double-check each other's work, which would have almost certainly caught the polishing error that later caused such problems.[21]) The Kodak mirror is now on permanent display at the Smithsonian Institution.[22] An Itek mirror built as part of the effort is now used in the 2.4 m telescope at the Magdalena Ridge Observatory.[23]

Construction of the Perkin-Elmer mirror began in 1979, starting with a blank manufactured by Corning from their ultra-low expansion glass. To keep the mirror's weight to a minimum it consisted of inch-thick top and bottom plates sandwiching a honeycomb lattice. Perkin-Elmer simulated microgravity by supporting the mirror on both sides with 138 rods that exerted varying amounts of force. This ensured that the mirror's final shape would be correct and to specification when finally deployed. Mirror polishing continued until May 1981. NASA reports at the time questioned Perkin-Elmer's managerial structure, and the polishing began to slip behind schedule and over budget. To save money, NASA halted work on the back-up mirror and put the launch date of the telescope back to October 1984.[24] The mirror was completed by the end of 1981; it was washed using 2,400 gallons of hot, deionized water and then received a reflective coating of aluminium 65 nm-thick and a protective coating of magnesium fluoride 25 nm-thick.[25][26]

Construction of Hubble. The optical metering truss and secondary baffle are visible.

Doubts continued to be expressed about Perkin-Elmer's competence on a project of this importance as their budget and timescale for producing the rest of the OTA continued to inflate. In response to a schedule described as "unsettled and changing daily", NASA postponed the launch date of the telescope until April 1985. Perkin-Elmer's schedules continued to slip at a rate of about one month per quarter, and at times delays reached one day for each day of work. NASA was forced to postpone the launch date until first March and then September 1986. By this time the total project budget had risen to US$1.175 billion.[27]

  Spacecraft Systems

The spacecraft in which the telescope and instruments were to be housed was another major engineering challenge. It would have to adequately withstand frequent passages from direct sunlight into the darkness of Earth's shadow, which would generate major changes in temperature, while being stable enough to allow extremely accurate pointing of the telescope. A shroud of multi-layer insulation keeps the temperature within the telescope stable, and surrounds a light aluminum shell in which the telescope and instruments sit. Within the shell, a graphite-epoxy frame keeps the working parts of the telescope firmly aligned.[28] Because graphite composites are hygroscopic, there was a risk that water vapor absorbed by the truss while in Lockheed's clean room would later be expressed in the vacuum of space; the telescope's instruments would be covered in ice. To reduce that risk, a nitrogen gas purge was performed prior to launching the telescope into space.[29]

Exploded view of the Hubble Telescope.

While construction of the spacecraft in which the telescope and instruments would be housed proceeded somewhat more smoothly than the construction of the OTA, Lockheed still experienced some budget and schedule slippage, and by the summer of 1985, construction of the spacecraft was 30% over budget and three months behind schedule. An MSFC report said that Lockheed tended to rely on NASA directions rather than take their own initiative in the construction.[30]

  Initial Instruments

When launched, the HST carried five scientific instruments: the Wide Field and Planetary Camera (WF/PC), Goddard High Resolution Spectrograph (GHRS), High Speed Photometer (HSP), Faint Object Camera (FOC) and the Faint Object Spectrograph (FOS). WF/PC was a high-resolution imaging device primarily intended for optical observations. It was built by NASA's Jet Propulsion Laboratory, and incorporated a set of 48 filters isolating spectral lines of particular astrophysical interest. The instrument contained eight CCD chips divided between two cameras, each using four CCDs. The "wide field camera" (WFC) covered a large angular field at the expense of resolution, while the "planetary camera" (PC) took images at a longer effective focal length than the WF chips, giving it a greater magnification.

The GHRS was a spectrograph designed to operate in the ultraviolet. It was built by the Goddard Space Flight Center and could achieve a spectral resolution of 90,000.[31] Also optimized for ultraviolet observations were the FOC and FOS, which were capable of the highest spatial resolution of any instruments on Hubble. Rather than CCDs these three instruments used photon-counting digicons as their detectors. FOC was constructed by ESA, while the Martin Marietta corporation built the FOS.

The final instrument was the HSP, designed and built at the University of Wisconsin–Madison. It was optimized for visible and ultraviolet light observations of variable stars and other astronomical objects varying in brightness. It could take up to 100,000 measurements per second with a photometric accuracy of about 2% or better.[32]

HST's guidance system can also be used as a scientific instrument. Its three Fine Guidance Sensors (FGS) are primarily used to keep the telescope accurately pointed during an observation, but can also be used to carry out extremely accurate astrometry; measurements accurate to within 0.0003 arcseconds have been achieved.[33]

  Ground Support

Hubble's low orbit means many targets are visible for somewhat less than half of elapsed time, since they are blocked from view by the Earth for one-half of each orbit.

The Space Telescope Science Institute (STScI) is responsible for the scientific operation of the telescope and delivery of data products to astronomers. STScI is operated by the Association of Universities for Research in Astronomy (AURA) and is physically located in Baltimore, Maryland on the Homewood campus of Johns Hopkins University, one of the 33 US universities and 7 international affiliates that make up the AURA consortium. STScI was established in 1983 after something of a power struggle between NASA and the scientific community at large. NASA had wanted to keep this function "in-house", but scientists wanted it to be based in an academic establishment.[34][35] The Space Telescope European Coordinating Facility (ST-ECF), established at Garching bei München near Munich in 1984, provides similar support for European astronomers.

One rather complex task that falls to STScI is scheduling observations for the telescope.[36] Hubble is situated in a low-Earth orbit so that it can be reached by the space shuttle for servicing missions, but this means that most astronomical targets are occulted by the Earth for slightly less than half of each orbit. Observations cannot take place when the telescope passes through the South Atlantic Anomaly due to elevated radiation levels, and there are also sizable exclusion zones around the Sun (precluding observations of Mercury), Moon and Earth. The solar avoidance angle is about 50°, which is specified to keep sunlight from illuminating any part of the OTA. Earth and Moon avoidance is to keep bright light out of the FGSs and to keep scattered light from entering the instruments. If the FGSs are turned off, however, the Moon and Earth can be observed. Earth observations were used very early in the program to generate flat-fields for the WFPC1 instrument. There is a so-called continuous viewing zone (CVZ), at roughly 90 degrees to the plane of Hubble's orbit, in which targets are not occulted for long periods. Due to the precession of the orbit, the location of the CVZ moves slowly over a period of eight weeks. Because the limb of the Earth is always within about 30° of regions within the CVZ, the brightness of scattered earthshine may be elevated for long periods during CVZ observations.

Because Hubble orbits in the upper atmosphere, its orbit changes over time in a way that is not accurately predictable. The density of the upper atmosphere varies according to many factors, and this means that Hubble's predicted position for six weeks' time could be in error by up to 4,000 km. Observation schedules are typically finalized only a few days in advance, as a longer lead time would mean there was a chance that the target would be unobservable by the time it was due to be observed.[37]

Engineering support for the Hubble is provided by NASA and contractor personnel at the Goddard Space Flight Center in Greenbelt, Maryland, 48 km south of the STScI. Hubble's operation is monitored 24 hours per day by four teams of flight controllers who make up Hubble's Flight Operations Team.[38]

  Challenger Disaster, Delays, and Eventual Launch

In early 1986, the planned launch date of October that year looked feasible, but the Challenger accident brought the U.S. space program to a halt, grounding the space shuttle fleet and forcing the launch of Hubble to be postponed for several years. The telescope had to be kept in a clean room, powered up and purged with nitrogen, until a launch could be rescheduled. This costly situation (about $6 million per month) pushed the overall costs of the project even higher. On the other hand, engineers used this time to perform extensive tests, swap out a possible failure-prone battery, and make other improvements.[39] Furthermore, the ground software needed to control Hubble was not ready in 1986, and in fact was barely ready by the 1990 launch.[40]

Eventually, following the resumption of shuttle flights in 1988, the launch of the telescope was scheduled for 1990. On 24 April 1990, shuttle mission STS-31 saw Discovery launch the telescope successfully into its planned orbit.[41]

From its original total cost estimate of about US$400 million, the telescope had by now cost over $2.5 billion to construct. Hubble's cumulative costs up to this day are estimated to be several times higher still, with US expenditure estimated at between $4.5 and $6 billion, and Europe's financial contribution at €593 million (1999 estimate).[42]

  Flawed Mirror

Shuttle mission STS-31 lifts off, carrying Hubble into orbit.

Within weeks of the launch of the telescope, the images returned showed that there was a serious problem with the optical system. Although the first images appeared to be sharper than ground-based images, the telescope failed to achieve a final sharp focus, and the best image quality obtained was drastically lower than expected. Images of point sources spread out over a radius of more than one arcsecond, instead of having a point spread function concentrated within a circle 0.1 arcsec in diameter as had been specified in the design criteria.[43] The detailed performance is shown in graphs from STScI illustrating the mis-figured PSFs compared to post-correction and ground based PSFs.[44]

Analysis of the flawed images showed that the cause of the problem was that the primary mirror had been ground to the wrong shape. Although it was probably the most precisely figured mirror ever made, with variations from the prescribed curve of no more than 1/65 of the wavelength of visible light, it was too flat at the edges. The mirror was barely 2.3 micrometres out from the required shape, but the difference was catastrophic, introducing severe spherical aberration, a flaw in which light reflecting off the edge of a mirror focuses on a different point from the light reflecting off its center.[45]

The effect of the mirror flaw on scientific observations depended on the particular observation—the core of the aberrated PSF was sharp enough to permit high-resolution observations of bright objects, and spectroscopy was largely unaffected. However, the loss of light to the large, out of focus halo severely reduced the usefulness of the telescope for faint objects or high contrast imaging. This meant that nearly all of the cosmological programs were essentially impossible since they required observation of exceptionally faint objects.[45] NASA and the telescope became the butt of many jokes, and the project was popularly regarded as a white elephant. (For instance, in the movie The Naked Gun 2½: The Smell of Fear, the Hubble was pictured with the Titanic, the Hindenburg, and the Edsel).[46] Nonetheless, during the first three years of the Hubble mission, before the optical corrections, the telescope still carried out a large number of productive observations. The error was well characterized and stable, enabling astronomers to optimize the results obtained using sophisticated image processing techniques such as deconvolution.[47]

 Origin of the Problem

An extract from a WF/PC image shows the light from a star spread over a wide area instead of being concentrated on a few pixels.

A commission headed by Lew Allen, director of the Jet Propulsion Laboratory, was established to determine how the error could have arisen. The Allen Commission found that the main null corrector, a device used to measure the exact shape of the mirror, had been incorrectly assembled—one lens was wrongly spaced by 1.3 mm.[48] During the polishing of the mirror, Perkin-Elmer had analyzed its surface with two other null correctors, both of which (correctly) indicated that the mirror was suffering from spherical aberration. The company ignored these test results as it believed that the two null correctors were less accurate than the primary device that was reporting that the mirror was perfectly figured.[49]

The commission blamed the failings primarily on Perkin-Elmer. Relations between NASA and the optics company had been severely strained during the telescope construction due to frequent schedule slippage and cost overruns. NASA found that Perkin-Elmer did not review or supervise the mirror construction adequately, did not assign its best optical scientists to the project (as it had for the prototype), and in particular did not involve the optical designers in the construction and verification of the mirror. While the commission heavily criticized Perkin-Elmer for these managerial failings, NASA was also criticized for not picking up on the quality control shortcomings such as relying totally on test results from a single instrument.[50]

  Design of a Solution

The correctly ground backup mirror built by Eastman Kodak for the Hubble space telescope (the mirror was never coated with a reflective surface, hence its inner support structure can be seen). It now resides in the National Air and Space Museum in Washington, DC.[51]

The design of the telescope had always incorporated servicing missions, and astronomers immediately began to seek potential solutions to the problem that could be applied at the first servicing mission, scheduled for 1993. While Kodak and Itek had each ground back-up mirrors for Hubble, it would have been impossible to replace the mirror in orbit, and too expensive and time-consuming to bring the telescope temporarily back to Earth for a refit. Instead, the fact that the mirror had been ground so precisely to the wrong shape led to the design of new optical components with exactly the same error but in the opposite sense, to be added to the telescope at the servicing mission, effectively acting as "spectacles" to correct the spherical aberration.[52]

The first step was a precise characterization of the error in the main mirror. Working backwards from images of point sources, astronomers determined that the conic constant of the mirror was −1.01324, instead of the intended −1.00230.[53] The same number was also derived by analyzing the null corrector used by Perkin-Elmer to figure the mirror, as well as by analyzing interferograms obtained during ground testing of the mirror.

Because of the way the Hubble's instruments were designed, two different sets of correctors were required. The design of the Wide Field and Planetary Camera 2, already planned to replace the existing WF/PC, included relay mirrors to direct light onto the eight separate CCD chips making up its two cameras. An inverse error built into their surfaces could completely cancel the aberration of the primary. However, the other instruments lacked any intermediate surfaces that could be figured in this way, and so required an external correction device.[54]

The system designed to correct the spherical aberration for light focused at the FOC, FOS, and GHRS was called the "Corrective Optics Space Telescope Axial Replacement" (COSTAR) and consisted essentially of two mirrors in the light path, one of which would be figured to correct the aberration.[55] To fit the COSTAR system onto the telescope, one of the other instruments had to be removed, and astronomers selected the High Speed Photometer to be sacrificed.[54]

By 2002 all of the original instruments requiring COSTAR had been replaced by instruments with their own corrective optics, rendering it redundant; COSTAR was removed and returned to Earth in 2009, its space taken by the Cosmic Origins Spectrograph.

  Servicing Missions and New Instruments

 Servicing Mission 1

Astronauts installing corrective optics during SM1
Astronauts installing corrective optics during SM1

The image “” cannot be displayed, because it contains errors.
Improvement in Hubble images after SM1 of Galaxy M103

Astronauts replacing gyroscopes during SM3A
Astronauts replacing gyroscopes during SM3A
Hubble on the payload bay just prior to release during SM3B
Hubble on the payload bay just prior to release during SM3B
Main Article: STS-61

The telescope had always been designed so that it could be regularly serviced, but after the problems with the mirror came to light, the first servicing mission assumed a much greater importance, as the astronauts would have to carry out extensive work on the telescope to install the corrective optics. The seven astronauts selected for the mission were trained intensively in the use of the hundred or more specialized tools that would need to be used.[56] The Space Shuttle Endeavour mission STS-61 took place in December 1993, and involved installation of several instruments and other equipment over a total of 10 days.

Most importantly, the High Speed Photometer was replaced with the COSTAR corrective optics package, and WFPC was replaced with the Wide Field and Planetary Camera 2 (WFPC2) with its internal optical correction system. In addition, the solar arrays and their drive electronics were replaced, as well as four of the gyroscopes used in the telescope pointing system, two electrical control units and other electrical components, and two magnetometers. The onboard computers were upgraded, and finally, the telescope's orbit was boosted, to compensate for the orbital decay from 3 years of drag in the tenuous upper atmosphere.[57]

On January 13, 1994, NASA declared the mission a complete success and showed the first of many much sharper images.[58] The mission had been one of the most complex ever undertaken, involving five lengthy periods of extravehicular activity, and its resounding success was an enormous boon for NASA, as well as for the astronomers who now had a fully capable space telescope.

  Servicing Mission 2

Main article: STS-82

Servicing Mission 2, flown by Discovery (STS-82) in February 1997, replaced the GHRS and the FOS with the Space Telescope Imaging Spectrograph (STIS) and the Near Infrared Camera and Multi-Object Spectrometer (NICMOS), replaced an Engineering and Science Tape Recorder with a new Solid State Recorder, repaired thermal insulation and again boosted Hubble's orbit.[59] NICMOS contained a heat sink of solid nitrogen to reduce the thermal noise from the instrument, but shortly after it was installed, an unexpected thermal expansion resulted in part of the heat sink coming into contact with an optical baffle. This led to an increased warming rate for the instrument and reduced its original expected lifetime of 4.5 years to about 2 years.[60]

Servicing Mission 3A

Main article: STS-103

Servicing Mission 3A flown by Discovery (STS-103), took place in December 1999, and was a split-off from Servicing Mission 3 after three of the six onboard gyroscopes had failed. (A fourth failed a few weeks before the mission, rendering the telescope incapable of performing science observations.) The mission replaced all six gyroscopes, replaced a Fine Guidance Sensor and the computer, installed a Voltage/temperature Improvement Kit (VIK) to prevent battery overcharging, and replaced thermal insulation blankets.[61] Although the new computer is hardly a powerhouse (a 25 MHz radiation hardened Intel 486 with two megabytes of RAM), it is still 20 times faster, with six times more memory, than the DF-224 it replaced. The new computer increases throughput by moving some computing tasks from the ground to the spacecraft, and saves money by allowing the use of modern programming languages.[62]

  Servicing Mission 3B

Main article: STS-109

Servicing Mission 3B Columbia (STS-109) in March 2002 saw the installation of a new instrument, with the FOC being replaced by the Advanced Camera for Surveys (ACS). It also saw the revival of NICMOS, which had run out of coolant in 1999. A new cooling system was installed that reduced the instrument's temperature enough for it to be usable again. Although not as cold as its original design called for, the temperature is more stable, in many ways a better tradeoff.[60] ACS in particular enhanced the Hubble's capabilities; it and the revived NICMOS together imaged the Hubble Ultra Deep Field.

The mission replaced the solar arrays for the second time. The new arrays were derived from those built for the Iridium comsat system and were only two-thirds the size of the old arrays, resulting in less drag against the tenuous reaches of the upper atmosphere while providing 30 percent more power. The additional power allowed all instruments on board the Hubble to be run simultaneously, and reduced a vibration problem that occurred when the old, less rigid arrays entered and left direct sunlight. Hubble's Power Distribution Unit was also replaced in order to correct a problem with sticky relays, a procedure that required the complete electrical power down of the spacecraft for the first time since it was launched.[63]

  Servicing Mission 4

Main article: STS-125
Sister project Wikinews has related news: NASA launches Space Shuttle Atlantis
Astronauts work on Hubble during SM4
Hubble floats free from Atlantis after SM4.

Servicing Mission 4 (SM4), was the last scheduled shuttle mission (STS-125) for the Hubble Space Telescope in May 2009.[64] The servicing mission was first planned for October 14, 2008.[65] However on 27 September 2008, the Science Instrument Command and Data Handling (SI C&DH) unit failed. All science data passes through this unit before it can be transmitted to Earth. Although it has a backup unit, if the backup were to fail, the Hubble's useful life would be over.[66] Therefore, on 29 September 2008, NASA announced the launch of SM4 was postponed until 2009 so this unit could be replaced as well.[67] SM4, with a replacement SI C&DH unit,[68] was launched aboard Space Shuttle Atlantis on May 11, 2009.[69]

On SM4 astronauts, over the course of five spacewalks, installed two new instruments, Wide Field Camera 3 (WFC3), and the Cosmic Origins Spectrograph (COS). WFC3 will increase Hubble's observational capabilities in the ultraviolet and visible spectrums by up to 35 times due to its higher sensitivity and wider field of view. The telephone booth sized COS assembly replaced the Corrective Optics Space Telescope Axial Replacement (COSTAR) installed in 1993 to correct Hubble's spherical aberration problems. (COSTAR was no longer needed after the replacement of the last two instruments which did not have the necessary correction built in.) The COS will do observations in the ultraviolet parts of the spectrum, complementing the measurements done by the repaired STIS system. The service mission repaired two instruments that had failed, the Advanced Camera for Surveys (ACS) and the Space Telescope Imaging Spectrograph (STIS). They also performed other component replacements including: all three Rate Sensor Units (each containing two gas bearing gyroscopes); one of three Fine Guidance Sensor (FGS) units used to help keep pointing accuracy and increase platform stability; the SI C&DH unit; all six of the 125-pound (57 kg) nickel hydrogen batteries used to provide all Hubble's electrical power to support operations during the night portion of its orbit; and three New Outer Blanket Layer (NOBL) thermal insulation protective blankets. The batteries had never been replaced and were more than 13 years over their original design life.[70] Assuming testing and calibration of the new equipment goes well, the Hubble should resume routine operation in September 2009.[71][72][73] These efforts should keep the telescope fully functioning at least into 2014 and hopefully longer.[74]

Hubble was originally designed to be returned to earth on board a shuttle. With the retirement of the shuttle fleet this will no longer be possible. NASA engineers developed the Soft Capture and Rendezvous System (SCRS), a ring-like device that was attached to Hubble’s aft bulkhead which will enable the future rendezvous, capture, and safe disposal of Hubble by either a crewed or robotic mission.[75] Atlantis released the Hubble Space Telescope on May 19, 2009 back into space after all repairs were successfully made. The next mission will be to deorbit the Hubble at the end of its service life.

 Scientific Results

 Important Discoveries

One of Hubble's most famous images, "pillars of creation" shows stars forming in the Eagle Nebula (M16)

Hubble has helped to resolve some long-standing problems in astronomy, as well as turning up results that have required new theories to explain them. Among its primary mission targets was to measure distances to Cepheid variable stars more accurately than ever before, and thus constrain the value of the Hubble constant, the measure of the rate at which the universe is expanding, which is also related to its age. Before the launch of HST, estimates of the Hubble constant typically had errors of up to 50%, but Hubble measurements of Cepheid variables in the Virgo Cluster and other distant galaxy clusters provided a measured value with an accuracy of 10%, which is consistent with other more accurate measurements made since Hubble's launch using other techniques.[76]

While Hubble helped to refine estimates of the age of the universe, it also cast doubt on theories about its future. Astronomers from the High-z Supernova Search Team and the Supernova Cosmology Project[77] used the telescope to observe distant supernovae and uncovered evidence that, far from decelerating under the influence of gravity, the expansion of the universe may in fact be accelerating. This acceleration was later measured more accurately by other ground-based and space-based telescopes that confirmed Hubble's finding, but the cause of this acceleration is currently very poorly understood.

The high-resolution spectra and images provided by the Hubble have been especially well-suited to establishing the prevalence of black holes in the nuclei of nearby galaxies. While it had been hypothesized in the early 1960s that black holes would be found at the centers of some galaxies, and work in the 1980s identified a number of good black hole candidates, it fell to work conducted with the Hubble to show that black holes are probably common to the centers of all galaxies.[78][79] The Hubble programs further established that the masses of the nuclear black holes and properties of the galaxies are closely related. The legacy of the Hubble programs on black holes in galaxies is thus to demonstrate a deep connection between galaxies and their central black holes.

The collision of Comet Shoemaker-Levy 9 with Jupiter in 1994 was fortuitously timed for astronomers, coming just a few months after Servicing Mission 1 had restored Hubble's optical performance. Hubble images of the planet were sharper than any taken since the passage of Voyager 2 in 1979, and were crucial in studying the dynamics of the collision of a comet with Jupiter, an event believed to occur once every few centuries.

Other major discoveries made using Hubble data include proto-planetary disks (proplyds) in the Orion Nebula;[80] evidence for the presence of extrasolar planets around sun-like stars;[81] and the optical counterparts of the still-mysterious gamma ray bursts.[82] HST has also been used to study objects in the outer reaches of the Solar System, including the dwarf planets Pluto[83] and Eris.[84]

A unique legacy of Hubble are the Hubble Deep Field and Hubble Ultra Deep Field images, which utilized Hubble's unmatched sensitivity at visible wavelengths to create images of small patches of sky that are the deepest ever obtained at optical wavelengths. The images reveal galaxies billions of light years away, and have generated a wealth of scientific papers, providing a new window on the early Universe.

The non-standard object SCP 06F6 was discovered by the Hubble Space Telescope (HST) in February 2006.[85][86]

                                 Impact on Astronomy

The image “” cannot be displayed, because it contains errors.
Distant Galaxies in Deep Space in a Hubble Ultra Deep Field Photograph - Compilation of
Layered Images Taken
from 2003 Sept 24
    to 2004 Jan 16

Many objective measures show the positive impact of Hubble data on astronomy. Over 4,000 papers based on Hubble data have been published in peer-reviewed journals, and countless more have appeared in conference proceedings. Looking at papers several years after their publication, about one-third of all astronomy papers have no citations, while only 2% of papers based on Hubble data have no citations. On average, a paper based on Hubble data receives about twice as many citations as papers based on non-Hubble data. Of the 200 papers published each year that receive the most citations, about 10% are based on Hubble data.[87]

Although the HST has clearly had a significant impact on astronomical research, the financial cost of this impact has been large. A study on the relative impacts on astronomy of different sizes of telescopes found that while papers based on HST data generate 15 times as many citations as a 4 m ground-based telescope such as the William Herschel Telescope, the HST costs about 100 times as much to build and maintain.[88]

Making the decision between investing in ground-based versus space-based telescopes in the future is complex. Even before Hubble was launched, specialized ground-based techniques such as aperture masking interferometry had obtained higher-resolution optical and infrared images than Hubble would achieve, though restricted to targets about 108 times brighter than the faintest targets observed by Hubble.[89][90] Since then, advances in adaptive optics have extended the high-resolution imaging capabilities of ground-based telescopes to the infrared imaging of faint objects. The usefulness of adaptive optics versus HST observations depends strongly on the particular details of the research questions being asked. In the visible bands, adaptive optics can only correct a relatively small field of view, whereas HST can conduct high-resolution optical imaging over a wide field. Only a small fraction of astronomical objects are accessible to high-resolution ground-based imaging; in contrast Hubble can perform high-resolution observations of any part of the night sky, and on objects that are extremely faint.


The Hubble Space Telescope as seen from Space Shuttle Discovery during its second servicing mission (STS-82).

Anyone can apply for time on the telescope; there are no restrictions on nationality or academic affiliation.[91] Competition for time on the telescope is intense, and the ratio of time requested to time available (the oversubscription ratio) typically ranges between 6 and 9.[92]

Calls for proposals are issued roughly annually, with time allocated for a cycle lasting approximately one year. Proposals are divided into several categories; 'general observer' proposals are the most common, covering routine observations. 'Snapshot observations' are those in which targets require only 45 minutes or less of telescope time, including overheads such as acquiring the target; snapshot observations are used to fill in gaps in the telescope schedule that cannot be filled by regular GO programs.[93]

Astronomers may make 'Target of Opportunity' proposals, in which observations are scheduled if a transient event covered by the proposal occurs during the scheduling cycle. In addition, up to 10% of the telescope time is designated Director's Discretionary (DD) Time. Astronomers can apply to use DD time at any time of year, and it is typically awarded for study of unexpected transient phenomena such as supernovae.[94] Other uses of DD time have included the observations that led to the production of the Hubble Deep Field and Hubble Ultra Deep Field, and in the first four cycles of telescope time, observations carried out by amateur astronomers.

  Amateur Observations

The first director of STScI, Riccardo Giacconi, announced in 1986 that he intended to devote some of his Director Discretionary time to allowing amateur astronomers to use the telescope. The total time to be allocated was only a few hours per cycle, but excited great interest among amateur astronomers.[95]

Proposals for amateur time were stringently peer reviewed by a committee of leading amateur astronomers, and time was awarded only to proposals that were deemed to have genuine scientific merit, did not duplicate proposals made by professionals, and required the unique capabilities of the space telescope. In total, 13 amateur astronomers were awarded time on the telescope, with observations being carried out between 1990 and 1997. One such study was Transition Comets — UV Search for OH Emissions in Asteroids. The very first proposal, A Hubble Space Telescope Study of Post Eclipse Brightening and Albedo Changes on Io, was published in Icarus,[96] a journal devoted to solar system studies. After that time, however, budget reductions at STScI made the support of work by amateur astronomers untenable, and no further amateur programs have been carried out.[97]

  Hubble Data

 Transmission to Earth

Hubble Control Center, Goddard Space Flight Center

Hubble data was initially stored on the spacecraft. When launched, the storage facilities were old-fashioned reel-to-reel tape recorders, but these were replaced by solid state data storage facilities during servicing missions 2 and 3A. Approximately twice daily, The Hubble Space Telescope radios data to a satellite in the geosynchronous Tracking and Data Relay Satellite System(TDRS).[98] The TDRS then downlinks the science data to one of two 60-foot (18-meter) diameter high gain microwave antennas located at the White Sands Test Facility in White Sands, New Mexico.[98] From there they are sent to the Goddard Space Flight Center and finally to the Space Telescope Science Institute for archiving.[99]

This data is then transmitted to the Space Telescope Operations Control Center (STOCC) located in Greenbelt, Maryland.[98]


All Hubble data is eventually made available via the archives of STScI.[100] Data is usually proprietary—available only to the principal investigator (PI) and astronomers designated by the PI—for one year after being taken. The PI can apply to the director of the STScI to extend or reduce the proprietary period in some circumstances.[101]

Observations made on Director's Discretionary Time are exempt from the proprietary period, and are released to the public immediately. Calibration data such as flat fields and dark frames are also publicly available straight away. All data in the archive is in the FITS format, which is suitable for astronomical analysis but not for public use.[102] The Hubble Heritage Project processes and releases to the public a small selection of the most striking images in JPEG and TIFF formats.[103]

 Pipeline Reduction

Astronomical data taken with CCDs must undergo several calibration steps before it is suitable for astronomical analysis. STScI has developed sophisticated software that automatically calibrates data when it is requested from the archive using the best calibration files available. This 'on-the-fly' processing means that large data requests can take a day or more to be processed and returned. The process by which data is calibrated automatically is known as 'pipeline reduction', and is increasingly common at major observatories. Astronomers may if they wish retrieve the calibration files themselves and run the pipeline reduction software locally. This may be desirable when calibration files other than those selected automatically need to be used.[104]

 Data Analysis

Hubble data can be analysed using many different packages. STScI maintains the custom-made STSDAS (Space Telescope Science Data Analysis System) software, which contains all the programs needed to run pipeline reduction on raw data files, as well as many other astronomical image processing tools, tailored to the requirements of Hubble data. The software runs as a module of IRAF, a popular astronomical data reduction program.[105]

  Outreach Activities

In 2001, NASA polled internet users to find out what they would most like Hubble to observe; they overwhelmingly selected the Horsehead Nebula.

It has always been important for the Space Telescope to capture the public's imagination, given the considerable contribution of taxpayers to its construction and operational costs.[106] After the difficult early years when the faulty mirror severely dented Hubble's reputation with the public, the first servicing mission allowed its rehabilitation as the corrected optics produced numerous remarkable images.

Several initiatives have helped to keep the public informed about Hubble activities. The Hubble Heritage Project was established to produce high-quality images for public consumption of the most interesting and striking objects observed. The Heritage team is composed of amateur and professional astronomers, as well as people with backgrounds outside astronomy, and emphasizes the aesthetic nature of Hubble images. The Heritage Project is granted a small amount of time to observe objects which, for scientific reasons, may not have images taken at enough wavelengths to construct a full-color image.[107]

In addition, STScI maintains several comprehensive websites for the general public containing Hubble images and information about the observatory.[108][109][110][111] The outreach efforts are coordinated by the Office for Public Outreach, which was established in 2000 to ensure that US taxpayers saw the benefits of their investment in the space telescope program.

A small scale replica of the Hubble

Since 1999, the leading Hubble outreach activities group in Europe has been the Hubble European Space Agency Information Centre (HEIC).[112] This office was established at the Space Telescope - European Coordinating Facility (ST-ECF) in Munich, Germany. HEIC's mission statement is to fulfill the Hubble Space Telescope outreach and education tasks for the European Space Agency (ESA). The work is centered on the production of news and photo releases that highlight interesting Hubble science results and images. These are often European in origin, and so not only increase the awareness of ESA’s Hubble share (15%), but the contribution of European scientists to the observatory. The group also produces video releases and other innovative educational material.

There is a replica of the Hubble Telescope on the courthouse lawn in Marshfield, Missouri, the hometown of namesake Edwin P. Hubble.


  Equipment Failure

A WFPC2 image of a small region of the Tarantula Nebula in the Large Magellanic Cloud

Past servicing missions have exchanged old instruments for new ones, both avoiding failure and making possible new types of science. Without servicing missions, all of the instruments will eventually fail. In August 2004, the power system of the Space Telescope Imaging Spectrograph (STIS) failed, rendering the instrument inoperable. The electronics had originally been fully redundant, but the first set of electronics failed in May 2001.[113] This power supply was fixed during servicing mission 4 in May 2009. Similarly, the main camera (the ACS) primary electronics failed in June 2006, and the power supply for the backup electronics failed on January 27, 2007.[114] Only the instrument's Solar Blind Channel (SBC) was operable using the side-1 electronics. A new power supply for the wide angle channel was added during SM 4, but quick tests revealed this did not help the high resolution channel.[115] As of late May 2009, test of both repaired instruments are still ongoing.

HST uses gyroscopes to stabilize itself in orbit and point accurately and steadily at astronomical targets. Normally, three gyroscopes are required for operation; observations are still possible with two, but the area of sky that can be viewed would be somewhat restricted, and observations requiring very accurate pointing are more difficult.[116] There are further contingency plans for science with just one gyro,[117] but if all gyros fail, continued scientific observations will not be possible. In 2005, it was decided to switch to two-gyroscope mode for regular telescope operations as a means of extending the lifetime of the mission. The switch to this mode was made in August 2005, leaving Hubble with two gyroscopes in use, two on backup, and two inoperable.[118] One more gyro failed in 2007.[119] By the time of the final repair mission, during which all six gyros were replaced (with two new pairs and one refurbished pair), only three gyros were still working.[120]

In addition to predicted gyroscope failure, Hubble eventually required a change of nickel hydrogen batteries. A robotic servicing mission including this would be tricky, as it requires many operations, and a failure in any might result in irreparable damage to Hubble. Alternatively, the observatory was designed so that during shuttle servicing missions it would receive power from a connection to the space shuttle, and this capability could have been utilized by adding an external power source (an additional battery) rather than changing the internal ones.[121]. In the end, however the batteries were simply replaced during service mission 4.

  Orbital Decay

Hubble orbits the Earth in the extremely tenuous upper atmosphere, and over time its orbit decays due to drag. If it is not re-boosted by a shuttle or other means, it will re-enter the Earth's atmosphere sometime between 2010 and 2032, with the exact date depending on how active the Sun is and its impact on the upper atmosphere. The state of Hubble's gyros also affects the re-entry date, as a controllable telescope can be oriented to minimize atmospheric drag. Not all of the telescope would burn up on re-entry. Parts of the main mirror and its support structure would probably survive, leaving the potential for damage or even human fatalities (estimated at up to a 1 in 700 chance of human fatality for a completely uncontrolled re-entry).[122] With the success of STS-125, the natural re-entry date range has been extended further as the mission replaced its gyroscopes, even though Hubble was not re-boosted to a higher orbit.

NASA's original plan for safely de-orbiting Hubble was to retrieve it using a space shuttle. The Hubble telescope would then have most likely been displayed in the Smithsonian Institution. This is no longer considered practical because of the costs of a shuttle flight (US$500 million by some estimates), the mandate to retire the space shuttles by 2010, and the risk to a shuttle's crew. Instead NASA looked at adding an external propulsion module to allow controlled re-entry.[123] The final decision was not to attach a de-orbit module on STS-125, but to add a grapple fixture so a robotic mission could more easily attach such a module later.[124] There is also some discussion regarding a visit by the manned Orion spacecraft, for the purpose of attaching such a propulsion module.

  Debate over Final Servicing Mission

Columbia was originally scheduled to visit Hubble again in February 2005. The tasks of this servicing mission would have included replacing a fine guidance sensor and two broken gyroscopes, placing protective "blankets" on top of torn insulation, replacing the Wide Field and Planetary Camera 2 with a new Wide Field Camera 3 and installing the Cosmic Origins Spectrograph (COS). However, then-NASA Administrator Sean O'Keefe decided that, in order to prevent a repeat of the Columbia accident, all future shuttles must be able to reach the 'safe-haven' of the International Space Station (ISS) should an in-flight problem develop that would preclude the shuttle from landing safely. The shuttle is incapable of reaching both the Hubble Space Telescope and the International Space Station during the same mission, and so future manned service missions were canceled.[125]

This decision was assailed by numerous astronomers, who felt that the Hubble was valuable enough to merit the human risk. HST's successor, the James Webb Space Telescope (JWST), will not be ready until well after the 2010 scheduled retirement of the space shuttle. While Hubble can image in the ultraviolet and visible wavelengths, JWST is limited to the infrared. The break in space-observing capabilities between the decommissioning of Hubble and the commissioning of a successor is of major concern to many astronomers, given the great scientific impact of HST taken as a whole.[126] The consideration that the JWST will not be located in low Earth orbit, and therefore cannot be easily repaired in the event of an early failure, only makes these concerns more acute. Nor can JWST's instruments be easily upgraded. On the other hand, many astronomers felt strongly that the servicing of Hubble should not take place if the costs of the servicing come from the JWST budget.

In January 2004, O'Keefe said he would review his decision to cancel the final shuttle servicing mission to HST due to public outcry and requests from Congress for NASA to look for a way to save it. On 13 July 2004 an official panel from the National Academy of Sciences made the recommendation that the Hubble be preserved despite the apparent risks. Their report urged "NASA should take no actions that would preclude a space shuttle servicing mission to the Hubble Space Telescope". In August 2004, O'Keefe requested the Goddard Space Flight Center to prepare a detailed proposal for a robotic service mission. These plans were later canceled, the robotic mission being described as "not feasible".[127] In late 2004, several Congressional members, led by Sen. Barbara Mikulski (D-MD), held public hearings and carried on a fight with much public support (including thousands of letters from school children across the country) to get the Bush Administration and NASA to reconsider the decision to drop plans for a Hubble rescue mission.[128]

The arrival in April 2005 of the new NASA Administrator, Mike Griffin, changed the status of the proposed shuttle rescue mission. At the time, Griffin stated he would reconsider the possibility of a manned servicing mission. Soon after his appointment, he authorized Goddard Space Flight Center to proceed with preparations for a manned Hubble maintenance flight, saying he would make the final decision on this flight after the next two shuttle missions. In October 2006 Griffin gave the final go-ahead for the mission. The 11-day STS-125 mission by Atlantis was scheduled for launch in October 2008,[129].[130] However, the main data-handling unit failed in late September 2008, halting all reporting of scientific data. This unit has a backup, and on October 25, 2008 Hubble was successfully rebooted and is reported to be functioning normally.[131] However, since a failure in backup unit would now leave the Hubble helpless, the service mission was postponed to allow astronauts to repair this problem. This mission got underway on May 11, 2009[132] and completed all the long planned replacements as well as additional repairs, including replacing the main data-handling unit.


Several space telescopes are claimed to be successors to Hubble, and some ground based astronomy lays claim to higher optical achievements.

The James Webb Space Telescope (JWST) is a planned infrared space observatory, and lays claim to being a planned successor of Hubble.[133] The main scientific goal is to observe the most distant objects in the universe, beyond the reach of existing instruments. JWST is a NASA-led international collaboration between NASA, the European Space Agency and the Canadian Space Agency. Formerly called the Next Generation Space Telescope (NGST), it was renamed after NASA's second administrator, James E. Webb, in 2002. The telescope's launch is planned for no earlier than June 2013. It will be launched on an Ariane 5 rocket.[134]

Another similar effort is the European Space Agency's Herschel Space Observatory, launched on May 14, 2009. Like JWST, Herschel has a mirror substantially larger than the Hubble, but observes only in the infrared.

Much further out is the Advanced Technology Large-Aperture Space Telescope (AT-LAST)[135] is a proposed 8 to 16-meter (320 to 640-inch) optical space telescope that if approved, built, and launched (using the planned Ares V rocket slated for Project Constellation flights to the Moon), would be a true replacement and successor for the Hubble Space Telescope (HST); with the ability to observe and photograph astronomical objects in the optical, ultraviolet, and Infrared wavelengths, but with substantially better resolution than the Hubble.

Existing ground based telescopes, and various proposed Extremely Large Telescopes, certainly exceed the Hubble in terms of sheer light gathering power, due to their much larger mirrors. In some cases, they may also be able to match or beat the Hubble in resolution by using adaptive optics (AO). However, AO on large ground-based reflectors will not make Hubble and other space telescopes obsolete. Most AO systems sharpen the view over a very narrow field - Lucky Cam, for example, produces crisp images just 10" to 20" wide, whereas Hubble's cameras are super sharp across a 2½' (150") field. Furthermore, space telescopes can study the heavens across the entire electromagnetic spectrum, most of which is blocked by Earth's atmosphere. Finally, the background sky is darker in space than on the ground, because air absorbs solar energy during the day and then releases it at night, producing a faint—but nevertheless discernible — airglow that washes out faint, low-contrast astronomical objects."[136]

  See Also:



  1. ^ HST Program Office (2003) (.PDF). Hubble Facts: HST Orbit Decay and Shuttle Re-boost. Goddard Space Flight Center. Retrieved on 2009-05-12. 
  2. ^ Amiko Kauderer (26 March 2009). "Space Shuttle Mission Overview - STS-125: The Final Visit". NASA. Retrieved on 2009-05-02. 
  3. ^ SYNPHOT User's Guide, version 5.0, Space Telescope Science Institute, p. 27
  4. ^ "NASA's Great Observatories". NASA. Retrieved on 2008-04-26. 
  5. ^ H. Oberth (1923). Die Rakete zu den Planetenräumen. R. Oldenbourg-Verlay. 
  6. ^ Spitzer, L., "Report to Project Rand: Astronomical Advantages of an Extra-Terrestrial Observatory", reprinted in NASA SP-2001-4407: Exploring the Unknown, Chapter 3, Document III-1, p. 546.
  7. ^ "Lyman Spitzer, Jr.". Caltech. Retrieved on 2008-04-26. 
  8. ^ Baum, W. A. and Johnson, F. S. and Oberly, J. J. and Rockwood, C. C. and Strain, C. V. and Tousey, R. (November 1946). "Solar Ultraviolet Spectrum to 88 Kilometers". Phys. Rev (American Physical Society) 70 (9–10): 781–782. doi:10.1103/PhysRev.70.781. 
  9. ^ "Up close and personal -". Institute of Physics ( 2 March 2009. Retrieved on 20 April 2009. 
  10. ^ "OAo". NASA. Retrieved on 2008-04-26. 
  11. ^ Spitzer, History of the Space Telescope, p. 32.
  12. ^ Spitzer, History of the Space Telescope, pp. 33–34.
  13. ^ a b Spitzer, History of the Space Telescope, p. 34.
  14. ^ "Memorandum of Understanding Between The European Space Agency and The United States National Aeronautics and Space Administration", reprinted in NASA SP-2001-4407: Exploring the Unknown, Chapter 3, Document III-29, p. 671.
  15. ^ "A Chronology of the Hubble Space Telescope". NASA. Retrieved on 2008-04-26. 
  16. ^ "The path to the Hubble Space Telescope". NASA. Retrieved on 2008-04-26. 
  17. ^ Dunar, pp. 487–488.
  18. ^ a b Dunar, p. 489.
  19. ^ "Hubble: The Case of the Single-Point Failure" (PDF). Science Magazine. 1990-08-17. Retrieved on 2008-04-26. 
  20. ^ Allen report, page 3–4.
  21. ^ Associated Press (1990-07-28). "Losing Bid Offered 2 Tests on Hubble". Retrieved on 2008-04-26. 
  22. ^ "Hubble Space Telescope Stand-in Gets Starring Role". NASA. 2001-09-21. Retrieved on 2008-04-26. 
  23. ^ "2.4m Observatory Technical Note". New Mexico Institute of Mining and Technology. 2008-01-01. Retrieved on 2008-04-26. 
  24. ^ Dunar, p. 496
  25. ^ Ghitelman, David, The Space Telescope, Michael Friedman Publishing, New York, 1987, p.32
  26. ^ Robberto, M. and Sivaramakrishnan, A. and Bacinski, J.J. and Calzetti, D. and Krist, J.E. and MacKenty, J.W. and Piquero, J. and Stiavelli, M. (2000). "The Performance of HST as an Infrared Telescope" (PDF). Proc. SPIE 4013: 386–393. doi:10.1117/12.394037. 
  27. ^ Dunar, p. 504.
  28. ^ "Hubble Space Telescope Systems". Goddard Space Flight Center. Retrieved on 2008-04-26. 
  29. ^ Ghitelman, David, The Space Telescope, Michael Friedman Publishing, New York, 1987, p. 50
  30. ^ Dunar, p. 508.
  31. ^ Brandt J.C. et al. (1994). "The Goddard High Resolution Spectrograph: Instrument, goals, and science results" (PDF). Publications of the Astronomical Society of the Pacific 106: 890–908. doi:10.1086/133457. 
  32. ^ Bless R.C., Walter L.E., White R.L. (1992), High Speed Photometer Instrument Handbook, v 3.0, STSci
  33. ^ Benedict, G. Fritz; McArthur, Barbara E. (2005). "High-precision stellar parallaxes from Hubble Space Telescope fine guidance sensors" in Transits of Venus: New Views of the Solar System and Galaxy. D.W. Kurtz (ed.) Proceedings of IAU Colloquium #196,: 333–346, Cambridge University Press. 
  34. ^ Dunar, pp. 486–487.
  35. ^ Nancy Grace Roman, "Exploring the Universe: Space-Based Astronomy and Astrophysics", in NASA SP-2001-4407: Exploring the Unknown Chapter 3, p. 536.
  36. ^ Primer, Chapter 2.
  37. ^ Diane Karakla, Editor and Susan Rose, Technical Editor (2004). HST Primer for Cycle 14.
  38. ^ "Hubble Space Telescope Servicing Mission 4 Space Telescope Operations Control Center" (PDF). NASA. 
  39. ^ Tatarewicz, SP-4219, p. 371.
  40. ^ John Wilford (9 April 1990). "Telescope Is Set to Peer at Space and Time". New York Times. Retrieved on 2009-01-19. 
  41. ^ "STS-31". NASA. Retrieved on 2008-04-26. 
  42. ^ "The European Homepage for the NASA/ESA Hubble Space Telescope — Frequently Asked Questions". Retrieved on 2007-01-10. 
  43. ^ Burrows C.J. et al. (1991). "The imaging performance of the Hubble Space Telescope". Astrophysical Journal 369 (part 2): L21. doi:10.1086/185950. 
  44. ^ "Effects of OTA Spherical Aberration". STScI. Retrieved on 2008-04-26. 
  45. ^ a b Tatarewicz, SP-4219, p. 375.
  46. ^ "The Naked Gun 2½: The Smell of Fear". Internet Movie Database. Retrieved on 2008-04-26. 
  47. ^ Dunar, pp. 514–515.
  48. ^ Allen, The Hubble Space Telescope Optical Systems Failure Report, chapter VII. The spacing of the field lens in the corrector was to have been done by laser measurements off the end of an invar bar. Instead of illuminating the end of the bar, however, the laser in fact was reflected from a worn spot on a black-anodized metal cap placed over the end of the bar to isolate its center (visible through a hole in the cap). The technician who performed the test noted an unexpected gap between the field lens and its supporting structure in the corrector and filled it in with an ordinary metal washer.
  49. ^ Dunar, p. 512.
  50. ^ Allen report, p. 9–3.
  51. ^ "Mirror, Primary Backup, Hubble Space Telescope.". National Air and Space Museum. Retrieved on 2008-04-26. 
  52. ^ Chaisson, Eric (1994) The Hubble Wars; Astrophysics Meets Astropolitics in the Two-Billion-Dollar Struggle Over the Hubble Space Telescope. Harper Collins Publishers, ISBN 0-06-017114-6, p. 184.
  53. ^ Allen, The Hubble Space Telescope Optical Systems Failure Report, appendix E.
  54. ^ a b Tatarewicz, SP-4219, p. 376.
  55. ^ Jedrzejewski R.I., Hartig G., Jakobsen P., Crocker J.H., Ford H. C. (1994). "In-orbit performance of the COSTAR-corrected Faint Object Camera" (abstract). Astrophysical Journal Letters 435: L7–L10. doi:10.1086/187581. 
  56. ^ Tatarewicz, SP-4219, p. 384–387.
  57. ^ "Servicing Mission 1". NASA. Retrieved on 2008-04-26. 
  58. ^ Trauger J.T., Ballester G.E., Burrows C.J., Casertano S., Clarke J.T., Crisp D.. et al. (1994). "The on-orbit performance of WFPC2" (abstract). Astrophysical Journal Letters 435: L3–L6. doi:10.1086/187580. 
  59. ^ "Servicing Mission 2". NASA. Retrieved on 2008-04-26. 
  60. ^ a b "NICMOS Temperature History". STSI. Retrieved on 2008-04-26. 
  61. ^ "Servicing Mission 3A Overview". NASA. Retrieved on 2008-04-26. 
  62. ^ Lockheed Martin Missiles and Space. "Hubble Space Telescope Servicing Mission 3A Media Reference Guide" (PDF). NASA. Retrieved on 2008-04-27.  Page 5-9 and Section 7.1.1.
  63. ^ "Servicing Mission 3". NASA. Retrieved on 2008-04-26. 
  64. ^ Hubble Space Telescope Servicing Mission 4, NASA. Retrieved 29 September 2008.
  65. ^ "MEDIA ADVISORY : M08-181: NASA Announces New Target Launch Dates, Status News Conference". NASA. Retrieved on 2008-09-25. 
  66. ^ "Hubble suddenly quiet". Science News, September 29, 2008.
  67. ^ Dunn, Marcia. "NASA delays repair mission to Hubble telescope". Yahoo news, September 29, 2008.
  68. ^ "Hubble Space Telescope Servicing Mission 4". NASA. Retrieved on 2009-05-12. 
  69. ^ Morris, Jefferson. "Shuttle Blasts Off To Repair Hubble". Aviation Week, May 11, 2009.
  70. ^ Hubble Nickel Hydrogen Batteries. NASA. Accessed 20 May 2009
  71. ^ Frank D. Roylance (May 19, 2009). "Hubble refitted for golden years". The Baltimore Sun.,0,828998.story. Retrieved on May 18, 2009. 
  72. ^ William Harwood (May 19, 2009). "Repaired Hubble relaunched from shuttle". CNET. Retrieved on May 24, 2009. 
  73. ^ Associated Press. "Spacewalkers give Hubble its last hug". MSNBC, May 18, 2009.
  74. ^ "Servicing Mission 4". NASA. Retrieved on 2008-09-21. 
  75. ^ Soft Capture and Rendezvous System. NASA. Accessed 20 May 2009
  76. ^ W. L. Freedman, B. F. Madore, B. K. Gibson, L. Ferrarese, D. D. Kelson, S. Sakai, J. R. Mould, R. C. Kennicutt, Jr., H. C. Ford, J. A. Graham, J. P. Huchra, S. M. G. Hughes, G. D. Illingworth, L. M. Macri, P. B. Stetson (2001). "Final Results from the Hubble Space Telescope Key Project to Measure the Hubble Constant". The Astrophysical Journal 553 (1): 47–72. doi:10.1086/320638. . Preprint available here.
  77. ^ "Supernova Cosmology Project". Lawrence Berkeley Laboratory. Retrieved on 2008-04-26. 
  78. ^ "Hubble Confirms Existence of Massive Black Hole at Heart of Active Galaxy". Goddard Space Flight Center, NASA. 1994-05-25. Retrieved on 2008-04-26. 
  79. ^ Gebhardt, K. and Bender, R. and Bower, G. and Dressler, A. and Faber, SM and Filippenko, A.V. and Green, R. and Grillmair, C. and Ho, L.C. and Kormendy, J. and others (2000). "A Relationship between Nuclear Black Hole Mass and Galaxy Velocity Dispersion". The Astrophysical Journal 539 (1): L13–L16. doi:10.1086/312840.  Preprint here [1].
  80. ^ "Hubble Confirms Abundance of Protoplanetary Disks around Newborn Stars". STScI. 1994-06-13. Retrieved on 2008-04-26. 
  81. ^ "Hubble Finds Extrasolar Planets Far Across Galaxy". NASA. 2006-10-04. Retrieved on 2008-04-26. 
  82. ^ "Autopsy of an Explosion". NASA. 1999-03-26. Retrieved on 2008-04-26. 
  83. ^ "APOD: March 11, 1996 - Hubble Telescope Maps Pluto". NASA. Retrieved on 2008-04-26. 
  84. ^ "Astronomers Measure Mass of Largest Dwarf Planet". NASA. 2007-06-14. Retrieved on 2008-04-26. 
  85. ^ How they wonder what you are, Nature News, 19 September 2008
  86. ^ Gänsicke et al.: SCP06F6: A carbon-rich extragalactic transient at redshift z~0.14. Preprint, 2008.
  87. ^ STSCi newsletter, v. 20, issue 2, Spring 2003
  88. ^ Benn C.R., Sánchez S.F. (2001). "Scientific Impact of Large Telescopes". Publications of the Astronomical Society of the Pacific 113: 385. doi:10.1086/319325. . arXiv preprint.
  89. ^ Haniff, C. A.; Mackay, C. D.; Titterington, D. J.; Sivia, D.; Baldwin, J. E., (August 1987). "The first images from optical aperture synthesis". Nature 328: 694. doi:10.1038/328694a0. 
  90. ^ Buscher, D. F.; Baldwin, J. E.; Warner, P. J.; Haniff, C. A. (July 1990). "Detection of a bright feature on the surface of Betelgeuse". Monthly Notices Royal Astronomical Society 245: 7. 
  91. ^ "Cycle 17 Announcement Page". Space Telescope Science Institute. 2007-12-03. Retrieved on 2008-04-26. 
  92. ^ Hubble Space Telescope Call for Proposals for Cycle 14, (2004), eds. Neill Reid and Jim Younger
  93. ^ "Hubble Space Telescope Call for Proposals" (PDF). STScI. Retrieved on 2008-04-26.  Chapter 3.
  94. ^ Hubble Space Telescope Call for Proposals, Chapter 3.7, Director’s Discretionary (DD) Time Proposals.
  95. ^ "Amateur Astronomers Will Use NASA's Hubble Space Telescope". STScI. 1992-09-10. Retrieved on 2008-04-26. 
  96. ^ Secosky, J and M. Potter. 1994. A Hubble Space Telescope Study of Posteclipse Brightening and Albedo Changes on Io. Icarus. 111: 73-78.
  97. ^ O'Meara S. (1997), The Demise of the HST Amateur Program, Sky and Telescope, June 1997, p.97.
  98. ^ a b c "The Hubble Program - Hubble Operations - Capturing Images". NASA. 08 July 2008. Retrieved on 14 May 2009.  Click on the web page image to retrieve information.
  99. ^ Primer, Section 7.
  100. ^ "The Hubble Telescope". STScI. Retrieved on 2008-04-26. 
  101. ^ Primer, Section 7.2
  102. ^ Primer, Chapter 7.
  103. ^ "The Hubble Heritage Project". STScI. Retrieved on 2008-04-26. 
  104. ^ Primer, Section 7.2.1
  105. ^ Primer, Section 7.1.1
  106. ^ "National Aeronautics and Space Administration 2003 Strategic Plan" (PDF). NASA. 
  107. ^ "The Hubble Heritage Project". STScI. Retrieved on 2008-04-26. 
  108. ^ "HubbleSite". STScI. Retrieved on 2008-04-26. 
  109. ^ "NewsCenter". STScI. Retrieved on 2008-04-26. 
  110. ^ "News Release Archive: Entire Collection". STScI. Retrieved on 2008-04-26. 
  111. ^ "Hubble Public Talks". STScI. Retrieved on 2008-04-26. 
  112. ^ "The European Homepage For The NASA/ESA Hubble Space Telescope". ESA. Retrieved on 2008-04-26. 
  113. ^ "Space Telescope Imaging Spectrograph". STScI. Retrieved on April 26, 2008. 
  114. ^ "Engineers Investigate Issue on One of Hubble's Science Instruments". NASA. Retrieved on April 26, 2008. 
  115. ^ "Advanced Camera for Surveys". Space Telescope Science Institute. Retrieved on May 21, 2009. 
  116. ^ Sembach, K. R., et al. 2004, HST Two-Gyro Handbook, Version 1.0, (Baltimore: STScI)
  117. ^ "NASA Hubble Space Telescope Daily Report # 4537". Retrieved on January 6, 2009. 
  118. ^ "NASA/ESA Hubble Space Telescope Begins Two-Gyro Science Operations". Retrieved on January 9, 2009. 
  119. ^ Jeff Hecht. "Hubble telescope loses another gyroscope". New Scientist. Retrieved on January 6, 2009. 
  120. ^ William Harwood. "Endeavour to go Nov. 14; Hubble slips deeper into '09". Spaceflight Now. Retrieved on January 6, 2009. 
  121. ^ Whitehouse, Dr. David (April 23, 2004). "NASA optimistic about Hubble fate". BBC News. Retrieved on January 10, 2007. 
  122. ^ Whitehouse, Dr. David (2004-01-17). "Why Hubble is being dropped". BBC News. Retrieved on 2007-01-10. 
  123. ^ Cowing, Keith (2005-07-22). "NASA Considering Deletion of Hubble Deorbit Module". SpaceRef. Retrieved on 2007-01-10. 
  124. ^ Leonard David (2005-09-14). "Health Checkup: Engineers Work to Stall Hubble's Death". Retrieved on 2008-04-28. 
  125. ^ "Servicing Mission 4 Cancelled". STScI. 16 January 2004. Retrieved on 28 April 2008. 
  126. ^ "2004 Annual Report" (PDF). Astronomy and Astrophysics Advisory Committee.  Section 3.1 - The Scientific Impact of the HST SM4 Cancellation.
  127. ^ Gugliotta, Guy (12 April 2005). "Nominee Backs a Review Of NASA's Hubble Decision". The Washington Post. Retrieved on 10 January 2007. 
  128. ^ Barbara Mikulski (7 February 2005). Mikulski Vows To Fight For Hubble. Press release. Retrieved on 2008-04-26. 
  129. ^ "Servicing Mission 4". NASA. Retrieved on 21 September 2008. 
  130. ^ Boyle, Alan (31 October 2006). "NASA gives green light to Hubble rescue". MSNBC. Retrieved on 2007. 
  131. ^ "Hubble re-opens an eye". New Scientist. 28 October 2008. Retrieved on 29 October 2008. 
  132. ^ "NASA Sets Target Shuttle Launch Date for Hubble Servicing Mission". NASA. 4 December 2008. Retrieved on 2008-12-05. 
  133. ^ John Matson (May 8, 2009). "Last Dance with the Shuttle: What's in Store for the Final Hubble Servicing Mission". Scientific American. Retrieved on May 18, 2009. 
  134. ^ "About JWST'S Launch". NASA. Retrieved on 2006-11-04. 
  135. ^ "What Will Astronomy Be Like in 35 Years? Astronomy magazine, August, 2008
  136. ^ Fienberg, Rick (2007-09-14). "Sharpening the 200-inch (5,100 mm)". News. Sky and Telescope magazine. Retrieved on 2008-07-01. 

  External links

Sister project Wikimedia Commons has media related to: Hubble Space telescope
Listen to this article (info/dl)
Play sound
Spoken Wikipedia
This audio file was created from a revision dated 2006-05-29, and does not reflect subsequent edits to the article. (Audio help)