Ericsson Command List


 
allip:acl=a1;
allip:acl=a2;
allip:acl=a3;
rlsbp:cell=S198a;     !   if CB is yes site is new!
rrpar;
!*************************************************************!
mgcep:cell=j042a;    !   MSC command to find BSC   !
rlstp:cell=no0088b;         !   check if cell is halted   !
rlstc:cell=no0088c,state=halted;   !   halt cell   !
rlstc:cell=J271A,state=active;   ! activate cell !
!***************************************************************!
!*************   MOSTUSED   *********************************!
!*************************************************************!
rxtcp:moty=rxotg,cell=lv0013c;    !   find TG from CELL    !
rxtcp:mo=rxotg-102;            ! find cell from tg 
rlcrp:cell=MT111c;       !  status channels  busy/idle rlslp  !
rxcdp:mo=rxotg-188;        !   tg configuration   !
rxmsp:mo=rxocf-51,subord;     !   check staste of cf   !
rxmfp:mo=rxotrx-155-8;     !   fault code   !
rxmfp:mo=rxotx-34-8;    !   fault on Radio   !
rxmsp:mo=rxotrx-34-8,subord;     !   status   !
rxmsp:mo=rxocf-14;
rxmsp:mo=rxotrx-205-5,subord;
rxelp:mo=rxocf-110;      !   error log print !
!**************************************************************************!
!************************     DIP / T1               **********************!
!***************************************************************************!
rxapp:mo=rxotg-42;      !    list DIP from DEV   devid by 24 to get dip !
radep:dev=RBLT3-3922;    !  get SNT   !
ntcop:snt=ETM3-3,dipinf;     !    find dip info from snt   !
dtstp:dip=67RB3;      !   state of dip   !
dtstp:dip=all,state=wo;
stdep:dev=rblt3-49&&-72;
dtqsr:dip=5ODP0,degr,unacc,sf;    !   clear dip errors   !
dtqsp:dip=110rb3;      !   print quality sup obj for dip   !
dtqup:dip=16RALT;     !    quality   !
dtbli:dip=137RB3;      !  block dip  !
dtble:dip=137RB3;       !   de-block dip   !
rapti:dev=RBLT24-762,sdev=0;        !  tel ts for device  !
rxmdp:moty=rxots,dev=RBLT24-762;   !   time slots on device   !
rxapi:mo=rxotg-60,dcp=287&&310,dev=rblt3-3744&&-3767; ! change T1  !
!**************************************************************************!
!********************   EDGEACTIVATION  / DEACTIVATION    *****************!
dtdip:dip=102rb3;         !  get snt for dip   !
ntcop:snt=ETM3-1;
!************************************************************************!
!*****************         RADIO                      *******************!
!************************************************************************!
rxbli:mo=rxotrx-188-6,subord,force;       !   block radio force    !
Rxese:mo=rxotrx-188-6,subord;             !     take out of service    !
rxesi:mo=rxotrx-188-6,subord;              !  put in service     !
rxble:mo=rxotrx-188-6,subord;              !   de-block radio     !
rxcdp:mo=rxotg-188;                       !  status tg    !
rxmfp:mo=rxotx-55-1;             !   fault info   !
rxmsp:mo=rxocf-14,subord;
rxmsp:mo=rxotrx-85-0,subord;
rxmsp:mo=rxotrx-129-3,subord;      !    check state  !
rxbli:mo=rxotrx-129-3;        !  soft block    !
rxtei:mo=rxotrx-129-3;         !   test radio   !
rxble:mo=rxotrx-129-3;        !   soft de-block    !
rxmop:mo=rxotrx-274-9;     !  find sector of radio   !
rxmoc:mo=rxotrx-181-1,mpwr=43;  ! block & out make change in & deblock reload cf !
rxmop:mo=rxotrx-120-0&-1&-2&-3&-4&-6&-8;     !  find sector of trx   !
rxmop:mo=rxotrx-94-0;       ! check if EDGE site DCP2 will have many numbers    !
rapti:dev=RBLT24-762,sdev=0;        !  tel ts for device  !
rxmdp:moty=rxots,dev=RBLT24-762;   !   time slots on device   !
rxmop:mo=rxotg-60;                 !   Find SW  version !
!**********************************************************************!
!************************      TS        ******************************!
rxbli:mo=rxots-42-2-7;      !   block  !
rxlti:mo=rxots-42-2-7;      !  test    !
rxble:mo=rxots-42-2-7;      !   de-block   !
rxmsp:mo=rxots-107-8-6&&-7;    !  status  !
!***********************************************************************!
!*********************           CF       ******************************!
!***********************************************************************!
rxbli:mo=rxocf-24,force,subord;            !   block    !
rxese:mo=rxocf-24,subord;               !    out of service            !
rxesi:mo=rxocf-24,subord;               !   in service                 !
rxble:mo=rxocf-24,subord;               !   de-block                   !
rxcdp:mo=rxotg-24;                      !  MO  configuration           !
rxmfp:mo=rxocf-24;                      !    fault                     !
rxmsp:mo=rxocf-181;               !    stat                      !
rxbli:mo=rxotf-45;                       !    TF                        !
rxtei:mo=rxotf-47;                       !    TF  test                  !
rxble:mo=rxotf-45;                       !    TF                        !
!***********************************************************************!
!*********************      TG     *************************************!
!***********************************************************************!
rxmfp:mo=rxotg=102;            !    fault    !
rxmsp:mo=rxotg=102;           !     status   !
rxbli:mo=rxotg-19,subord;    !  block   !
rxese:mo=rxotg-19,subord;     !  out of service  !
rxesi:mo=rxotg-118,subord;    !  in service   !
rxble:mo=rxotg-118,subord;    !  de-block    !
!*************************************************!
!********  Find ROUTE using UPD    ****************!
!*************************************************!
dtdip:dip=1648up5;
ntcop:snt=upetnam-1649,dipinf;
stdep:dev=updnam-39552&&-39575;
!*************************************************!
!***********     BLOCKING SUPERVISION ROUTES  ****!
!**************************************************!
ALLIP:acl=a1;
allip:acl=a2;
allip:acl=strsp:r=all;
rrpar;         !   corrects Transcoder pool config timeout   !
strsp:r=IM7598O;     !  status survey !
strdp:r=I47879I;
exdep:dev=BT4M-122;
ntcop:snt=ET4M-5,dipinf;
dtstp:dip=31RBLT;    !  stat dip   !
stdep:dev=BT4M-120&&-143;      !   show status  !
blodi:dev=UPDNAM-13845;      !    block dev  !
dtbli:dip=31RBLT;       ! block dip    !
dtidc:dip=31RBLT,lc=0,frs=0;      !   dig path trans, init data, chanbge    !
dtble:dip=31RBLT;         !   de-block dip    !
dtstp:dip=31RBLT;         !   STATUS DIP   !
dtbli:dip=31RBLT;        !    block dig path   !
dtidc:dip=31RBLT,lc=1,frs=1;   !  dig path init data change  !
dtble:dip=31RBLT;              !de-block dig path   !
dtstp:dip=31RBLT;               !  dig path trans state print   !
stdep:dev=updna51-5544&&-5567;
blode:dev=UPDNAM-13845;      !  de-block devices  !
stdep:dev=UPDNAM-13845;
ntstp:snt=etmaltm-37;               !    stat snt   !
ntbli:snt=snt;                      !   block snt   !
ntble:snt=snt;                      !   de-block snt    !
blori:r=xxxxxxx,blt=all;            !   block route   !
blore:r=xxxxxxx;                    !  de-block route   !
seqar:r=;                            !  reset device  !
!****************************************************************************!
!*******************    Continuity check failure   **************************!
!****************************************************************************!
tccfp:dety=updnam;                !  print cont check fault data    !
stdep:dev=UPDNAM-3552;           !  print dev statew details        !
blodi:dev=UPDNAM-4890;           !  block device       !
tccci:dev=UPDNAM-3552;           !  perform cont check test     !
exdae:dev=UPDNAM-4890;           !  out of service    !
exdai:dev=UPDNAM-4890;           !   in service     !
blode:dev=UPDNAM-4890;            !   de-block devices   !
stdep:dev=updnam-3552;     !   print dev state  !
strdp:r=jklvm1o;              !   print route dev state   !
!****************************************************************************!
!**************    Seizure Supervision of Devices (BSC)  ********************!
!****************************************************************************!
allip:acl=a2;
Rasap;         ! Prints state of devices, if continually busy assign to switch !
Rasar:dety=ralt3;       ! Resets supervision alarm, ralt3/ralt24 !
Rasar:dety=ralt24;       ! Resets supervision alarm, ralt3/ralt24 !
!*******************************************************************************!
// Cell Logical Chan Seiz Sprvsn SDCCH/TCH
Rlvlp;    ! Prints supervision of cells, all should be Included !
Rlvap;    ! Prints any busy channel sites (Test T1) !
Rlvar:chtype=sdcch;  ! Resets supervision !
Rlvar:chtype=tch;  ! Resets supervision !
!*******************************************************************************!
!*********************    GPRS     *********************************************!
!*******************************************************************************!
rrgbp;                  !    status GPRS     !
radrp:dev=rtgphdv-66;    !   find rp   !
fcrws:rp=86,ws=sep;      ! force seprate rp   !
blrpe:rp=86;             !   re-intergrate rp   !
rrvbi:nsvci=16233;       !       lock nsvci    !
rrvbe:nsvci=16233;       !     un-lock nsvci    !
!********************************************************************************!
!*******************       CP FAULT    *******************************************!
!********************************************************************************!
dpwsp:           !     check if both sides are working    !
repci;           !     show fault                         !
remci:mag=cpu-b,pcb=stud-0;     !   b & 0 can change      !
recci;           !      tries to repair fault             !
repce;           !      ends diaolgue if necessare        !
!********************************************************************************!
!*******************     RP FAULT     *******************************************!
!********************************************************************************!
repri:rp=129;                      !   pcb find    !
remri:rp=129,pcb="sbc-rp";         !   maint test   !
recri:rp=129;                      !   in service   !
!*********************************************************************************!
!***********************       EM   FAULT       **********************************!
!*********************************************************************************!
repri:rp=128,em=;                     !     pcb find        !
remri:rp=128,pcb="scp-rp",em=;        !   maint test        !
recri:rp=1128,em=;                    !    in service       !
!*********************************************************************************!
!**********************         CELL       ***************************************!
!*********************************************************************************!
mgcep:cell=j172a;          !     msc command to frind bsc         !
rldep:cell=at0668a;        !      cell description data     !
rlstp:cell=at0668a;        !    check if cell is haulted    !
rlstc:cell=at-668a,state=haulted;     !  hault cell     !
rlstc:cell=at0668a,state,active;       !   activate cell   !
mgcap;                     !   get vlr address      !
aploc;                     check if APG or IOG / type exit   !
!****************************************************************!
!***************     NET X     *********************************!
!**************
*************************************************!
test system;         !    NETX connectivity test    !
end test;            !    end test     !
!***************************************************************!
!*****************      SIZE       ALT         ******************!
!***************************************************************!
dbtsp:tab=saactions;
sybue;
saali;
allip:alcat=apz;
sybfp:file;
sybup:file=relfsw2;
sybfp:file;
sytuc;
sybui:disc;
allip:alcat=apz;
!********************************************************************!
!***************       SOFTWARE ERRORS     **************************!
!********************************************************************!
syrip:survey;
laslp:bn=h'025c;
syrae:rectype=softerr;
syrae:rectype=applerr;
syrae:event=4;
syrip:event=28;
!*********************************************************************!
!****************UPD   DIGITAL   PATH   FAULT    SUPERVISION   *******!
!*********************************************************************!
DTDIP:DIP=788UP5;
NTCOP:SNT=ETNA51-16,DIPINF;
stdep:dev=UPDNA51-18912&&-18935;      !   show status  !
blodi:dev=UPDNA51-18912&&-18935;      !    block dev  !
dtbli:dip=788UP5;       ! block dip    !
dtidc:dip=788UP5,lc=0,frs=0;      !   dig path trans, init data, chanbge    !
dtble:dip=788UP5;         !   de-block dip    !
dtstp:dip=788UP5;         !   STATUS DIP   !
dtbli:dip=788UP5;        !    block dig path   !
dtidc:dip=788UP5,lc=1,frs=1;   !  dig path init data change  !
dtble:dip=788UP5;              !de-block dig path   !
dtstp:dip=788UP5;               !  dig path trans state print   !
stdep:dev=UPDNA51-18912&&-18935;
blode:dev=UPDNA51-18912&&-18935;      !  de-block devices  !
stdep:dev=UPDNA51-18912&&-18935;
!********************************************************************!
!*********************     TRA CHANNELFAULT    ***********************!
!*********************************************************************!
allip:acl=a2;
ntcop:snt=RTTAH1S-0;       !  show device on snt   !
stdep:dev=RTTGD-256&&-511;        !  show status          !
rrtbi:dev=RTTAH1D-2&&-31,force;    !  block devices        !
ntstp:snt=RTTAH1S-0;                  !  status snt            !
ntbli:snt=RTTAH1S-0;                  ! block snt          !
nttei:snt=RTTAH1S-0;             !  test snt see next if still in fault  !
ntble:snt=RTTAH1S-0;                  !  de-block snt      !
rrtbe:dev=RTTAH1D-2&&-31;          !  de-block device      !
radrp:dev=RTTAH1D-2&&-31;          !  find rp         !
blrpi:rp=327;                   !  block rp       !
blrpe:rp=327;                   !  de-block rp     !
rrtpp:trapool=all;              !  call going throu     !
!************************************************************************!
!******************     SNT FAULT     **********************************!
!************************************************************************!
ntstp:snt=ECP-138;            !   status snt    !
ntcop:snt=RTTAH1S-0;     !    get dip & devices   !
ntstp:dip=dip;             !  status dips   !
ntbli:snt=ECP-138;             !    block snt     !
nttei:snt=ECP-138;             !  test snt see next if still in fault  !
ntble:snt=ECP-138;              !  de-block snt    !
!****************   if still in fault *********************!
radrp:dev=dev;       !  get rp and cm   !
exemp:rp=em=em;       !  get rp twin stat em - same as cm   !
dtbli=dip;             !  block dip  !
dpecs:rp=twin,cm=cm;    !  swap tp twin rp  !
blrpi:rp=twin-rp;       !  block twin  !
blrpe:rp=twin-rp;        !  de-block twin rp  !
dpecs:rp=prim-rp,cm=cm;    !  swap back to primary rp    !
blrpi:rp=prim-rp;     !  block primary rp   !
blrpe:rp=prim-rp;      !  de-block prime rp   !
dtble:dip=dip;         !   de-block dip    !
!*******************************************************************!
!**************    BILLING GATEWAY  *******************************!
!*********************************************************************!
infsp:file=FLMSC60MET1-DE012115,dest=OSSMETRICA;  !prints file transfer info code !
infti:file=FL05ORA,dest=VSSOUTHEAST,equip=ftam;   ! forces the file through !
saosp;   ! APZ Type    33=IOG     40=APG    !
infup;
IMLIT:SPG=0;
ilbli:port=1-1-1-1;
ilble:port=1-1-1-1;
end;
!************************   AP FILE PROCESS FAULT           *********************!
allip:alcat=apz;
APLOC;
ALIST
afpls -ls FLMSC60MET2-NO291415 VSSOUTHEAST | findstr FAILED
afpfti -f FLMSC60MET2-NO291415 OSSMETRICA
afpls -ls NYMSC019 OSSMETRICA | findstr FAILED
EXIT
!********************************************************************************!
!********************************************************!
!********PVC     SET-UPFAIURE   ******************************!
!********************************************************!
imlit:spg=0;        !   use for reason 10 ip congestion    !
ilbli:port=1011104;
ilble:port=1011104;
end;
ilnpp:port=all;                  ! if NTNA  find port   !
!**********************   DE BLOCK PORT      ************************************!
IMLCT:SPG=0;
ILBLI:NP= 1- 1- 3- 1;
ILBLE:NP= 1- 1- 3- 1;
END;
imlit:spg=0;
ilnpp:port=all;                  ! if NTNA  find port   !
!*************************************************************************!
!********************************************************************************!
!***************    ROUTE  Commands BLOCKING SUPERVISION    *********************!
Strsp:r=IM17G0O;                                           ! Device State  Survey! 
Strdp:r=IM17G0O;                                       ! Print DEV State in Route!
SEQAR:R=WAS2G2O;                                           !  CLEAR ALARM        !
EXDEP:DEV=UPDNA51-53424;                              !   FIND SNT FOR THE DIP    !
ntcop:snt=ETNA51-26,dipinf;                           !  Find  DIP INFO from SNT  !
Dtstp:dip=2226UP5;                          !    STATE of T1       dp63ou         !
dtqup:dip=463up5;
blodi:dev=UPDNA51-63912&&-63935;                     !     BLOCK DEV             !
blode:dev=UPDNA51-63912&&-63935;                     !   DE BLOCK DEV     !
STDEP:DEV=updna51-53424&&-53447;                     !   show status      !
!********************************************************************************!
!*********************     ROUTE  Commands BLOCKING SUPERVISION    **************!
seqar:r=IM17G0O;
stdep:dev=UPDNA51-10896;
exdrp:dev=UPDNA51-10896;
Strsp:r=n1312eo;                                     !     Device State  Survey  ! 
Strdp:r=DRPG2UO;                                     ! Print DEV State in Route  !
SEQAR:R=;                                            !     CLEAR ALARM           !
blodi:dev=UPDNA51-53424&&-53447;                     !     BLOCK DEV             !
blode:dev=UPDNA51-4296&&-4319;                     !   DE BLOCK DEV     !
STDEP:DEV=updna51-4296&&-4319;                     !   show status      !
EXDEP:DEV=UPDNA51-3192;                              !   FIND SNT FOR THE DIP    !
ntcop:snt=ETNA51-2,dipinf;                           !  Find  DIP INFO from SNT  !
!********************************************************************************!
!        BLOCKING SUPERVISION OF DEVICE                                          !
!*******************************************************************************!
stbsp:dety=rttaf1d;
!************************   AP FILE PROCESS FAULT           *********************!
allip:alcat=apz;
APLOC;
ALIST
afpls -ls FLMSC60MET2-NO291415 VSSOUTHEAST | findstr FAILED
afpfti -f FLMSC60MET2-NO291415 OSSMETRICA
afpls -ls NYMSC019 OSSMETRICA | findstr FAILED
EXIT
!********************************************************************************!
!***************************    Distributed GROUP SWITCH     *******************************!
GDBLI:UNIT=TSM-A-29;
GDTEI:UNIT=XM-B-0-2;
GDBLE:UNIT=XM-B-0-2;
!********************************************************************************!
!************************** GROUPSWITCH  ******************************!
GSSTP:TSM=TSM-A-29;
GSBLI:TSM=TSM-A-29;
GSTEI:TSM=TSM-A-29;
GSBLE:TSM=TSM-A-29;
!**********************   DE BLOCK PORT      ************************************!
IMLCT:SPG=0;
ILBLI:NP=1- 1- 2- 2;
ILBLE:NP=1- 1- 2- 2;
END;
imlit:spg=0;
ilnpp:port=all;                  ! if NTNA  find port   !
!********************************************************************************!
!*********************  GOOD   BACKUPS     **************************************!
sybue;
sybfp:file;
sybup:file=relfsw2;
sybfp:file;
sytuc;
sybui:disc;     !  will be disc or nothing !
sycli;     ! turn command log on    !
!********************************************************************************!
!*********************      cell logic channel seizure            ***************!
rlvar:chtype=sdcch;
!*********************************************************************!
!    RADIO TRANSMISSION IP GATEWAY FAULT     RESET  RP                         !
!    IPDEV            GW      !
!    RTIPGPH-0    BOTH         !
!    exemp:rp=all,em=all;       !
!    Look for the RTIPGPH device, example is AT3BSC4 you will see RP80, EM8 = RTIPGPH-0  !
!   exemp:rp=80,em=8;               !
!   You want to reset the RP        !
fcrws:rp=80,ws=sep;
blrpi:rp=80;
blrpe:rp=80;
!********************************************************************************!
!********************     CP,IO,GS    Commands **********************!
dpwsp;                                    !    Print CP states                   !
syrip;                                    !    Print CP  restart data            !
syrae;                                    !    End restart alarm                 !
 
iostp;                                    !    print i/o device status           !
gsstp;                                    !    print group switch state          !
ntstp:snt=all;                            !    print SNT working state           !
ntcop:sntp=sntp;                          !    print SNT connections to TSM      !
ntcop:snt=all,dipinf;                     !    print SNT connection data         !
!********************************************************************************!
!***********************   CHECK    SPG   Event Log          ********************!
IMMCT:SPG=0;                                   !   Enter SPG Dialogue            !
IMCSP;                                         !   Find Executive node           !
IMALP:NODE=A;                                  !   Print SPG Event log           !
END;                                           !   Exit SPG Dialogue             !
!********************************************************************************!
!*************************      DIP / T1   **************************************!
DTQSR:DIP=137RB3,DEGR;
Rxapp:mo=rxotg-101;                         !    List DIP INFO device             !
radep:dev=RBLT24-2424;                      !    Get SNT   from DEV               !
ntcop:snt=ETRBLT4-101,dipinf;                   !    Find  DIP INFO from SNT          !
Dtstp:dip=45rb3;                          !    STATE of T1       dp63ou         !
rxmsp:mo=rxocf-363;                        !    Check  State                     !
rxcdp:mo=rxotg-371;                        !    TG  Configuration                !
dtqup:dip=137RB3;                         !   Digital T1 Quality                !
dtqsp:dip=703UP53;                          !   Print Quality SUP OBJ for DIP     !
dtqsr:dip=137RB3;        ! sf,df,bff    Reset DIP  SF   DF  Alarm         !
dtdip:dip=DP74OU;                          !   SNT   for DIP                     !
dtbli:dip=69RB3;                           !   Block DIP                         !
dtble:dip=69RB3;                           !   DE-Block  DIP                     !
dttle:dip=10rblt,loop=tslot=all;           !   End Loop TEST 1 for all TS        !     
tpstp:sdip=1etm3;                          !  Status SYNC Path                   !
tpcop:sdip=1etm3;                          !  Print DIPs on Sync Path            !
tpbli:sdip=1etm3,lp=vt15-10;               !  Block  VT  layer ob SDIP           !
tpble:sdip=1etm3,lp=vvt15-10;              !  DE-Block   VT  layer on SDIP       !
!**************************** CHECK DEVICES ON DIP   ****************************!
DTDIP:DIP=2RB3;
NTCOP:SNT=ETM3-0,DIPINF;
RXMDP:MOTY=RXOTRX,DEV=RBLT3-71;            !  MO DEVICE INFO                     !
!*****************   DEPEC A DIP  -FALT CODE NONE-  ALSO SNT ALARM    ***********!
DTDIP:DIP=111RBLT;
NTCOP:SNT=ETRBLT4-111,DIPINF;
RADRP:DEV=RBLT24-2664&&-2687;
EXRUP:RP=143;
EXEMP:RP=143,EM=15;
DPECS:RP=142,CM=15;
DPECS:RP=143,CM=15;
!*******************   MISC  ********************************!
rrpar;   ! transcoder pool  !
plldp;   ! processor load   !
Allip:acl=a3;
RLCRP:CELL=ALL;                            !   ALL SITES ON BSC                  !
caclp;                                     !   check switch clock accuracy       !
APLOC;         !  if unknown is an iog20    !
CPDLIST
imlct:spg=0;       !  if knows  is definetly iog20    !
end;
IPCONFIG
EXIT
RLSBP:CELL=NJ5835C;                          ! CHECK IF CELL BARRED         !
EXRPP:RP=64;                        !   SHOW RP     !
EXEMP:RP=66,EM=ALL;                !    LIST    EM  DATA   !
GDSTP;                             !   GROUP SWITCH STATE   !
ctrai:msisdn=12017572377;
infsp:file=ttfile00,dest=bgw05;         !print billing file info    !
infsp:file=ttfile00,dest=BGW05,order=last;     !  billing  !
saosp;            !  47,48   print apz version   operating sys data   !
lasyp:spg=0,vnode=b;
plldp;      !  show traffic on bsc    !
saosp;      !   47,48   print apz version operating sys data    !
aploc;   ! if knows ALIST  is apg   EXIT  !
alist
imlct:spg=0;
dpwsp;        !    cp state     !
rlsbp:cell=AT0826B;     !   if CB is yes site is new!
end;
infi:file=relcmdhdf-0002823,dest=paross1;
stdep:dev=rblt24-74;
!******************      SS7      DESTINATIONINACCESSABLE     ****************!
s7rsp:dest=all;            !   routing spec print  ls=   or dest=all     !
s7lsp:ls=211-173-196;       !    ss7   link set data print      !
s7lai:ls=211-147-227,slc=1;                   !    activate signalling link    !
!******************************************************************************
**************SS7 SIGNALING LINK UNAVAILABLE   *******************************!
S7LSP:LS=211-147-227;                                   !     SS7 LINK SET DATA      !
S7LAE:LS=211-147-227,SLC=1,FORCE;                      !  DIACT. OF SIG. LINK    !
S7LAI:LS=211-147-227,SLC=1;                                !   ACTIVATE SIG. LINK      !
S7LSP:LS=ALL;                           !   VERIFY. THAT LINK IS REST.       !
!********************       SS7 DESTINATION INACCESSIBLE    ******************!
S7DEP:DEST=211-147-227;  !   YEILDS DESTINATION   docserv/syseng/ss7/pcode ^f  !
S7RSP:DEST=211-173-205;              !    IF AVAILABLE        YEILDS STATUS        !
S7LAE:LS=211-147-227,SLC=0;        !    BLOCK      !
S7LAE:LS=211-147-227,SLC=1;         !   BLOCK      !
S7LAI:LS=211-147-227,SLC=0;         !   DEBLOCK     !
S7LAI:LS=211-147-227,SLC=1;         !   DEBLOCK      !
ALLIP;
STRDP:R=IM5960O;702
 
INMCT:SPG=0;
INFIP;
EXIT
EXIT;
QUIT;
 
END;
!**************    AP PROCESS      APG40    ********!
aploc;
alist
cluster res /stat
acease 6023:0
alist
exit
!*****************************************************
PLLDP;           !   PROCESSOR   LOAD   PRINT    !
!-------BILLING in IOG 20----------!
Infup;                                               !Lists all files!
Infdp;                                               !List all file destinations!       
Infsp:file=TTFILE00,dest=WEPBGW1,order=last;         !Show master file info!
Infsp:file=TTFILE00-2929,dest=WEPBGW1;               !Show subfile info!