M462 462nm Laser Diode

2W M462 462nm Laser Diodes

This is a 5.6mm Diode

Max suggested current 1.8A. For more details see testing at the bottom of listing.

Out Of Stock

M462 462nm Diode 

$50

Free US shipping on order over $50 or Express USPS $20. 

First Class International $14 "Not Tracked"(Offered On Orders Under $350 Orders Over will Default to DHL Express Tracked $55-$80)

Or

Express DHL 5-7 Day $55-$80

Check out can not calculate based on your address. You will be charged $80 when selecting Express which is the max and I will refund difference if there is any. Usually only remote deliver is the full $80 most destinations are around $60 and Mexico and Canada are about $50.

Shipping to Russia is via USPS Express Only for $65

Back Half and Lens Options

AL:Aluminum CU:Solid Copper Back Half HLCU:Half Lens Solid Copper CUDS:Solid Copper With Driver Shelf

NL: No Lens 2EG: Two Element Glass Lens 3EG:Three Element Glass Lens G2: G-2 Glass Lens

All copper back half options make direct thermal contact with the base of 9mm diodes or the base of the copper diode mount on modules for 3.8mm/5.6mm diodes

Aluminum back halfs have for a free floating compact driver to be installed by connected directly to the pins where no additional driver heasinking is required

The 20mm and 25mm Copper with Driver Shelf options have a pocked machined to thermally bond a compact driver in the back of the module for higher current builds

All the drivers I carry except the Blackbuck 8M will work as a compact driver for the above configurations

2W M462 462nm Laser Diode

Spot size. Now this the best I could do at the moment. I will try to get a picture more aligned later but it is a pain. The spot/line on the M462 is just a little smaller than the M140 and less splash from dye reflection.

Now for the power test. No animals were harmed in the making of this test but two poor diodes were mortally wounded.:gun:

!!!Not Suggested to proceed past this point. 1.8A Max Suggested!!!

!!!Zombified!!!:cryyy:

Zombie running @ 800mA still does 550mW but if you try to increase it looses power....

So that is it for now More info to be added as it comes in.

*Disclamer*

By purchasing these diodes you are agreeing to the following.

- You are over 18 years of age .

- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.

- You will use these as components and properly incorporate them into a finished product.

- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.

- You are legally responsible for the use of these components, improper use of these components or their end products.

- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.

- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.