Fire Alarm System

Zone alarms will display on the office and party room panel. 

If the alarm was triggered by a fire / smoke detector or pull box the fire department is notified.
 
ABC Fire calls the GT's office number when an alarm is activated. 

The alarm self resets when it gets a good signal, if it's just a  trouble signal, open circuit, or temporary loss of signal.

Loss of signal can happen from electronic equipment interference or anything else interfering with the signal from the repeater unit in the attic of the building to the box in the party room. 

Alarms from pull stations, fire/smoke detector must be reset manually. 

The Lyndhurst Fire department will reset the system after the situation is resolved.