HP Printer Drivers

Setup & download HP printer drivers

Let’s get started setting up your HP printer! If you have recently added a new HP printer in your home or a current printer is just not working correctly, or at all - there are some easy solutions you can try.

Download HP Printer Drivers (Manually)

Update HP printer driver using the HP Support site

• 1. You will need to know a few details about your printer (Product Name & Model ID, and what is your Windows operating system). Also, the directions below may vary slightly based on the Windows operating system you are using.

1. One you have located these items on your printer for step 1 you can then visit the HP support website 123.hp.com/setup.

2. You will need to navigate the HP Support site to find the HP Printer Drivers section.

3. Once you find the correct section of the site you will need to run a search for your “HP (your model name)” printer .

4. If the HP support site correctly finds your printer it will load the printer driver page. You will then need to find the correct driver install package for your Windows Operating system.

5. Once the file is downloaded you will need to find the .EXE (executable) you got from HP and right-click to run or double-click the file.

6. The installation to run and find your printer, however this tool may not let you know when there are future driver updates and may need further configuration to get your printer to work properly.

7. Remember, Driver Support can monitor the HP printer drivers for you as a service and make sure you always have the most up to date drivers.

Steps for HP Printer Drivers Download and Install

Here, you will find the steps for the hp printer software setup. This includes downloading a 123 hp printer driver and installing printer software instructions.

• 1. To begin with, power on your new HP printer and the devices (MAC or Windows).

  2. Next, open any web browser of your choice (Chrome, Safari, or Mozilla). Go to the 123.hp.com/setup.

  3. Know your printer model number from the HP Printer control panel. Type in your hp printer model number, to avail of the best printer software package.

  4. Pick the Basic software or Full-featured printer driver based on your operating system.

  5. Next, click on the Download option, this will initiate the download process in a few seconds.

  6. Then, go to the Download folder and locate the printer software file.

  7. Finally, Run the software file on your computer to enjoy the printing experience.

  8. Continue with HP Printer driver installation for Windows or Mac using on-screen instructions.

Configure HP on a printer from 123.hp.com/setup

Unzip BACK by pressing the power button 123.hp.com/setup. Once the noise has been activated for the first time for the first time, within a few minutes you will find a screen that allows you to distinguish the selected language, country / region and press the "OK button".

Step 1: After setting all of these printer screens, ask them to insert the cartridge. To insert the cartridge into the printer, use the privilege of the printer and lift the best cover patterns on the left side. Start inserting the cartridge with three colors, also make sure you are inserting the right cartridge as mentioned on the cover. Turn the orange tape that covers the electrical contacts between the beakers by removing the tab.

Step 2: When loading the HP printer cartridges, you will find the Tri color and textured cartridge struts under the lock lever. Close the lock lever by inserting the cartridge correctly.

Step 3: By doing this, your printer automatically recognizes that you have installed HP cartridges on the printer. In addition, you will receive a message from the tenant panel and print it to continue.

Step 4: After installing your cartridge, reload the paper into the tray. The paper can be any size (it can vary depending on the printer) and this is great. The printer recognizes and prints the page placed on the slide in the paper tray.

Step 5: After printing your page, you need to check by placing the glass at the top of the printer cover / scanner. Follow the instructions in your guide on paper. After trying the scanner lid, it will prompt you for the scan you need to print OK on the printer screen. After scanning the page, you will receive a "ALIGNMENT SUCCESSFUL" message from the tenant panel. Tab to continue OK.

Step 6: Using the product linked to the printer or independently from the printer, you would be able to connect the printer to your remote association. The system configuration can be changed from printer to printer.

Step 7: Then use "NOT NOW" and then press "OK" at that point to get the store updates.