JAY FLYING CAR (JAYFC) - TECHNICAL
(3D graphic rendering by Engr. June A. Yasol- schematic representation only, details subject to change and not to scale)
THE POWER PLANT
Preferred Air-cooled Volkswagen/ Rotary/ Lycoming Type Engine.
THE PROPELLER ROTOR
Graduated Sliding Stick control for push and
pull action of Hydraulic Actuator to connecting levers for 90 degree range tilting of Propeller Tube Rotor for vertical
to horizontal flight maneuver
Wrap-around Steel Alloy Frame. Frontwheel, Disc Brake, Independent Suspension, Coil Spring with Cylindrical Shock Absorber and Stabilizer Bar. Rearwheel, Drum Brake, Leaf Spring Suspension, Gas Shock Absorber and Stabilizer Bars. Steering Box- Levers/ Tire Rods.
THE SCHEMATIC EXTERIOR FINISH
'Aerodynamic and Lightweight Carbon Graphite, Fiberglass or
Aluminum Sheet Fuselage. Pull up Hood for Front Engine compartment, Sensors,
Data Collectors & Probes and Rear Compartment for Fuel Tank, Hydraulic Pump
and Power Supply systems. Directional
Front Air- Spoilers, Side Ailerons, Rear Elevators, Rudder and Propeller
Rotor Tubes with Rear Stabiliser Wings (wing form and rotor blade subject to change). Head-Turning and Beacon Lights, Side
Mirrors, Windshield Wipers, Antenna. Four- Wheeler. (Potential SPONSOR Logos on Body Surface)
NOTE: ALL TECHNICAL DETAIL IMAGE ARE REPRESENTATIVE ONLY OF THE COMPLETE MAKE OF THIS AUTHORS DESIGN IDEA OF A FLYING CAR AND AS PER EXISTING AVIATION STANDARDS AND SAFETY REQUIREMENTS, FINAL DETAILS MAY VARY UPON ACTUAL APPLICATIONS.
FLYING CAR ENGINE OPTIONS:
THE ROTARY ENGINE:
ROTORCRAFT FLYING CAR LINEAGE
THE CARTERCOPTER by Jay Carter
Trade Top Secret- No Detail Explanation
THE DRIVE TRAIN
THE STEERING SYSTEM
Handwheel Steering Shaft with Universal Joint Lnkages
clutched down to Steering Box for Ground Wheel maneuver and clutched up for Pullleyed Cable Linkages on flight
Wing’s tilting Shaft Levers for directional turn control. Optional directable
tail pipe for exhaust air turn inducing propellant
Twin- Bucket Seats, Pull-up Cockpit Door , Control Panel- Navigation and Avionics Instruments, GPS device, Radio System, Sensor Gauges, Shiftable Common Steering Handwheel for Ground Wheels or Flight Wings control, Brake/ Clutch/ Accelerator Foot Pedals. Shift Sticks for Ground Wheel Drive or Flight Rotor Blades Power Torque Transmission, Graduated Hand Sticks for Flight Accelerator Control and Propeller Rotor Tube Directional Control.
THE SAFETY DEVICES
for Safety Devices. Springing Car Parachute (Spring-wired edge nylon cloth lining arranged inside roof ceiling
and cord connected to four main corner of fuselage braces at center of gravity)
Quick Release Pull Latch operated for deployment
in case of emergency. Free Rotating Blades will also aid in cushioning the
impact of emergency landing and
handwheel steerable wings will guide vehicle to safety landing zone. Back-up
Power and Electric Motor provision allow Hydraulic control of directable
Propeller Rotor Tube. Optional Air-bags.
NOTE: FINAL SHOP DRAWING WILL BE EXECUTED UPON PROJECT IMPLEMENTATION AND PARTS FABRICATION IN THE ABSENCE OF FLYING CAR ADAPTABLE COMMERCIAL STOCK PLANE PARTS.
FLYING CAR GEARBOX OPTIONS:
THE BASIC GEARBOX FOR MODIFICATION WITH PTO:
THE AIRSCOOTER by Walter Norris