Shotgun Microphones

AT875R

SPECIFICATIONS:

  
ELEMENT    Fixed-charge back plate, permanently polarized condenser

POLAR PATTERN    Line + gradient

FREQUENCY RESPONSE    100-20,000 Hz
LOW FREQUENCY ROLL-OFF    na

OPEN CIRCUIT SENSITIVITY     -30 dB (11.2 mV) re 1V at 1 Pa

IMPEDANCE    350 ohms

MAXIMUM INPUT SOUND LEVEL    Phantom: 130 dB SPL, 1 kHz at 1% T.H.D.
Battery: 115 dB SPL, 1 kHz at 1% T.H.D.

NOISE    na

DYNAMIC RANGE (typical)    na

SIGNAL-TO-NOISE RATIO    74 dB, 1 kHz at 1 Pa

PHANTOM POWER REQUIREMENTS    11-52V DC, 2 mA typical
BATTERY    na
 
BATTERY CURRENT / LIFE    na
 
SWITCH    na
WEIGHT    80g
DIMENSIONS    21mm X 175mm (Diameter X Long)
OUTPUT CONNECTOR    Integral 3-pin XLRM-type
ACCESSORIES FURNISHED    windscreen; protective carrying case

 

Audio-Technica AT875 Short Condenser Shotgun Microphone for Video Applications

Condition: New
Price $239.95
Item #023995AT875R
MSRP $259.00   Save $19.05
Shipping $3.95 to the 48 contiguous states USA UPS



The length (175mm) of the AT875R Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off.

It operates on battery or phantom power.


    * Designed to fit into a professional HDTV DV-CAM for professional recording, broadcasting and film/TV/video production
  
 * Short length is well-suited for ENG, outdoor recording and other specialized uses
  
 * Provides the narrow acceptance angle desirable for long-distance sound pickup
 
  * Excellent sound rejection from the sides and rear of mic
    * Operates on phantom power
  
 * Come with short XLR cable and optional mic clip/clamp
    * Matt finish black in color





View Cart

Filmmoto® Gear Catalog
XLR Cables • Shockmount • Boompole
Comments