MioMap Tools & Info


Home  |  Mio 3.2 skins |  Mio 3.3 skins |  Elements  |  Schemes  |  Info  |  Hack  |  RukBar |  Mirror

Mio Homepages

 

Where To Buy Mio GPS

C520

C310x

C710

H610

C220

Prices up / down / no change

 

Tools

 

Info and Reviews

 

iGO 2006+ / Mio 3.3 Skin Usage

  • Mio 3.3 skins on iGo 2006+:

     [interface]
     mio=1
     skin="mio"

  • iGO 2006+ skins on Mio 3.3:

     [interface]
     mio=0
     skin="igo_se1"

  • Other Settings (3.2 only?)

        [interface]
        mio=1                 ; (for use mio, "0" for use iGO)
        base="uip_mio/"    ; (could try igo_se1 or mio
        basel="ui_mio/"     ; (could try igo_se1 or mio

 

Scheme Item Colors

  • These are the route color parameters:

    ;=====================================
    ; Label Colors
    ;=====================================
    planned_road = "",230,75,0    ;red center
    planned_road_ext = "",0,0,0   ;black border

  • These are the arrow color parameters:

    ;=====================================
    ; System colors
    ;=====================================
    carcolorint = 0,0,64,255      ;blue center
    carcolorext = 0,255,255,255   ;white border

  • These can be found in color.ini within the schemename.zip files.

Key Mapping (in Miomap)

  • Within data.zip find keybind.txt

      [default]
      C1="ZOOMIN"
      C2="ZOOMOUT"
      C3="SWITCH_MAP_COCKPIT"
      C4="ROUTEINFO"
      C5="MAINMENU"
      UP="TILTDOWN"
      DOWN="TILTUP"
      LEFT="ROTATELEFT"
      RIGHT="ROTATERIGHT"
      DIAL="MINIMIZE"
      END="MINIMIZE"
      JOGUP="VOLUMEUP"
      JOGDOWN="VOLUMEDOWN"

  • To override the button action you can change the above or set it for your devide:

      [MIOC710]
      C4="SWITCH_MAP_COCKPIT"
      JOGUP="ZOOMIN"
      JOGDOWN="ZOOMOUT"

 

C710 BT LED Disable / BT Off

 

 

 

1) Go into settings

 

 

 

2) Select BT and then the BT Setup option

 

 

 

 

 

 

 

3) Select config (bottom left)

 

 

 

 

 

 

4) Uncheck both boxes, then press the ok/tick...

5) Exit the config screen and the BT LED should now be off...

 

 

6) To re-enable just go back and check the boxes...

7) To re-disable you have to check both boxes, exit config and then repeat 1-3...

 06/27/07

8) Turns out that 'sometimes' I can just ckick the BT Icon with the red cross in it and it switches off...  but not always...  then I need to do the above!

 

Sys.txt Options

[debug]

slowsim=1

;reverse the yes=no fast flyover

show_pedestrian=1

;enables 'person' icon when in pedstrian mode with some skins e.g. Andy SKX and robertut

show_oneway=0

;adds arrow on one-way roads but also on both sides for some 2 way roads. 

loop_sim=1

;loops flyover until tap 

no_tmc=-1

;removes TMC icon from GPS config screen 

show_gps_pos=1

;shows a small dot on the map where the actual GPS position is when locked to road 

show_speed_limit=1

;adds a min/max? speed to road names, not legal speed limit, routing speed data 

 

[speedcam]

usemio=-12,90,37,27

 

[interface]

mio=1

mapfontscale=130

;increases map font scale, 100 default, iGO 2006+ and MioMap 3.3 only

landscape=0

portrait=1

width=240

height=320

base="uip_mio/"

basel="uip_mio/"

 

- - -

 

[debug]

smart_2d=1

;not sure what this does yet

show_optional_routeinfo=1

;not sure what this does yet 

show_icons=1

;not sure what this does yet 

builtupborder=1

;not sure what this does yet 

show_segmentdir=1

;not sure what this does yet 

show_uturn=1

;not sure what this does yet 

show_mapid=0

;not sure what this does yet 

show_segmentid=0

;not sure what this does yet 

show_roadid=0

;not sure what this does yet 

show_residentonly=1

;not sure what this does yet 

clickygps=1

;not sure what this does yet 

showcenter=1

;not sure what this does yet 

 

Track Export Enable

MioMap 3.2

1] Unzip your data.zip (it is found in My Flash Disk\miomap\MioMap\data.zip)
2] Find func_tracking_320_240.ui in your directory ui_mio.
3] Open the file with a text editor like Notepad. It's actually an editable xml file.
4] Find this line and remove the word " hide" near the end:

<BUTTON uib_track_export x=133 y=200 text= " Export " bmp= " btn_bott65.bmp#3 " align= " CENTER " fontsize=12 w=58 valign= " CENTER+5 " fonttype=buttonlabel1 onrelease=' TRACKING_EXPORT lb_tracks' hide>

so that it looks like this instead:

<BUTTON uib_track_export x=133 y=200 text= " Export " bmp= " btn_bott65.bmp#3 " align= " CENTER " fontsize=12 w=58 valign= " CENTER+5 " fonttype=buttonlabel1 onrelease=' TRACKING_EXPORT lb_tracks'>

5] Save the file.
6] Re-zip your data file back to data.zip
7] Copy data.zip back to your device.
 

iGO 2006+

1] Unzip your data.zip (it is found in My Flash Disk\iGO 2006\data.zip)
2] Find tracking_320_240.ui in your directory \igo_se1\320_240\ui3] Open the file with a text editor like Notepad. It's actually an editable xml file.
4] Find this line and remove the word " hide" near the end:

<BUTTON xxx template=btnbottom80 x=200 text="Export" onrelease='run sc_export_current_track' hide>

so that it looks like this instead:


<BUTTON xxx template=btnbottom80 x=200 text="Export" onrelease='run sc_export_current_track'>

5] Save the file.
6] Re-zip your data file back to data.zip
7] Copy data.zip back to your device.

eBay Items