Run Status
 
  1 Home
  2 Objective
  3 Installation
  4 The problem
  5 Problem - Details
  6 Start IDF editor
  7 Add Version
  8 Building Object
  9 Time Step
10 Run Control
11 Location
12 Design Day
13 Material Regular
14 Construction
15 Zone
16 Surface Geometry
17 Surface Heat Transfer
18 Schedule Type
19 Schedule Compact
20 Controlled Zone Equip Config
21 Zone Equipment List
22 Purchased Air
23 Zone Control Thermostatic
24 Dual Setpoint with Deadband
25 Report Variable
26 Report Meter
27 Report
28 Start EP launch
29 Select the IDF file
30 During Simulation Run
31 Run Status
32 Click DXF
33 Drawing in VoloView
34 Click Orbit button
35 3D view of the Drawing
36 Output data in Excel

free web site hit counter

After the simulation is over or EnergyPlus encounters an error, the DOS shell will close and the focus will go back to the EP-Launch programme. A status window will open and show the number of warnings and errors along with time elapsed.  If you have entered the data correctly and installation of EnergyPlus is correct you will not get any errors. Press OK.

 

If there are errors press the “ERR: button in the “Quick Open Panel for Single Simulation” window. This is a small window below the EP-Launch window. The error file will be opened in Notepad. Try to understand the error and fix it. If the problem still persists, mail me your IDF file at energyplustutorial[at]gmail.com

 

 

Click DXF button >>