ij.start.canon/tr7520

Ij.start.canon TR7520 Setup

Before you begin the new ij.start.canon/tr7520 setup, make sure to unbox it as per the instructions given in the user guide. Power on your Canon Pixma TR7520, load papers into the input tray, and insert the ink cartridges into its slot. To connect your printer to the computer wirelessly, first, you need to turn on your Wi-Fi router.


How To Setup Canon Pixma TR7520?

  1. Turn On your printer and enable the Wi-Fi network option on your printer.

  2. Tap the Wi-Fi icon, followed by LAN settings.

  3. Select Wireless LAN Wireless LAN setup Manual Connect.

  4. Now the printer will look for available wireless networks.

  5. Select your wireless router from the list, type the passphrase, and tap the OK button.

  6. Now your printer is connected to the wireless network.

  7. Install the Canon printer driver on your computer as per the instructions and try a test print.


Canon Pixma TR7520 Unboxing Setup

Canon Pixma TR7520 Setup

To set up the Canon Pixma TR7520 printer, follow the instructions as given below.


  1. Open the top opening of the package by removing the outer-top tape.

  2. Use a knife or pair of scissors to remove the outer tape.

  3. Take all the components out of the package out and place them on a table.

  4. Make sure to remove all the packing tapes from your Canon printer.

  5. After removing the packing tapes from the Canon ij.start.canon/tr7520 setup, connect the power cable between the printer and the computer.

  6. Power on your printer, open the cartridge door, and wait for the cartridge carrier to move into the access area.

  7. Unpack the new cartridge and place it into the printer.

  8. Close the cartridge access door. Get a stack of plain paper to fill the input tray.

  9. Open the input tray, fill it with the stack of paper, and close the tray door.

  10. Install the printer driver on your computer. Connect the printer and the computer through a canon tr7520 wireless setup network.


Canon Pixma TR7520 Driver & Manual Download

To download the ij.start.canon/tr7520 setup driver to your computer, navigate to the driver section and click the Download Driver button below it. Follow the on-screen guidelines provided by the Canon Pixma TR7520 driver installer to finish the Pixma driver installation.The Canon Pixma TR7520 manual contains essential information for the first-time Pixma users, such as basic operation, printing from smart devices, replacing cartridges, and maintenance instructions. Troubleshooting guidelines for the Pixma TR7520 is also provided in this canon TR7520 setup manual. To download the Canon Pixma TR7520 Setup manual, navigate to the Manual Download button and click on it.

Canon Pixma TR7520 Duplex Printing

  1. Extend the input tray and load enough plain papers into it.

  2. Prior to printing, you have to make a few changes to the print settings.

  3. Launch the Canon Printer driver setup window on your system.

  4. Select the Page Setup tab and mark the checkbox near the Duplex Printing option.

  5. Also, highlight the checkbox near the Automatic option to enable automatic duplex printing.

  6. Now, select a Layout from the three options displayed.

  7. Next, you have to set up the Print Area and then tap OK.

  8. The stapling side will be selected by default in the next step. If you want to change it, then use the Stapling Side option to do so.

  9. Assign a Margin Width and tap OK to save the settings.

  10. Search for the document you want to print and open it. Go to the File menu and choose the Print option.

  11. Key in the number of copies and tap Print.

Canon Pixma TR7520 Scan

Learn how to scan your documents or images with the help of the instructions provided here.

Scan with Canon Pixma TR7520 Setup

How To Scan On Canon Pixma TR7520?

  1. Position the documents to be scanned on the platen.

  2. The scan side should face downwards. Go to the Start menu and choose the All Apps option.

  3. Select the Canon Utilities option followed by the IJ Scan Utility option.

  4. Click the Settings option and change any settings in the Settings dialog box that appears.

  5. Click on the Document Scan option and select the Source based on your choice.

  6. Assign a Color Mode, Document Size, and Resolution in the next step.

  7. Click the OK button. Choose the Document option and make use of the instructions displayed on your screen.

  8. Click OK, and the scanning process will begin.